Fracture of the subtrochanteric area of the femur is one of the most difficult about the hip to manage. Many of these fractures are comminuted and result from high-energy trauma. Nonoperative treatment of these fractures may result in a significant rate of malunion, nonunion and other complications. Therefore, subtrochanteric fractures is preferred to be treated with operative methods. The Russell-Taylor classification is useful in planning the type of internal fixation. For fractures located below the level of the lesser trochanter, standard locked intramedullary nails can be used effectively. For fractures that extend into the lesser trochanter but do not involve the piriformis fossa, the options of a cephalomedullary nail versus a 95 degree fixed angle device have yielded the best results. For fractures that have proximal trochanteric extension into the area of the piriformis fossa, sliding nail screw devices may have some usefulness. The DHS implant is not employed for the treatment of subtrochanteric femoral fractures.
Hip Fractures ; surgery ; Humans

Developmental dysplasia of the hip (DDH) is a major cause of hip arthritis and ultimately total hip arthroplasty. Due to the dysplastic acetabulum, how to place the acetabular cup becomes a challenge in acetabular reconstruction for such patients. Especially in the acetabula classified as Crowe typeⅡand type Ⅲ, the dislocation of the femoral head causes bone defects above the true acetabulum, which will affect the stability of the acetabular cup when the acetabular reconstruction is performed at the true acetabulum. Many acetabular reconstruction methods such as bone grafting, the use of small acetabular cups, socket medialization technique, and high hip center technique are used to increase the host bone coverage of the cup. However, each method has its own shortcomings that can not be ignored so that there is no unified conclusion on the acetabular reconstruction methods for Crowe typeⅡand type Ⅲ hip dysplasia. This article summarized and evaluated various reconstruction methods in combination with the acetabular morphology of DDH, and put forward the research direction in the future.
Acetabulum/surgery* ; Arthroplasty, Replacement, Hip ; Developmental Dysplasia of the Hip ; Hip Dislocation/surgery* ; Hip Dislocation, Congenital/surgery* ; Hip Prosthesis ; Humans ; Treatment Outcome

The hip arthroscopy develops quickly in the past 20 years. Its use in the diagnosis and treatment of the hip injury get more notably. Many of pathologic conditions previously unrecognized through X-ray, CT or MRI have been diagnosed correctly under hip arthroscopy. The technology has become gradually a golden standard to confirm the hip discords. In the present, the examining path of the hip arthroscopy contains mainly the outside path, the anterior path, the outside-posterior path. The application range of the hip arthroscopy includes the management of labral tears, the femoroacetabular impingement, the ligamentum tear injuries, the chondral lesions, the synovical abnormalities, the intra-articular infection, the loose bodies in the joint etc. The hip arthroscopy is a comprehensive technology. Its superiority can be reflect well if the doctors are familiar with the indication, the contraindication and the operation procedure. And also the thorough physical examination and imaging examination should be made before operation, as well as reasonable and effective postoperative function training should be conducted.
Arthroscopy ; methods ; Hip Injuries ; surgery ; Hip Joint ; surgery ; Humans

The study was conducted on 55 patients (39 males and 16 females) with 56 trochanteric hip fractures related to surgical treatment trauma. These patients were treated by internal bone fixation using angle splint in Orthopedic Department of Viet- Duc Hospital from 1/2000 - 12/2001. Good and very good outcomes were reached in 82% of patients, 14% of patients had moderate and 4% had poor outcomes. Mass angle splints were used for intertrochanteric fractures: Unstable intertrochanteric fractures, trochanteric fracture with femoral neck fracture line, intertrochanteric fractures with multiple fractures in 1/3 above and 1/3 below of ipsilateral femoral bone. Intertrochanteric fractures occurred in any patient with quick movement prior event. Inter- and inferior trochanteric fractures occurred with two points. DHS is applied with most efficiency. Internal bone fixation using angle splint for intertrochanteric fractures was the most effective method. There were no complication in terms of vascular obstruction related to fat and heart failure. Setting a broken bone wass carried out in surgical position and fixed by angle splints. Separated pieces in backside and inside can be rearranged under the surgery and fixed by soft screws. Rehabilitation and follow-up exammination was needed after surgery.
Hip Fractures ; Surgery ; Therapeutics ; Splints

Fracture Fixation, Internal ; Hip Dislocation ; surgery ; Hip Fractures ; surgery ; Hip Joint ; surgery ; Humans ; Male ; Young Adult

