This study was undertaken to determine incidence, associated risk factors, and clinical outcomes of a diastasis of pubic symphysis. Among 4,151 women, who delivered 4,554 babies at the Department of Obstetrics of Seoul National University Bundang hospital from January 2004 to December 2006, eleven women were diagnosed as having a symptomatic diastasis of pubic symphysis. We estimated the incidence of the diastasis and identified the associated risk factors. To evaluate the pain relief and reduction of diastasis we followed up the 11 diastatic patients. The incidence of the diastasis was 1/385. Primiparity (P = 0.010) and twin gestation (P = 0.016) appeared as risk factors for diastasis by univairable analysis; and twin gestation appeared to be the only risk factor (P = 0.006) by logistic analysis. Two patients were operated due to intractable pain; and the remaining nine patients were treated conservatively. The diastatic gap decreased to less than 1.5 cm by 2 to 6 weeks after the diagnosis and then remained stationary. At a mean follow-up of 22.1 months (range, 12 to 47 months), five of 11 patients had persistent symphysis pubis dysfunction. Diastasis is more frequent than generally acknowledged. Pregnant women with multiple gestations should be informed about the potential risk of pubic symphysis diastasis.
Adolescent ; Adult ; Birth Weight ; Female ; Follow-Up Studies ; Gestational Age ; Humans ; Incidence ; Logistic Models ; Male ; Middle Aged ; Peripartum Period ; Pregnancy ; Pregnancy, Twin ; Pubic Symphysis/radiography ; Pubic Symphysis Diastasis/diagnosis/*epidemiology ; Risk Factors ; Young Adult

PURPOSE: Anthropometry can be divided into two methods, direct anthropometry and indirect anthropometry. The most ideal and accurate method is a direct anthropometry. However, it is difficult to measure in the case of children because of poor cooperation, and it lacks re-productivity. Cast model has advantages of three dimensional featuring, inexpensive and easy fabrication. This study is conducted to find out an accuracy of indirect anthropometry on cast model by comparing it with direct anthropometry. METHODS: Total 48 cleft lip nasal deformity patients (unilateral, 40; bilateral, 8) were included in this study. Cast models were made before surgery under general anesthesia with alginate impression material and model plaster. Eleven linear measurements among 7 landmarks were taken as direct anthropometry before surgery with Castroviejo spreading caliper. At the same time, indirect anthropometry on cast model was done at the same linear distances as well. RESULTS: Of the total 11 linear measurements, both ala lengths, both columella lengths, nose width, projective distance between facial insertion points of the ala, projective distance between the alar base points, right nostril floor width, and columella width were statistically correlated between indirect anthropometry on cast model and direct anthropometry. However, the nasal tip protrusion and the left nostril floor width were not statistically correlated. CONCLUSION: Accuracy of indirect anthropometry on cast model can be influenced by cast model fabrication techniques and correct identification of landmarks. Nasal tip protrusion could be reduced by compression of the nasal tip in the process of cast model fabrication and nostril floor width can be varied by muscle relaxation of anesthetics and incorrect identification of subalare in cleft lip nasal deformity. If sufficient care is taken to make cast model and to define landmarks exactly, indirect anthropometry on cast model can be a reliable method as direct anthropometry.
Anesthesia, General ; Anesthetics ; Anthropometry* ; Child ; Cleft Lip* ; Congenital Abnormalities ; Humans ; Muscle Relaxation ; Nose*

