The choice of friction interface has always been a controversial topic in hip arthroplasty. Although the metal-on-metal (MoM) interface has gradually faded out of our vision, its revision is a clinical difficulty. Adverse reactions to metal debris (ARMD) is the most common indication for MoM hip arthroplasty revision, and the clinical results of hip arthroplasty due to ARMD are not satisfactory. At present, the indications and suggestions for revision of ARMD are not uniform. In this article, the clinical diagnosis, indications of revision, risk factors of prognosis, intraoperative suggestions and reasons for revision of ARMD were summarized. This article briefly introduces the diagnosis and treatment strategies and precautions of hip arthroplasty due to ARMD, in order to provide reference for such patients in clinical practice.
Arthroplasty, Replacement, Hip/adverse effects* ; Hip Prosthesis/adverse effects* ; Humans ; Metal-on-Metal Joint Prostheses/adverse effects* ; Prosthesis Design ; Prosthesis Failure ; Reoperation

Arthroplasty, Replacement, Hip ; adverse effects ; Hemangiosarcoma ; diagnosis ; Hip Joint ; pathology ; surgery ; Hip Prosthesis ; Humans

OBJECTIVEThe present study aimed to review the characteristics and influencing factors of squeaking after ceramic-on-ceramic (CoC) total hip arthroplasty (THA) and to analyze the possible mechanisms of the audible noise.

DATA SOURCESThe data analyzed in this review were based on articles from PubMed and Web of Science.

STUDY SELECTIONThe articles selected for review were original articles and reviews found based on the following search terms: "total hip arthroplasty", "ceramic-on-ceramic", "hip squeaking", and "hip noise."

RESULTSThe mechanism of the squeaking remains unknown. The possible explanations included stripe wear, edge loading, a third body, fracture of the ceramic liner, and resonance of the prosthesis components. Squeaking occurrence is influenced by patient, surgical, and implant factors.

CONCLUSIONSMost studies indicated that squeaking after CoC THA was the consequence of increasing wear or impingement, caused by prosthesis design, patient characteristics, or surgical factors. However, as conflicts exist among different articles, the major reasons for the squeaking remain to be identified.

Arthroplasty, Replacement, Hip ; adverse effects ; Ceramics ; therapeutic use ; Hip Prosthesis ; Humans ; Noise ; adverse effects ; Osteoarthritis, Hip ; surgery

Arthroplasty, Replacement, Hip ; adverse effects ; Female ; Humans ; Prosthesis Design ; Prosthesis Failure ; Risk Factors

OBJECTIVEAccording to the information obtained from the revision of total hip arthroplasty, the situations of the artificial femoral stem under physiological stress were analyzed preliminarily. In order to accumulate clinical experience, the discussions about how to enlongate the life of artifical joints were performed.

METHODSFifty-three patients required revision operations were selected, including 28 males and 25 females,with an average age of 74.66 years old (61 to 84 years old). The average life of artificial joints was 18.24 years (3 to 27 years). The initial weightbearing was started 11 days (5 to 16 days) after the first operation. The main reasons for the revision were the spontaneous loosening and trauma. Based on imaging and surgical findings, as well as the histological pathology, the situations of the stems in human bodies were determined.

RESULTSFemoral prosthesis would sink under physiological stress. The design of femoral stems, motion of patients', and bone growth determined the secondary stability. Straight stems were helpful for physiological subsidence of prosthesis, achieving the stability with close bone-implant contact by bone growth,which allowed the patient to do early landing exercise. The collared prosthesis and prosthesis combined with internal fixation limited the subsidence of femoral stems. Their stability depends on the time of initial placement and the bone growth for supporting. Delaying the inital weightbearing was suggested for patients with these protheses.

CONCLUSIONAccording to the actual situation of the patients, the appropriate chosen of femoral stems and time to perform the weightbearing can extend the life of the femoral prosthesis.

Aged ; Aged, 80 and over ; Arthroplasty, Replacement, Hip ; adverse effects ; methods ; Female ; Hip Prosthesis ; Humans ; Male ; Middle Aged ; Prosthesis Design

Periprosthetic infection after hip replacement is a clinical catastrophic disease, which often leads to the failure of the prosthesis. It needs the combination of systemic antibiotics to cure the infection, which brings huge burden to doctors and patients. There are strict indications for debridement and one-stage revision of the prosthesis, and few cases meet the requirements. The second revision is still the gold standard for the treatment of periprosthetic infection. It is suitable for all infection conditions and has a high success rate. On the second phase of renovation, the antibiotic sustained release system plays a key role, and the carrier of antibiotic sustained-release system is the focus of current research, including classic bone cement and absorbable biomaterials. Bone cement has strong mechanical strength, but the antibiotic release shows a sharp decline trend; the absorbable biomaterials can continuously release antibiotics with high concentration, but the mechanical strength is poor, so it could not use alone. The combination of bone cement and absorbable biomaterials will be an ideal antibiotic carrier. PMMA is the most commonly used antibiotic carrier, but the antibiotic release concentration is decreased sharply after 24 hours. It will be difficult to control the infection and increase the risk of bacterial resistance if it is lower than the minimum inhibitory concentration. The biodegradable materials can release antibiotics completely, with long release time and high concentration, but low mechanical strength. Antibiotic spacer plays an important role in the control of infection. In the future, how to further extend the antibiotic release time of antibiotic sustained-release system, increase the amount of antibiotic release and maintain the mechanical strength of the material will be studied.
Anti-Bacterial Agents/therapeutic use* ; Arthroplasty, Replacement, Hip/adverse effects* ; Bone Cements ; Hip Prosthesis ; Humans ; Prosthesis-Related Infections/surgery* ; Reoperation

