PURPOSE: To investigate the protective effect of sub-hypothermic mechanical perfusion combined with membrane lung oxygenation on ischemic hypoxic injury of yorkshire brain tissue caused by traumatic blood loss. METHODS: This article performed a random controlled trial. Brain tissue of 7 yorkshire was selected and divided into the sub-low temperature anterograde machine perfusion group (n = 4) and the blank control group (n = 3) using the random number table method. A yorkshire model of brain tissue injury induced by traumatic blood loss was established. Firstly, the perfusion temperature and blood oxygen saturation were monitored in real-time during the perfusion process. The number of red blood cells, hemoglobin content, NA⁺, K⁺, and Ca²⁺ ions concentrations and pH of the perfusate were detected. Following perfusion, we specifically examined the parietal lobe to assess its water content. The prefrontal cortex and hippocampus were then dissected for histological evaluation, allowing us to investigate potential regional differences in tissue injury. The blank control group was sampled directly before perfusion. All statistical analyses and graphs were performed using GraphPad Prism 8.0 Student t-test. All tests were two-sided, and p value of less than 0.05 was considered to indicate statistical significance. RESULTS: The contents of red blood cells and hemoglobin during perfusion were maintained at normal levels but more red blood cells were destroyed 3 h after the perfusion. The blood oxygen saturation of the perfusion group was maintained at 95% - 98%. NA⁺ and K⁺ concentrations were normal most of the time during perfusion but increased significantly at about 4 h. The Ca²⁺ concentration remained within the normal range at each period. Glucose levels were slightly higher than the baseline level. The pH of the perfusion solution was slightly lower at the beginning of perfusion, and then gradually increased to the normal level. The water content of brain tissue in the sub-low and docile perfusion group was 78.95% ± 0.39%, which was significantly higher than that in the control group (75.27% ± 0.55%, t = 10.49, p < 0.001), and the difference was statistically significant. Compared with the blank control group, the structure and morphology of pyramidal neurons in the prefrontal cortex and CA1 region of the hippocampal gyrus were similar, and their integrity was better. The structural integrity of granulosa neurons was destroyed and cell edema increased in the perfusion group compared with the blank control group. Immunofluorescence staining for glail fibrillary acidic protein and Iba1, markers of glial cells, revealed well-preserved cell structures in the perfusion group. While there were indications of abnormal cellular activity, the analysis showed no significant difference in axon thickness or integrity compared to the 1-h blank control group. CONCLUSIONS Mild hypothermic machine perfusion can improve ischemia and hypoxia injury of yorkshire brain tissue caused by traumatic blood loss and delay the necrosis and apoptosis of yorkshire brain tissue by continuous oxygen supply, maintaining ion homeostasis and reducing tissue metabolism level.
Animals ; Perfusion/methods* ; Disease Models, Animal ; Brain Injuries/etiology* ; Swine ; Male ; Hypothermia, Induced/methods*

BACKGROUND: Periodontitis is a severe chronic inflammatory disease, whose traditional systemic antimicrobial therapy faces great limitations. In-situ gels provide an effective solution as an emerging local drug delivery system. METHODS: In this study, the novel thermosensitive poloxamer/carbopol in-situ gels loaded with 20 lmol/L quercetin for the treatment of periodontitis were prepared by cold method. Thirteen batches of in-situ gels based on two independent factors (X1 : poloxamer 407 and X2 : carbopol 934P) were designed and optimized by the statistical method of central composite design (CCD). The transparency, pH, injectability, viscosity, gelation temperature, gelation time, elasticity modulus, degradation rate and in-vitro drug release studies of the batches were evaluated, and the percentage of drug release in the first hour, the time required for 90% drug release, gelation temperature, and gelation time were selected as dependent variables. RESULTS: These two independent factors significantly affected the four dependent variables (p < 0.05). The optimization result displayed that the optimized concentration of poloxamer 407 was 20.84% (w/v), and carbopol 934P was 0.5% (w/v). The optimized formulation showed a clear appearance (++), acceptable injectability (Pass), viscosity(151,798 mPa s), gelation temperature (36 °C), gelation time (213 s), preferable cell viability and cell proliferation, conformed to first-order release kinetics, and had a significant antibacterial effect. CONCLUSIONS The article demonstrates the great potential of the quercetin in-situ gel as an effective treatment for periodontitis.