PURPOSE: Anthropometry can be divided into two methods, direct anthropometry and indirect anthropometry. The most ideal and accurate method is a direct anthropometry. However, it is difficult to measure in the case of children because of poor cooperation, and it lacks re-productivity. Cast model has advantages of three dimensional featuring, inexpensive and easy fabrication. This study is conducted to find out an accuracy of indirect anthropometry on cast model by comparing it with direct anthropometry. METHODS: Total 48 cleft lip nasal deformity patients (unilateral, 40; bilateral, 8) were included in this study. Cast models were made before surgery under general anesthesia with alginate impression material and model plaster. Eleven linear measurements among 7 landmarks were taken as direct anthropometry before surgery with Castroviejo spreading caliper. At the same time, indirect anthropometry on cast model was done at the same linear distances as well. RESULTS: Of the total 11 linear measurements, both ala lengths, both columella lengths, nose width, projective distance between facial insertion points of the ala, projective distance between the alar base points, right nostril floor width, and columella width were statistically correlated between indirect anthropometry on cast model and direct anthropometry. However, the nasal tip protrusion and the left nostril floor width were not statistically correlated. CONCLUSION: Accuracy of indirect anthropometry on cast model can be influenced by cast model fabrication techniques and correct identification of landmarks. Nasal tip protrusion could be reduced by compression of the nasal tip in the process of cast model fabrication and nostril floor width can be varied by muscle relaxation of anesthetics and incorrect identification of subalare in cleft lip nasal deformity. If sufficient care is taken to make cast model and to define landmarks exactly, indirect anthropometry on cast model can be a reliable method as direct anthropometry.
Anesthesia, General ; Anesthetics ; Anthropometry* ; Child ; Cleft Lip* ; Congenital Abnormalities ; Humans ; Muscle Relaxation ; Nose*

PURPOSE: Adenoid cystic carcinoma is a rare type of eccrine sweat gland carcinoma. Although it is mostly known as a neoplasm of the salivary gland, it could occur as a primary skin tumor. We present a patient with a primary cutaneous adenoid cystic carcinoma at the genital area. METHODS: A 60-year-old man had a slowly growing 1 cm sized single tender mass near the left scrotum and he underwent excisional biopsy at a local clinic. A diagnosis of adenoid cystic carcinoma was made and thus he was transferred to our hospital. In physical examination, other specific findings were not detected except a linear scar caused by a previous skin biopsy near the left scrotum. In CT scan, PET-CT scan and endoscopy, there was no evidence of neoplasm in other organs. It was diagnosed as the primary cutaneous adenoid cystic carcinoma and then wide excisions were performed including total 4.5cm margin of normal skin. RESULTS: Microscopic findings revealed proliferation of tumor cell islands with cribriform or tubular patterns containing several round, pseudocystic structures. The tumor cells showed basaloid cells with uniform and small nuclei. Tumor cells infiltrated into the dermis and upper portion of subcutaneous tissue. There was multifocal perineural invasion of tumor cells. In postoperative 6 months, we found no recurrence and other complications. CONCLUSION: Herein we found a rare case of primary cutaneous adenoid cystic carcinoma at the genital area.
Adenoids ; Biopsy ; Carcinoma, Adenoid Cystic ; Cicatrix ; Dermis ; Endoscopy ; Humans ; Islands ; Middle Aged ; Physical Examination ; Recurrence ; Salivary Glands ; Scrotum ; Skin ; Subcutaneous Tissue ; Sweat Glands

PURPOSE: The aim of this study was to evaluate changes in the bearing surface of an alumina head and cup insert after difficult intraoperative reduction of the head. MATERIALS AND METHODS: In two consecutive cases, where the force required for reduction caused scratching on the edge of the acetabular metal shell and marginal cracking of the adjacent portion of the alumina insert, the reduced alumina head was dislocated and retrieved with the alumina cup insert. The changes of the bearing surface were evaluated by gross inspection and by scanning electron microscopy(SEM) and energy dispersive x-ray spectrometry (EDAX). RESULTS: In both cases, the scratched area of the alumina head was found to have discolored. SEM and EDXA showed the discoloration to be the result of metallic debris from the titanium alloy shell. The metallic debris that was transferred from the head also stained the bearing surface of the alumina insert. CONCLUSION: Metallic debris might increase bearing surface wear. If the cracked ceramic fragments from the cup insert are neglected, it is also possible that they could be trapped between bearing surfaces and increase wear.
Acetabulum ; Alloys ; Aluminum Oxide ; Arthroplasty, Replacement, Hip* ; Ceramics ; Head* ; Spectrometry, X-Ray Emission ; Titanium

