No abstract available.
Crowns* ; Dental Porcelain*

Lumbar puncture is a simple bedside procedure that is essential for the diagnosis and treatment of several neurologic diseases. Known complications include headache, backache, infection, and hemorrhage, with the most common being postpuncture headache. We report a case of postpuncture spinal subdural hematoma-which is extremely rare-in a 29-year-old female. Although most cases of postpuncture spinal hematomas are associated with coagulation abnormalities, this case shows that it can occur in the absence of predisposing factors.
Back Pain ; Female ; Headache ; Hematoma ; Hematoma, Subdural, Spinal ; Hemorrhage ; Humans ; Spinal Puncture

PURPOSE: This study was conducted to obtain difference in fracture strength according to the diameter of one-body O-ring-type of mini implant fixture, to determine the resistance of mini implant to masticatory pressure, and to examine whether overdenture using O-ring type mini implant is clinically usable to maxillary and mandibular edentulous patients. MATERIALS AND METHODS: For this study, 13 mm long one body O-ring-type mini implants of different diameters (2.0 mm, 2.5 mm and 3.0 mm) (Dentis, Daegu, Korea) were prepared, 5 for each diameter. The sample was placed at 30degrees from the horizontal surface on the universal testing machine, and off-axis loading was applied until permanent deformation occurred and the load was taken as maximum compressive strength. The mean value of the 5 samples was calculated, and the compressive strength of implant fixture was compared according to diameter. In addition, we prepared 3 samples for each diameter, and applied loading equal to 80%, 60% and 40% of the compressive strength until fracture occurred. Then, we measured the cycle number on fracture and analyzed fatigue fracture for each diameter. Additionally, we measured the cycle number on fracture that occurred when a load of 43 N, which is the average masticatory force of complete denture, was applied. The difference on compressive strength between each group was tested statistically using one-way ANOVA test. RESULTS: Compressive strength according to the diameter of mini implant was 101.5 +/- 14.6 N, 149 +/- 6.1 N and 276.0 +/- 13.4 N, respectively, for diameters 2.0 mm, 2.5 mm and 3.0 mm. In the results of fatigue fracture test at 43 N, fracture did not occur until 2x106 cycles at diameter 2.0 mm, and until 5x106 cycles at 2.5 mm and 3.0 mm. CONCLUSION: Compressive strength increased significantly with increasing diameter of mini implant. In the results of fatigue fracture test conducted under the average masticatory force of complete denture, fracture did not occur at any of the three diameters. All of the three diameters are usable for supporting overdenture in maxillary and mandibular edentulous patients, but considering that the highest masticatory force of complete denture is 157 N, caution should be used in case diameter 2.0 mm or 2.5 mm is used.
Bite Force ; Collodion ; Compressive Strength ; Denture, Complete ; Denture, Overlay ; Fatigue ; Fractures, Stress ; Humans

Kikuchi disease, also called histiocytic necrotizing lymphadenitis, is an uncommon, idiopathic and generally self-limited disease, characterized by cervical lymphadenopathy. It can present systemic symptoms and signs, but ocular involvement is unusual. We report a 35-year-old woman who presented sudden decreased visual acuity and a swollen lymph node on the left side of her neck. On laboratory findings, there were no evidences of infection, autoimmune disease and systemic vasculitis. She was diagnosed with Kikuchi disease and bilateral retinal vasculitis by histologic analysis of lymph node, fundoscopy and fluorescein angiography.
Adult ; Autoimmune Diseases ; Female ; Fluorescein Angiography ; Histiocytic Necrotizing Lymphadenitis ; Humans ; Lymph Nodes ; Lymphatic Diseases ; Neck ; Retinal Vasculitis ; Retinaldehyde ; Systemic Vasculitis ; Visual Acuity

