This study was conducted to assess macro- and micronutrient compositions in school lunch menus based on the 'Dietary Guideline' for School Lunches. Ninety-five dieticians in elementary school in Chungbuk were asked to complete a questionnaire on characteristics of the school lunch program (such as type of foodservice, food production system), the information about dietitians (such as age, education, and job history), and the extent of the use of processed foods and frozen foods. They were asked to return the questionnaire with the menus including the name and the quantity of every food ingredient offered during a week. A total of 554 lunch menus provided for a week of June 2004 were analyzed. Average nutrient content per meal was as follows; 660 kcal, energy; 92.9 g, carbohydrate; 26.7 g, protein; 21.1 g, fat; 287 microgramRE, vitamin A; 0.5 mg, thiamin; 0.5 mg, riboflavin; 29.3 mg, vitamin C; 338.2 mg, calcium; 3.9 mg, iron; and 97 mg, cholesterol. Average percentages of energy from carbohydrate, protein and fat was 56.2%, 16.2%, and 29.0%, respectively. The mean nutrient content per meal was higher in rural-type than in urban-type schools. The weekly menu of 40% of the schools provided < 55% of energy from carbohydrate, and 39% of the schools offered lunch that provided > or =30% of energy from fat. The micronutrient content was generally high when the percent energy from fat was less than 25%. Our results showed that only 52.6% of the schools provided lunches with the energy composition as in the 'Dietary Guideline' of School Lunches. Whole Milk was the major contributor to fat, saturated fatty acid and cholesterol. We suggest that school foodservices start to provide low fat milk instead of whole milk to reduce fat, saturated fatty acid and cholesterol. If low fat milk is served instead of whole milk, percentage of energy from fat and saturated fat can be reduced from 29% to 25%, and from 10.2% to 9.1%, respectively, and cholesterol could be reduced from 97 mg to 79 mg. Efforts to meet 'Dietary Guideline' for School Lunches should be made, especially to reduce fat intake, while maintaining essential nutrient intake at sufficient levels for children.
Ascorbic Acid ; Calcium ; Child ; Cholesterol ; Chungcheongbuk-do ; Education ; Frozen Foods ; Humans ; Iron ; Lunch* ; Meals ; Micronutrients ; Milk ; Nutritionists ; Riboflavin ; Vitamin A

The purpose of this study was to investigate the displacement of and the stress distribution on the prosthesis, abutment, and its supporting tissues under functional load, and the effect of alteration in root length of 2nd abutment. The 3-dimensional finite element method was used and the finite element models were prepared in which the abutments of left mandibular 5 unit fixed partial denture were canine, the 1st premolar and the 2nd molar, and the root lengths of canines were as follows. Model I: Root length of canine was 2mm longer than the 1st premolar Model II: Root length of canine was 2mm shorter than the 1st premolar Static compressive force of 300N was applied to connector between 2nd premolar & 1st molar, and then von Mises stress, displacement and reaction force were obtained. The results were as follows : 1. In fixed partial denture, prosthesis under load on pontic was rotated around mesio-distal long axis of it from longual side to buccal, and simultaneously bended in buccal and gingival direction with mesial end deformed in gingival direction and distolingual end in occlusal 2. Clinical crowns of abutments were bended in the same directions with those in which prosthesis deforms. Due to that, roots of anterior abutments were twisted in counterclockwise with concentration of shear stress on distal or distobuccal sides of their cervices, and that of posterior was in clockwise with concentration of shear stress on mesiobuccal side of it in the same level with anterior abutments. 3. In case that root length of the 2nd abutment was longer than that of the 1st abutment, its displacement and reaction force which means the force tooth exerts on the surrounding periodontal tissues were smaller but shear stress on itself was larger than in the case root length of 2nd abutment was shorter.
Axis, Cervical Vertebra ; Bicuspid ; Crowns ; Denture, Partial, Fixed* ; Finite Element Analysis* ; Molar ; Prostheses and Implants ; Tooth