PURPOSE: This study analyzed the long-term results of cementless total hip arthroplasty using an extensively porous coated stem in patients younger than 45 years old. MATERIALS AND METHODS: The clinical and radiographic results of 45 hips from 38 patients who underwent cementless total hip replacement arthroplasty with an AML prosthesis were reviewed retrospectively. The average follow-up was 12 years (range, 10-15 years). RESULTS: The average Harris hip score at the time of final follow-up was 87.3 (range 77-94) points. Forty two hips (93.3%) showed excellent and good clinical results. Osteolysis occurred around the stem in 20 hips (44.4%) and around the cup in 26 hips (57.8%). Stress-mediated femoral resorption was observed in 33 hips (73.3%) at 10 years. There was no incidence of resorption progressing after 5 years postoperatively. There was no stem loosening. Five hips were revised for osteolysis, cup loosening and polyethylene wear. CONCLUSION: The long term results of total hip arthroplasty using an extensively porous coated stem were acceptable, and there was no case involving the progression of proximal bone resorption.
Adult ; Arthroplasty, Replacement, Hip/*adverse effects ; Female ; Hip Prosthesis/*adverse effects ; Humans ; Male ; Osteolysis/etiology ; Retrospective Studies ; Treatment Outcome

BACKGROUNDThe imaging evaluation of pain in patients who have had a hip arthroplasty (HA) is challenging, and traditional imaging techniques, including magnetic resonance imaging (MRI) and computerized tomography (CT), are limited by metallic artifact. The purpose of the present study was to investigate the use of modified MRI techniques to visualize periprosthetic soft tissues and the bone-implant interface, and to evaluate the value of MRI for the assessment of patients with painful hip arthroplasty.

METHODSFifty-six painful hips in fifty-six patients following primary HA were assessed using optimized MRI, CT and standardized radiographs. The diagnosis of MRI was correlated with intraoperative findings as well as with microbiological and histological examinations (when available). The sensitivity and the specificity of MRI diagnosis were determined according to final diagnosis. The chi-square test was performed to detect a difference between MRI and final diagnosis.

RESULTSForty-eight patients have received revision surgery and final diagnosis were established. MRI was demonstrated high sensitivity and specificity in detecting aseptic loosening (93% and 95%), periprosthetic infection (94% and 97%), adverse local tissue reaction (100% and 100%) and periprosthetic fracture (100% and 100%). MRI was determined to be the most sensitive technique in detecting implant loosening for any reason, with a sensitivity of 93.8% for acetabular shell and 97.1% for femoral stem, compared to 81.3% and 80.0% on CT, 75.0% and 77.1% on radiographs.

CONCLUSIONSOptimized MRI was effective for the assessment of the periprosthetic soft tissues and bone. The use of modified magnetic resonance imaging parameters provided a useful adjunct to conventional examinations for the evaluation of patients with painful hip arthroplasty.

Arthroplasty, Replacement, Hip ; adverse effects ; Hip Prosthesis ; adverse effects ; Humans ; Magnetic Resonance Imaging ; methods ; Pain ; diagnosis ; etiology ; Prospective Studies

Modular designs of hip prostheses have become popular recently. Along with complications inherent in all hip arthroplasty systems, modular systems have the additional potential for dissociation of components. Five male patients underwent total hip arthroplasties, in which all of the acetabular components were Harris-Galante II porous acetabular cups. Many years after the operation, the polyethylene liners were dissociated without any previous trauma or dislocation of the femoral heads, these dissociations and dislodgements were managed with open reduction. This complication can be predicted from clinical symptoms and signs. Roentgenograms must be taken and carefully compared to previous roentgenograms. We postulated two causes for the dissociation. First, the polyethylene liner was not fixed securely within the acetabular metal shell at the time of operation. Second, the locking mechanism of the acetabular metal shell was not strong enough to firmly hold the polyethylene liner within the acetabular metal shell. It does warrant that certain precautions must be taken when implanting modular components. The locking mechanism of the harris-Galante II porous acetabular component is mechanically weak and fails easily, therefore its design must be improved in an attempt to prevent postoperative dissociation of the polyethylene liner.
Acetabulum* ; Adult ; Case Report ; Hip Prosthesis/adverse effects* ; Human ; Male ; Metals* ; Middle Age ; Polyethylenes* ; Prosthesis Design ; Prosthesis Failure*

To solve the problem of aseptic loosening of hip joint prosthesis after THR (total hip replacement) and to meet the requirement of individual endoprosthesis for rapid automatic design and manufacture, a new method is presented. According to the anatomical shape of the patient's femoral marrow cavity and the replacement requirement, the hip joint prosthesis is designed via the combination of medical CT technique, computer aided design and finite element analysis. During analysis of the endoprosthesis, the 3-D finite element model of the femur is structured by finite element software ANSYS, the near true femoral material parameters are gained, the quantitative description of femoral material's anisotropy and inhomogeneity is realized by self-developed specific software in the 3-D finite element model of femur. Contact analyses of the customized hip endoprosthesis--femur system are simulated by ANSYS, stress, strain and their distribution are analyzed and contrasted before and after-operation under the action of physiological load in the system. It is feasible to checkout the rationality of the design by comparing the stress distribution in the femur with the situation before replacement, the extent of stress-shielding caused by the replacement is determined quantificationally. The results reveal that the method is more reasonable and reliable and can provide basic means for optimizing the design of custom-made hip prostheses and for evaluating the long-term stability of endoprosthesis after operation.
Arthroplasty, Replacement, Hip ; adverse effects ; Computer-Aided Design ; Finite Element Analysis ; Hip Prosthesis ; Humans ; Prosthesis Design ; methods ; Prosthesis Failure ; Risk Factors ; Stress, Mechanical ; Weight-Bearing