BACKGROUND: Periodontitis is a severe chronic inflammatory disease, whose traditional systemic antimicrobial therapy faces great limitations. In-situ gels provide an effective solution as an emerging local drug delivery system. METHODS: In this study, the novel thermosensitive poloxamer/carbopol in-situ gels loaded with 20 lmol/L quercetin for the treatment of periodontitis were prepared by cold method. Thirteen batches of in-situ gels based on two independent factors (X1 : poloxamer 407 and X2 : carbopol 934P) were designed and optimized by the statistical method of central composite design (CCD). The transparency, pH, injectability, viscosity, gelation temperature, gelation time, elasticity modulus, degradation rate and in-vitro drug release studies of the batches were evaluated, and the percentage of drug release in the first hour, the time required for 90% drug release, gelation temperature, and gelation time were selected as dependent variables. RESULTS: These two independent factors significantly affected the four dependent variables (p < 0.05). The optimization result displayed that the optimized concentration of poloxamer 407 was 20.84% (w/v), and carbopol 934P was 0.5% (w/v). The optimized formulation showed a clear appearance (++), acceptable injectability (Pass), viscosity(151,798 mPa s), gelation temperature (36 °C), gelation time (213 s), preferable cell viability and cell proliferation, conformed to first-order release kinetics, and had a significant antibacterial effect. CONCLUSIONS The article demonstrates the great potential of the quercetin in-situ gel as an effective treatment for periodontitis.

BACKGROUND: Periodontitis is a severe chronic inflammatory disease, whose traditional systemic antimicrobial therapy faces great limitations. In-situ gels provide an effective solution as an emerging local drug delivery system. METHODS: In this study, the novel thermosensitive poloxamer/carbopol in-situ gels loaded with 20 lmol/L quercetin for the treatment of periodontitis were prepared by cold method. Thirteen batches of in-situ gels based on two independent factors (X1 : poloxamer 407 and X2 : carbopol 934P) were designed and optimized by the statistical method of central composite design (CCD). The transparency, pH, injectability, viscosity, gelation temperature, gelation time, elasticity modulus, degradation rate and in-vitro drug release studies of the batches were evaluated, and the percentage of drug release in the first hour, the time required for 90% drug release, gelation temperature, and gelation time were selected as dependent variables. RESULTS: These two independent factors significantly affected the four dependent variables (p < 0.05). The optimization result displayed that the optimized concentration of poloxamer 407 was 20.84% (w/v), and carbopol 934P was 0.5% (w/v). The optimized formulation showed a clear appearance (++), acceptable injectability (Pass), viscosity(151,798 mPa s), gelation temperature (36 °C), gelation time (213 s), preferable cell viability and cell proliferation, conformed to first-order release kinetics, and had a significant antibacterial effect. CONCLUSIONS The article demonstrates the great potential of the quercetin in-situ gel as an effective treatment for periodontitis.

BACKGROUND: Periodontitis is a severe chronic inflammatory disease, whose traditional systemic antimicrobial therapy faces great limitations. In-situ gels provide an effective solution as an emerging local drug delivery system. METHODS: In this study, the novel thermosensitive poloxamer/carbopol in-situ gels loaded with 20 lmol/L quercetin for the treatment of periodontitis were prepared by cold method. Thirteen batches of in-situ gels based on two independent factors (X1 : poloxamer 407 and X2 : carbopol 934P) were designed and optimized by the statistical method of central composite design (CCD). The transparency, pH, injectability, viscosity, gelation temperature, gelation time, elasticity modulus, degradation rate and in-vitro drug release studies of the batches were evaluated, and the percentage of drug release in the first hour, the time required for 90% drug release, gelation temperature, and gelation time were selected as dependent variables. RESULTS: These two independent factors significantly affected the four dependent variables (p < 0.05). The optimization result displayed that the optimized concentration of poloxamer 407 was 20.84% (w/v), and carbopol 934P was 0.5% (w/v). The optimized formulation showed a clear appearance (++), acceptable injectability (Pass), viscosity(151,798 mPa s), gelation temperature (36 °C), gelation time (213 s), preferable cell viability and cell proliferation, conformed to first-order release kinetics, and had a significant antibacterial effect. CONCLUSIONS The article demonstrates the great potential of the quercetin in-situ gel as an effective treatment for periodontitis.