Cleft lip and palate is congenital deformity in oral and maxillofacial area. Normal soft palate has velopharyngeal closure action by connecting oral cavity and nasal cavity at rest and moving upward at swallowing and specific pronunciation. Cleft palate patients with velopharyngeal insufficiency have difficulty in mastication, swallowing and pronunciation because velopharyngeal closure is incomplete. At this time, a prosthetic device used to cover palate defects is called a palatal obturator. A palatal obturator separates oral cavity and nasal cavity and recovers pronunciation, mastication, swallowing and esthetic function. The purpose of this case study is to report the results because it reaches a satisfactory result in functional and esthetic aspects through functional impression procedures using modeling compound and tissue conditioner for restoration of a cleft palate patient with velopharyngeal insufficiency.
Cleft Lip ; Cleft Palate* ; Congenital Abnormalities ; Deglutition ; Humans ; Mastication ; Mouth ; Nasal Cavity ; Palatal Obturators* ; Palate ; Palate, Soft ; Velopharyngeal Insufficiency*

Heteratopic or ectopic pancreas is found in 0.5% to 13% autopsy series and also found one in approximately every 500 operations in abdominal surgery. The mast common sites are stomach (esp, greater curvature of the antrum), duodenum and proximal jejunum. Many ar most of these lesions do not cause clinical symptoms and the symptoms with heterotopie pancreas are nonspecific. When it produces complication(hemorrhage, pancreatitis, pyloric or CBD obstruction, pseudocyst, cancer etc.), the symytoms depend on the site of lesion, the size of mass, and the primary pathologic processes occurring within the heterotopic pancreatic tissue. Gaetrofiberoscopy revealed a small round, submucosal projection with a central niche or umblication, but this characteristic umbilication is not always present. The lesions are frequently confused with polyp, leiomyoma, intramural neoplasm, gastric ulcer and early gastric cancer, The tumors are predominantly intramural masses; 75 percent are submuicosal and the others are either intrsmuscular or subserosal. We have recently experienced a case of heterotopic pancreas on the antrum of greater curvature of stomach in 54-year-old man, who visited our hospital for melena. Gastrofiberoscopy revealed a 2 x 2 cm sized submucosal mass without bleeding focus and local excision was performed. Histologic finding showed a pancreatic acini within the gastric poper muscle layer.
Autopsy ; Duodenum ; Hemorrhage ; Humans ; Jejunum ; Leiomyoma ; Melena ; Middle Aged ; Pancreas* ; Pancreatitis ; Pathologic Processes ; Polyps ; Stomach ; Stomach Neoplasms ; Ulcer

PURPOSE: Fractures of trapezium are uncommon carpal bone fractures and often unrecognized lesions. We investigated about operative treatment of trapezium fracture. MATERIALS AND METHODS: Seven patients with fractures of trapezium were evaluated after surgical treatment with a mean follow up time of 18 months (12 months~3 years). Functional assessment (pain, limitation in activities of daily living, satisfaction), physical examination (range of motion, grip strength), and radiographic evaluation were performed. Traumatic arthritis and carpometacarpal joint subluxation were confirmed by radiograph. RESULTS: During study period, 122 cases were carpal bone fractures, and seven of 122 cases were fractures of trapezium. All cases were intra-articular fractures of trapezium. 1st carpometacarpal joint dislocation at 4 patients, Bennett's fracture at 1 patient, hamate hook fracture at 1 patient, and base of 4th proximal phalanx fracture at 1 patient were associated with fracture of trapezium. Open reduction and internal fixation were performed at 6 cases and 1st carpometacarpal joint arthrodesis was performed at 1 case because of neglected fracture. One of 6 cases which were performed to open reduction and internal fixation was reoperated to external fixation due to reduction loss. Clinically 6 patients revealed good results. one of 7 patients experienced limitation of thumb opposition. CONCLUSION: Based on the good results obtained with surgical intervention, we advocated open reduction and internal fixation for fractures with intraarticular depressed more than 2 mm or combined with Bennett's fracture or carpometacarpal subluxation.
Activities of Daily Living ; Arthritis ; Arthrodesis ; Carpal Bones ; Carpometacarpal Joints ; Dislocations ; Follow-Up Studies ; Hand Strength ; Humans ; Intra-Articular Fractures ; Physical Examination ; Thumb