Purpose: We evaluated the results of cementless acetabular revisions performed with morselized bone grafting and screw-fixed hemispherical cups with different surface treatments. Materials and Methods: Forty hips, which had been followed for more than 10 years, were included in this study. Reconstruction was performed with 10 hydroxyapatite (HA)-coated cups and 30 porocoated ones. The mean followup time was 12 years and 1 months (range, 10 years to 15 years). Re-revision or radiographic loosening was considered as an endpoint of follow-up. Results: The average Harris hip score improved from 52 points to 75 points. During the follow-up period, radiographic loosening was observed in 17 hips. The loosened implants were HA-coated cups in 8 hips and porocoated ones in 9 hips. In 14 of these, re-revision of the cups was performed. The re-revision rate was 20% for the porocoated cups and 80% for the HA-coated cups. There were 2 hips with liner wear, which had undergone liner and head changes. Bone grafts were united in all the hips. The average time to union was 5.2 months (range, 2 to 9 months), and the average time to incorporation was 12 months (range, 5 to 18 months). Conclusion: Our results imply that HA-coated cups have a significantly higher failure rate compared with the porocoated ones (P<0.05) after a minimum follow-up of 10 years. Morselized bone grafting with use of a porocoated cup is an effective modality, which can restore the bone loss of the acetabulum in revision total hip arthroplasty.
Acetabulum* ; Arthroplasty, Replacement, Hip ; Bone Transplantation ; Durapatite ; Follow-Up Studies* ; Head ; Hip ; Transplants

We describe the case of a healthy young man with a femoral head fracture by low-energy trauma that occurred without evidence of hip dislocation. While plain radiographs showed no definite fracture or dislocation, computed tomography (CT) and magnetic resonance imaging (MRI) revealed a femoral head fracture with a wedge-shaped cortical depression at the superomedial aspect of the femoral head. Our patient reported feeling that the right hip had been displaced from its joint for a moment. This probably represented subluxation with spontaneous relocation. The characteristic findings and possible mechanisms of this fracture were postulated on the basis of the sequential 3 dimensional-CT and MRI. The clinical results of conservative treatment were better than those of previously reported indentation fractures.
Femur Head/*injuries ; Hip Fractures/*diagnosis/etiology ; Humans ; Magnetic Resonance Imaging ; Male ; Tomography, X-Ray Computed ; Young Adult

This study examined salivary flow and salivary pH and the prevalence and levels of cariogenic bacteria in the saliva of oncological patients and healthy controls. Quantitative real-time polymerase chain reaction was used to assess the levels of microbes including Streptococcus mutans, Streptococcus sobrinus, Lactobacillus salivarius, and Lactobacillus acidophilus in the saliva of 41 patients with a solid tumor (SO), 30 patients with a hematologic malignancy (HE), and 40 healthy controls. Salivary flow and pH were lower in oncological patients than in controls. The frequencies of all four cariogenic bacteria were highest in the SO group. S. mutans and L. salivarius were the most commonly detected in all three study groups. Mean numbers of S. sobrinus and L. salivarius in the SO group were significantly higher than in controls (p<0.05). There were no significant differences between patients and controls with respect to mean numbers of S. mutans and L. acidophilus in saliva. However, the proportions of S. mutans, S. sobrinus, and L. salivarius versus total bacteria in the SO group were significantly higher than in controls. Within patients, both mean numbers and the proportions of S. mutans and S. sobrinus were significantly different (p<0.05). In summary, significant differences were found in salivary pH values and the levels of S. mutans, S. sobrinus, and L. salivarius between SO patients and healthy controls.
Bacteria ; Hematologic Neoplasms ; Humans ; Hydrogen-Ion Concentration ; Lactobacillus ; Lactobacillus acidophilus ; Prevalence ; Real-Time Polymerase Chain Reaction ; Saliva ; Streptococcus ; Streptococcus mutans ; Streptococcus sobrinus