OBJECTIVE: To investigate whether the anteversion angle of acetabular prosthesis can be evaluated on the anteroposterior X-ray film of common double hip joint. METHODS: Total 32 patients(41 hips) after total hip arthroplasty were selected, including 18 males and 14 females, aged(66.2±4.1) years. All patients completed the positive X-ray film of both hips and plain CT scan of pelvis after operation. Acetabular anteversion was measured by plain CT scan of pelvis, and measured by Saka and other measurement formulas on X-ray film. RESULTS: The acetabular anteversion measured by X-ray film was(16.2±5.0)° and that measured by CT was (31.8±9.7)°(P=0.00). In addition, there was a significant linear correlation between X-ray film and CT(Pearson correlation coefficient (r=0.84, P=0.00). CONCLUSION CT can accurately measure the acetabular anteversion, but it has obvious disadvantages, such as large radiation, high cost, phantom CT artifact and so on. Although Saka measurement formula can not directly obtain the accurate acetabular anteversion as CT measurement, it has a high correlation with the acetabular anteversion measured by CT. Therefore, the method proposed in this study can also preliminarily evaluate the acetabular anteversion.
Acetabulum/surgery* ; Arthroplasty, Replacement, Hip/methods* ; Female ; Hip Joint/surgery* ; Hip Prosthesis ; Humans ; Male ; Pelvis

Arthroplasty, Replacement, Hip ; Hip Dislocation, Congenital ; surgery ; Humans

The selection of the prosthetic material determine the success or failure of hip arthroplasty. Currently, the metals, ceramics, polymer composites and carbon materials are the main prosthetic materials of artificial hip joint. They have some progresses in biocompatibility, elastic modulus,mechanical properties, useful life, but they still can't reach the ideal standard of design. In this essay, we mainly review the characteristics and applications of the current artificial hip joint materials through its classification in order to provide a reference for choosing appropriate hip joint materials in clinic and increasing characteristic of materials. We consider the polymer composites has more advantages such as biocompatibility, mechanical properties, corrosion resistance and price, even if it has shortages in abrasion resistance. As the researches of polymer composites are main focus on abrasion resistance, articular surface and strength,and its performances are increased fast, it has a wide prospect in future.
Animals ; Hip Dislocation ; surgery ; Hip Prosthesis ; standards ; utilization ; Humans

BACKGROUNDThe acetabular teardrop is often used to guide acetabular component placement in total hip arthroplasty (THA). Placing the lower acetabular component aspect at the same level as the lower teardrop edge was assumed to restore the hip center of rotation. Here we radiographically analyzed the relationship between cup center and normal contralateral acetabulum center height on unilateral THA using this placement method.

METHODSA total of 106 unilateral THA cases with normal contralateral acetabula were reviewed and the vertical and horizontal distances in relation to the lower acetabular teardrop edge from both hip joint centers, cup inclination, and anteversion were measured radiographically. The paired t-test was used to compare left and right hip center heights. Scatter plots and Pearson's correlation coefficients were used to evaluate differences in hip center heights, cup anteversion, inclination angles, and medialized cup center distance compared to the contralateral hip joint.

RESULTSCup center height was significantly greater (P < 0.01) than contralateral hip joint center height (93.4% in the 0-5 mm range, 6.6% >5 mm). There was a weak correlation between hip center height difference and inclination (r = 0.376, P < 0.01) and between difference and anteversion (r = 0.310, P < 0.01) but no correlation between difference and outer cup diameter (r = 0.184, P = 0.058) or difference and medialized cup center distance (r = -0.098, P = 0.318).

CONCLUSIONSAlthough this method did not exactly replicate anatomic hip center height, the clinical significance of cup center height and anatomic hip center height differences is negligible. This acetabular component placement method has high simplicity, reliability, and stability.

OBJECTIVE: To investigate how to place the anteversion of acetabular prosthesis more reasonably in patients with lumbar degenerative kyphosis. METHODS: A total of 122 patients with degenerative kyphosis of lumbar spine who underwent total hip arthroplasty from December 2017 to October 2019 were included and divided into experimental group and control group, 61 cases in each group. In experimental group, there were 25 males and 36 females, with a median age of 67.0 years;the median course of disease was 46.0 months;the functional pelvic plane with acetabular anteversion was set according to different types of pelvic anterior plane bracket. In control group, there were 27 males and 34 females, with a median age of 67.0 years;the median course was 42.0 months;in control group, the anteversion was set by the traditional method. The patients were followed up for 3 months. The operation time and blood loss were recorded. The incidence of infection and dislocation within 3 months was counted. Harris score before and 3 months after operation was recorded. Functional anteversion angle of standing position was measured 3 months after operation. RESULTS: Compared with control group, there was no difference in operation time and blood loss between the two groups (P=0.918, 0.381);there was no infection between two groups within 3 months after operation;there was 1 case of hip joint dislocation in the control group and no dislocation in experimental group. There was no significant difference in Harris score before and after operation. Three months later, reexamination of pelvic standing radiographs showed that the number of patients with functional anteversion of acetabular prosthesis outside the safe area was less in experimental group thanin control group ( CONCLUSION According to the preoperative evaluation and classification of patients, better functional anteversion of acetabular prosthesis can be obtained with the help of pelvic anterior plane reference bracket in hip arthroplasty with lumbar degenerative kyphosis.
Acetabulum/surgery* ; Aged ; Arthroplasty, Replacement, Hip ; Female ; Hip Dislocation/surgery* ; Hip Joint ; Hip Prosthesis ; Humans ; Kyphosis ; Male ; Retrospective Studies