PURPOSE: The purpose of this study was to investigate the fit and screw joint stability between Ready-made abutment and CAD-CAM custom-made abutment. MATERIALS AND METHODS: Osstem implant system was used. Ready-made abutment (Transfer abutment, Osstem Implant Co. Ltd, Busan, Korea), CAD-CAM custom-made abutment (CustomFit abutment, Osstem Implant Co. Ltd, Busan, Korea) and domestically manufactured CAD-CAM custom-made abutment (Myplant, Raphabio Co., Seoul, Korea) were fabricated five each and screws were provided by each company. Fixture and abutments were tightening with 30Ncm according to the manufacturer's instruction and then preloding reverse torque values were measured 3 times repeatedly. Kruskal-Wallis test was used for statistical analysis of the preloading reverse torque values (alpha=.05). After specimens were embedded into epoxy resin, wet cutting and polishing was performed and FE-SEM imaging was performed, on the contact interface. RESULTS: The pre-loading reverse torque values were 26.0 +/- 0.30 Ncm (ready-made abutment; Transfer abutment) and 26.3 +/- 0.32 Ncm (CAD-CAM custom-made abutment; CustomFit abutment) and 24.7 +/- 0.67 Ncm (CAD-CAM custom-made abutment; Myplant). The domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) presented lower pre-loading reverse torque value with statistically significant difference than that of the ready-made abutment (Transfer abutment) and CAD-CAM custom-made abutment (CustomFit abutment) manufactured from the same company (P=.027) and showed marginal gap in the fixture-abutment interface. CONCLUSION: Within the limitation of the present in-vitro study, in domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) showed lower screw joint stability and fitness between fixture and abutment.
Computer-Aided Design* ; Torque

PURPOSE: The aim of this study was to analyze the shapes of lingual polished surfaces in lower complete dentures formed by polished surface impressions and to provide reference data for use when manufacturing edentulous trays and lower complete dentures. MATERIALS AND METHODS: Twenty-six patients with mandibular edentulism were studied. After lower wax dentures were fabricated, wax was removed from the lingual side of the wax denture and a lingual polished surface impression was obtained with tissue conditioner. The definitive denture was scanned with a three-dimensional scanner, and scanned images were obtained. At the cross-sections of the lingual frenum, lateral incisors, first premolars, first molars, and anterior border of the retromolar pads, three points were marked and eight measurements were taken. The Kruskal-Wallis test and a post hoc analysis with the Mann-Whitney test were performed. RESULTS: Each patient showed similar values for the same areas on the left and right sides without a statistically significant difference. The height of the contour of the lingual polished surface at the lingual frenum was halfway between the occlusal plane and lingual border, it moved gradually in a downward direction. The angle from the occlusal plane to the height of the contour of the lingual polished surface was increased as it progressed from the lingual frenum towards the retromolar pads. CONCLUSION: The shape of the mandibular lingual polished surface was convex at the lingual frenum, lateral incisors and gradually flattened towards the first molars and retromolar pads.
Bicuspid ; Dental Occlusion ; Denture, Complete* ; Dentures ; Humans ; Incisor ; Lingual Frenum ; Molar

BACKGROUND AND OBJECTIVES: This study aimed to investigate differences in olfactory thresholds and odor discrimination between the two sides of the nose in relation to the right hand and the right eye. MATERIALS AND METHOD: Eighty subjects (40 women, 40 men) participated in this study. All were in excellent health without any nasal or health problems. The olfactory function tests designed by Connecticut Chemosensory Clinical Reserch Center (CCCRC) were performed. RESULTS: We found a slight tendency for lower thresholds and better discrimination on the right nostril; this phenomenon was not influenced by the subjects' handedness. However, the left-handers performed better at the right side compared with the left nostril than right-handers and the differences between the two sides of the nose were larger in the left-handers. There were no relationships between the ocular and nasal dominance. CONCLUSION: The data indicate that olfactory functions exhibit a certain degree of lateralization to the right side.
Connecticut ; Discrimination (Psychology) ; Female ; Functional Laterality ; Hand ; Humans* ; Nose ; Odors ; Smell