Traumatic supraorbital fissure syndrome (TSOFS) is a symptom complex caused by nerve entrapment in the supraorbital fissure after skull base trauma. If the compressed cranial nerve in the supraorbital fissure is not decompressed surgically, ptosis, diplopia and eye movement disorder may exist for a long time and seriously affect the patients′ quality of life. Since its overall incidence is not high, it is not familiarized with the majority of neurosurgeons and some TSOFS may be complicated with skull base vascular injury. If the supraorbital fissure surgery is performed without treatment of vascular injury, it may cause massive hemorrhage, and disability and even life-threatening in severe cases. At present, there is no consensus or guideline on the diagnosis and treatment of TSOFS that can be referred to both domestically and internationally. To improve the understanding of TSOFS among clinical physicians and establish standardized diagnosis and treatment plans, the Skull Base Trauma Group of the Neurorepair Professional Committee of the Chinese Medical Doctor Association, Neurotrauma Group of the Neurosurgery Branch of the Chinese Medical Association, Neurotrauma Group of the Traumatology Branch of the Chinese Medical Association, and Editorial Committee of Chinese Journal of Trauma organized relevant experts to formulate Chinese expert consensus on the diagnosis and treatment of traumatic supraorbital fissure syndrome ( version 2024) based on evidence of evidence-based medicine and clinical experience of diagnosis and treatment. This consensus puts forward 12 recommendations on the diagnosis, classification, treatment, efficacy evaluation and follow-up of TSOFS, aiming to provide references for neurosurgeons from hospitals of all levels to standardize the diagnosis and treatment of TSOFS.

BACKGROUND: Periodontitis is a severe chronic inflammatory disease, whose traditional systemic antimicrobial therapy faces great limitations. In-situ gels provide an effective solution as an emerging local drug delivery system. METHODS: In this study, the novel thermosensitive poloxamer/carbopol in-situ gels loaded with 20 lmol/L quercetin for the treatment of periodontitis were prepared by cold method. Thirteen batches of in-situ gels based on two independent factors (X1 : poloxamer 407 and X2 : carbopol 934P) were designed and optimized by the statistical method of central composite design (CCD). The transparency, pH, injectability, viscosity, gelation temperature, gelation time, elasticity modulus, degradation rate and in-vitro drug release studies of the batches were evaluated, and the percentage of drug release in the first hour, the time required for 90% drug release, gelation temperature, and gelation time were selected as dependent variables. RESULTS: These two independent factors significantly affected the four dependent variables (p < 0.05). The optimization result displayed that the optimized concentration of poloxamer 407 was 20.84% (w/v), and carbopol 934P was 0.5% (w/v). The optimized formulation showed a clear appearance (++), acceptable injectability (Pass), viscosity(151,798 mPa s), gelation temperature (36 °C), gelation time (213 s), preferable cell viability and cell proliferation, conformed to first-order release kinetics, and had a significant antibacterial effect. CONCLUSIONS The article demonstrates the great potential of the quercetin in-situ gel as an effective treatment for periodontitis.

BACKGROUND: Classical guided bone regeneration (GBR) treatments can achieve favorable clinical results for ridge defects. However, extensive bone augmentation in the non-esthetic area in the posterior region for minor ridge defects is unnecessary. Therefore, this study used a collagen and Platelet-rich fibrin (PRF) mixture for bone augmentation on minor posterior ridge defects and evaluated the effects. METHODS: 22 Seibert Class I ridge defects were treated with BC and covered with a PRF membrane (simplified guided bone regeneration, simplified GBR) and other 22 were treated with Bio-Oss and covered with Bio-Gide (classical GBR). Cone-beam computed tomography imaging was conducted 6 months post-surgery to compare the ridge’s horizontal width (HW) and buccal ridge’s horizontal width to assess the osteogenic effect. In addition, the buccal ridge contour morphology was studied and classified. RESULTS: The buccal ridge contour of simplified GBR was Type A in 14 cases, Type B in 7 cases, and Type C in 1 case and it of classical GBR was Type A in 11 cases, Type B in 8 cases, and Type C in 3 cases. The mean HW significantly increased by 1.50 mm of simplified GBR treatment, while it increased by 1.83 mm in classical GBR treatment. CONCLUSION The combined use of BC and PRF had a significant effect on bone augmentation and this treatment exhibited promising clinical results for correcting posterior Seibert Class I ridge defects. The morphological classification of the reconstructive effect in this study can be utilized in future clinical work.

