Adult ; Fractures, Bone ; diagnostic imaging ; surgery ; Hip Dislocation ; diagnostic imaging ; surgery ; Hip Fractures ; diagnostic imaging ; surgery ; Humans ; Knee Dislocation ; diagnostic imaging ; surgery ; Male ; Middle Aged ; Radiography

OBJECTIVE: To investigate the relationship between the area of psoas major muscle(PMI) and recurrent contralateral hip fracture in the initial intertrochanteric fracture. METHODS: Total of 87 patients with intertrochanteric fracture of femur from January 2008 to January 2011 were selected for CT scanning of lumbar spine and hip at the time of the first fracture, and then divided into two groups according to whether there was fracture in the contralateral hip, 13 patients in the contralateral hip fracture group, 5 males and 8 females, aged(82.30±5.66) years;there were 74 cases in the non contralateral hip fracture group, including 32 males and 42 females, with an age of (79.70±5.84) years. The gender, age, preoperative blood albumin value, operation side, body mass index(BMI), Harris score of hip joint one year after operation, Barthel index before operation and medical diseases before operation were observed and compared between two groups. The PMI was used to compare the area of psosa major on CT before operation in two groups, and the correlation between the area of PMI at the time of initial fracture and the fracture of the contralateral hip was evaluated. RESULTS: The two groups were followed up for more than 2 years after operation. There was a significant difference in PMI between two groups(P<0.05). There was a significant positive correlation between preoperative PMI and the time of re fracture of the contralateral hip(r=0.641, P=0.018). CONCLUSION There are differences in the area of PMI in patients with contralateral hip fracture, so the area of PMI can be regarded as an important risk factor for contralateral hip fracture.
Male ; Female ; Humans ; Psoas Muscles/diagnostic imaging* ; Treatment Outcome ; Hip Fractures/surgery* ; Hip Joint ; Femur

BACKGROUNDComputer-assisted procedures have recently been introduced for navigated femoral neck screw placement. Currently there is little information available regarding accuracy and efficiency of the different navigated procedures. The aim of this study was to compare two fluoroscopic navigation tracking technologies, a novel bi-planar robot navigation and standardized optoelectronic navigation, versus standard freehand fluoroscopic insertion in a Synbone hip model.

METHODSEighteen fixed Synbone hip models were divided into 3 groups. C-arm navigated cannulated screws (AO-ASIF, diameter 7.3 mm) were inserted using freehand targeting (control group). A novel bi-planar robot system (TINAV, GD2000) and an optoelectronic system (Stryker OTS Navigation System) were used for the navigated procedures (robot group and optoelectronic group). Accuracy was measured using radiographic evaluation including the measurement of screw parallelism and decentralization, and joint penetration. To evaluate the efficiency, the number of guidewire passes, operative time and fluoroscopic images taken were noted.

RESULTSThe two computer-assisted systems provided significantly improved accuracy compared to the freehand technique. Each of the parameters, including guidewire passes and number of fluoroscopy images, was significantly lower when using the computer-assisted systems than for freehand-unguided insertion (P <0.05), but operative time was significantly shorter when using freehand-unguided insertion than for the computer-assisted systems (P <0.05). Accuracy, operative time and number of fluoroscopy images taken were similar among the two navigated groups (P >0.05), but guidewire passes in the robot group were significantly less than in the optoelectronic group (P <0.05).

CONCLUSIONSBoth bi-planar robot navigation and optoelectronic navigation were similarly accurate and have the potential to improve accuracy and reduce radiation for freehand fluoroscopic targeting for insertion of cannulated screws in femoral neck fractures. Guidewire passes in the robot group were significantly less than in the optoelectronic group. However, both navigated procedures were associated with time-consuming registration and high rates of failed matching procedures.

Bone Screws ; Femoral Neck Fractures ; surgery ; Hip ; diagnostic imaging ; surgery ; Humans ; Radiography ; Surgery, Computer-Assisted ; methods

Hip Joint ; diagnostic imaging ; pathology ; surgery ; Humans ; Male ; Middle Aged ; Ossification, Heterotopic ; diagnostic imaging ; pathology ; surgery ; Radiography

BACKGROUNDA quantitative and accurate measurement of the range of hip joint flexion (RHF) is necessarily required in the evaluation of disordered or artificial hip joint function. This study aimed to assess a novel method to measure RHF more accurately and objectively.

METHODSLateral radiographs were taken of 31 supine men with hip joints extended or flexed. Relevant angles were measured directly from the radiographs. The change in the sacrofemoral angle (SFA) (the angle formed between the axis of the femur and the line tangent to the upper endplate of S1) from hip joint extension to hip joint flexion, was proposed as the RHF. The validity of this method was assessed via concomitant measurements of changes in the femur-horizontal angle (between the axis of the femur and the horizontal line) and the sacrum-horizontal angle (SHA) (between the line tangent to the upper endplate of S1 and the horizontal line), the difference of which should equal the change in the SFA.

RESULTSThe mean change in the SFA was 112.5 ± 7.4°, and was independent of participant age, height, weight, or body mass index. The mean changes in the femur-horizontal and SHAs were 123.0 ± 6.4° and 11.4 ± 3.0°, respectively. This confirmed that the change of SFA between hip joint extension and hip joint flexion was equal to the difference between the changes in the femur-horizontal and SHAs.