PURPOSE: The purpose of the current in vitro study was to evaluate the transfer of metal to both alumina and cobalt-chrome (Co-Cr) heads that were scraped by a titanium alloy surface under different load conditions. MATERIALS AND METHODS: Alumina and Co-Cr heads were scraped by an acetabular metal shell under various loads using a creep tester. Microstructural changes in the scraped area were visualized with a scanning electron microscope and chemical element changes were assessed using an energy dispersive X-ray spectrometry. Changes in the roughness of the scraped surface were evaluated by a three-dimensional surface profiling system. RESULTS: Metal transfer to alumina and Co-Cr heads began to be detectable at a 10~15 kg load, which could be exerted by one-handed force. At loads of 30, 50 kg, fissures occurred on the head surfaces in addition to metal transfer. CONCLUSION: This study reveals that metallic debris was transferred from the titanium alloy acetabular shell to both alumina and Co-Cr heads by minor scraping. When the contact force increased, scratching of the head surface occurred in addition to the transfer of metal. The results of this study suggest that the greatest possible effort should be made to protect femoral heads, regardless of material, from contact with metallic surfaces during total hip arthroplasty.
Acetabulum* ; Alloys ; Aluminum Oxide* ; Arthroplasty, Replacement, Hip ; Head* ; Spectrometry, X-Ray Emission ; Titanium

BACKGROUND: The number of human immunodeficiency virus (HIV)-infected patients is increasing constantly, and it is well known that there is a significantly high prevalence of osteonecrosis of the femoral head in HIV-infected patients. Therefore, it is important to develop methods that can ensure the safety of both the patients and medical personnel who participate in surgery on HIV-infected patients. Recently, the authors performed 8 procedures on 5 HIV-infected patients. This paper reports our experience. METHODS: This study examined the medical records and radiological studies of 5 HIV-infected patients who had undergone surgery around the hip joint from January, 2005 to September, 2007. During the procedures, their mean age was 38.6 years (range, 23 to 53 years) and all were male. Four of them were under an anti-retroviral therapy program. The reasons for the operations were nonunion of the femoral shaft after trauma in two patients and osteonecrosis of both femoral heads in three. One autologous bone grafting, one screw fixation with autologous bone grafting, five total hip replacement arthroplasties, and one multiple drilling were performed. All procedures were carried out according to the guidelines of HIV infection control made by the Korea Centers for Disease Control and Prevention. The mean follow-up period was 16.6 months (range, 4 to 37 months). RESULTS: The preoperative CD4 count was 130 in one patient, and 200 to 499 in the other 4. The viral loads were 15100 and 420 in two patients, and negative in the other 3. Bony union was achieved in those who had undergone autologous bone grafting. There were significant improvements in both the Harris Hip Score and functional state in those who had total hip replacement arthroplasty. There were no immediate postoperative complications, such as infection. During the follow-up period, one patient died from esophageal variceal bleeding. However, no surgery-related complications were observed in the other 4 patients. CONCLUSIONS: There were no significant complications in HIV-infected patients after the operations around the hip joint when their preoperative immunity was optimal. In addition, the safety of medical personnel can be assured when the operation is performed in line with the guidelines of HIV infection control.
Adult ; *Arthroplasty, Replacement, Hip/adverse effects ; Bone Transplantation ; CD4 Lymphocyte Count ; Femoral Fractures/complications/*surgery ; Femur Head Necrosis/complications/*surgery ; Fractures, Ununited/complications/*surgery ; HIV Infections/*complications/immunology/transmission/virology ; Humans ; Infectious Disease Transmission, Patient-to-Professional/prevention & control ; Male ; Middle Aged ; Postoperative Complications ; Viral Load ; Young Adult