Abstract：Objective To improve the replication level of varicella⁃zoster virus（VZV）in human diploid cell line MRC⁃5 and increase the yield of VZV vaccine by reducing the expression of interferon（IFN）related genes via optimizing the cell line MRC⁃5. Methods Interferon receptor 1（IFNAR1）silenced MRC⁃5 cell line（MRC⁃5IFNAR1⁃）was constructed by CRISPR／Cas9 gene editing technology，which was determined for the relative expression of IFNAR1 mRNA，and for those of mRNA of IFN related genes IFNβ and OAS1 after VZV infection by qRT⁃PCR to evaluate the effect of gene silencing. Gene mutation sequences were further identified by sequencing of the silenced sites. The replication of VZV in MRC⁃5 and MRC⁃5IFNAR1⁃ cell lines was compared 168 h after VZV infection by using qRT⁃PCR and plaque formation unit（PFU）assay， to evaluate the effect of MRC⁃5IFNAR1⁃cell line on VZV replication. Results The growth status of MRC⁃5IFNAR1⁃ cell line wasconsistent with that of MRC ⁃ 5 cells，and the relative expression of IFNAR1 mRNA decreased by 73%；The relative expressions of IFNβ and OAS1 mRNA in MRC⁃5IFNAR1⁃ cell line were 61% and 90% lower than those in MRC⁃ 5 cells respectively after VZV infection；In addition，168 h after VZV infection，the level of DNA replication and the titer of VZV increased by 5. 7 folds and 4 folds respectively. Conclusion The successful establishment of MRC⁃5IFNAR1⁃ cell line may be a potential scheme to increase the yield of vaccines based on human diploid cells，and provided a reference for expanding production of VZV vaccine.

Objective: To development the prognostic nomogram for malignant pleural mesothelioma (MPM). Methods: Two hundred and ten patients pathologically confirmed as MPM were enrolled in this retrospective study from 2007 to 2020 in the People's Hospital of Chuxiong Yi Autonomous Prefecture, the First and Third Affiliated Hospital of Kunming Medical University, and divided into training (n=112) and test (n=98) sets according to the admission time. The observation factors included demography, symptoms, history, clinical score and stage, blood cell and biochemistry, tumor markers, pathology and treatment. The Cox proportional risk model was used to analyze the prognostic factors of 112 patients in the training set. According to the results of multivariate Cox regression analysis, the prognostic prediction nomogram was established. C-Index and calibration curve were used to evaluate the model's discrimination and consistency in raining and test sets, respectively. Patients were stratified according to the median risk score of nomogram in the training set. Log rank test was performed to compare the survival differences between the high and low risk groups in the two sets. Results: The median overall survival (OS) of 210 MPM patients was 384 days (IQR=472 days), and the 6-month, 1-year, 2-year, and 3-year survival rates were 75.7%, 52.6%, 19.7%, and 13.0%, respectively. Cox multivariate regression analysis showed that residence (HR=2.127, 95% CI: 1.154-3.920), serum albumin (HR=1.583, 95% CI: 1.017-2.464), clinical stage (stage Ⅳ: HR=3.073, 95% CI: 1.366-6.910) and the chemotherapy (HR=0.476, 95% CI: 0.292-0.777) were independent prognostic factors for MPM patients. The C-index of the nomogram established based on the results of Cox multivariate regression analysis in the training and test sets were 0.662 and 0.613, respectively. Calibration curves for both the training and test sets showed moderate consistency between the predicted and actual survival probabilities of MPM patients at 6 months, 1 year, and 2 years. The low-risk group had better outcomes than the high-risk group in both training (P=0.001) and test (P=0.003) sets. Conclusion: The survival prediction nomogram established based on routine clinical indicators of MPM patients provides a reliable tool for prognostic prediction and risk stratification.
Humans ; Mesothelioma, Malignant ; Prognosis ; Nomograms ; Retrospective Studies ; Proportional Hazards Models