CONCLUSIONSUsing the SFA, to evaluate RHF could prevent compromised measurements due to the movements of pelvis and lumbar spine during hip flexion, and is, therefore, a more accurate and objective method with reasonable reliability and validity.

Adult ; Hip Joint ; diagnostic imaging ; surgery ; Humans ; Male ; Radiography ; Range of Motion, Articular ; physiology ; Sacrum ; diagnostic imaging ; surgery ; Young Adult

In a hip replacement case when a standard hip stem is chosen, it is rough to select hip stems before operation, thus some stand-up standard hip stems should be prepared. The operation time is usually prolonged. In order to solve this problem, this paper presents a method to automatically select optimal standard hip stems by computers. Femoral anatomical data of a patient are acquired from X-ray films. Based on these anatomical data and a database of average cross-sections in proximal femurs, proximal femur of the patient can be reconstructed. This proximal femur model makes it possible to optimally select a standard hip stem. Theory analyses indicate that the method, presented in this paper, is practicable.
Arthroplasty, Replacement, Hip ; instrumentation ; Computer-Aided Design ; Hip Joint ; diagnostic imaging ; surgery ; Hip Prosthesis ; standards ; Humans ; Radiography

OBJECTIVETo explore the operative indications and operative methods of primary total hip arthroplasty for acetabular fracture and to observe the clinical curative effect.

METHODSWe retrospectively summarized and analyzed the traumatic conditions, fracture types, complications, operative time, operative techniques, and short term curative effect of 11 patients (10 males and 1 female, with a mean age of 42.4 years) with acetabular fracture who underwent primary total hip arthroplasty.

RESULTSThe patients were followed up for 6-45 months (mean=28 months). Their average Harris score of postoperative hip joint was 78.

CONCLUSIONUnder strict mastery of indications, patients with acetabular fracture may undergo primary total hip arthroplasty, but stable acetabular components should be made.

Acetabulum ; diagnostic imaging ; injuries ; Arthroplasty, Replacement, Hip ; methods ; Female ; Fractures, Bone ; diagnostic imaging ; surgery ; Humans ; Male ; Middle Aged ; Radiography

Hip ; diagnostic imaging ; Histiocytosis, Sinus ; diagnostic imaging ; physiopathology ; surgery ; Humans ; Male ; Middle Aged ; Tomography, X-Ray Computed

Rotational acetabular osteotomy (RAO) is a well-established surgical procedure for patients with acetabular dysplasia, and excellent long-term results have been reported. However, RAO is technically demanding and precise execution of this procedure requires experience with this surgery. The usefulness of computer navigation in RAO includes its ability to perform three-dimensional (3D) preoperative planning, enable safe osteotomy even with a poor visual field, reduce exposure to radiation from intraoperative fluoroscopy, and display the tip position of the chisel in real time, which is educationally useful as it allows staff other than the operator to follow the progress of the surgery. In our results comparing 23 hips that underwent RAO with navigation and 23 hips operated on without navigation, no significant difference in radiological assessment was observed. However, no perioperative complications were observed in the navigation group whereas one case of transient femoral nerve palsy was observed in non-navigation group. A more accurate and safer RAO can be performed using 3D preoperative planning and intraoperative assistance with a computed tomography-based navigation system.
Acetabulum/diagnostic imaging/*surgery ; Adult ; Female ; Hip Dislocation/diagnostic imaging/*surgery ; Humans ; Imaging, Three-Dimensional ; Male ; Osteotomy/*methods ; Surgery, Computer-Assisted/*methods ; Tomography, X-Ray Computed ; Young Adult

OBJECTIVETo investigate the operative reduction techniques and clinical results of surgical treatment of type C1 (AO/ASIF) acetabular fracture by posteroproximal-posteroanterior sequential reduction and internal fixation.

METHODSFrom August 2004 to January 2012, 13 patients with type C1 (AO/ASIF) acetabular fracture were treated by posteroproximal-posteroanterior sequential reduction and internal fixation. Of them, 8 cases were male and 5 cases were female with an average age of 42 years years old (ranged, 18 to 64). Pelvis 3-dimentional CT reconstruction were used to confirmed the classification of fracture, and the operation were performed during from 5 to 20 days with an average of 9.5 days. Operation time, blood loss, complications and reduction were recorded and evaluated. The function of hip joint were accessed at the final follow-up.

RESULTSThe operation time ranged from 190 to 290 min with an average of 240 min. The mean blood loss was 1 800 ml (ranged, 1 300 to 3 000 ml). One case had superficial infection and healed after 3 weeks. According to Matta reduction criteria, 8 cases obtained anatomical reduction, 4 cases got satisfied results and 1 cases got unsatisfied results. Eleven cases were followed up with an average of (24.0 +/- 8.0) months, and 2 cases were lost to follow-up. According to revised Mede d'Aubingne and Postel evaluation system, 7 cases got excellent results, 2 good, 1 moderate and 1 poor.

CONCLUSIONPosteroproximal-posteroanterior sequential reduction and internal fixation for the treatment of type C1 (AO/ASIF) acetabular fracture can achieve satisfied surgical proces and operation quality.

Acetabulum ; diagnostic imaging ; injuries ; surgery ; Adolescent ; Adult ; Female ; Fracture Fixation, Internal ; Hip Fractures ; diagnostic imaging ; surgery ; Hip Joint ; diagnostic imaging ; surgery ; Humans ; Male ; Middle Aged ; Radiography ; Treatment Outcome ; Young Adult