BACKGROUND: Target point mutation of DNA topoisomerase, which is the typical mode of quinolone resistance, cannot explain high level resistance to quinolones. Therefore, many authors looked into over expression of efflux pump as the possibility. After quantificating the arcA mRNA, which controls AcrAB- TolC, the authors tried to find out the difference in the expression of arcA mRNA according to MIC of ciprofloxacin. The authors also tried to determine the usefulness of real time PCR, which is more reproducible and takes less time than preexisting immunoblot assay, through quantification of acrA. MATERIAL AND METHODS: Mutations in topoisomerase (GyrA, ParC) of 20 quinolone resistant E. coli isolates were identified by PCR and direct DNA sequencing. AcrA level was measured by real time PCR. GAPDH of E.coli was used as endogenous control. The expression of acrA was confirmed through northern hybridization method, the results obtained by real time PCR were compared. RESULTS: 1) Topoisomerase mutations were found in all quinolone resistant E. coli strains. 2) AcrA expression in fluoroquinolone-resistant E. coli was quantified by using real time PCR. There was no relationship between the ratio of acrA expression to GAPDH and MIC of ciprofloxacin. 3) With Northern hybridization, we compared the band of acrA to that of GAPDH in compactness and area. No difference in the expression according to MIC could be found. 4) The results of AcrA/GAPDH were significantly correlated between the real-time PCR and northern blot (P<0.05, correlation coefficiency 0.98). CONCLUSION: In this study, no relationship between overexpression of AcrA gene and high level fluoroquinolone resistance. Therefore, we assume that mechanism other than AcrAB efflux pump is involved in and contribute to high-level fluoroquinolone resistance. However, the degree of efflux pump expression could be confirmed with real time PCR using acrA mRNA. Therefore, real time PCR could be used in the molecular biologic study on the mechanism of resistance to antibiotics.
Anti-Bacterial Agents ; Blotting, Northern ; Ciprofloxacin ; DNA Topoisomerases, Type I ; Escherichia* ; Fluoroquinolones* ; Point Mutation ; Polymerase Chain Reaction ; Quinolones ; Real-Time Polymerase Chain Reaction* ; RNA, Messenger ; Sequence Analysis, DNA

BACKGROUND: Target point mutation of DNA topoisomerase, which is the typical mode of quinolone resistance, cannot explain high level resistance to quinolones. Therefore, many authors looked into over expression of efflux pump as the possibility. After quantificating the arcA mRNA, which controls AcrAB- TolC, the authors tried to find out the difference in the expression of arcA mRNA according to MIC of ciprofloxacin. The authors also tried to determine the usefulness of real time PCR, which is more reproducible and takes less time than preexisting immunoblot assay, through quantification of acrA. MATERIAL AND METHODS: Mutations in topoisomerase (GyrA, ParC) of 20 quinolone resistant E. coli isolates were identified by PCR and direct DNA sequencing. AcrA level was measured by real time PCR. GAPDH of E.coli was used as endogenous control. The expression of acrA was confirmed through northern hybridization method, the results obtained by real time PCR were compared. RESULTS: 1) Topoisomerase mutations were found in all quinolone resistant E. coli strains. 2) AcrA expression in fluoroquinolone-resistant E. coli was quantified by using real time PCR. There was no relationship between the ratio of acrA expression to GAPDH and MIC of ciprofloxacin. 3) With Northern hybridization, we compared the band of acrA to that of GAPDH in compactness and area. No difference in the expression according to MIC could be found. 4) The results of AcrA/GAPDH were significantly correlated between the real-time PCR and northern blot (P<0.05, correlation coefficiency 0.98). CONCLUSION: In this study, no relationship between overexpression of AcrA gene and high level fluoroquinolone resistance. Therefore, we assume that mechanism other than AcrAB efflux pump is involved in and contribute to high-level fluoroquinolone resistance. However, the degree of efflux pump expression could be confirmed with real time PCR using acrA mRNA. Therefore, real time PCR could be used in the molecular biologic study on the mechanism of resistance to antibiotics.
Anti-Bacterial Agents ; Blotting, Northern ; Ciprofloxacin ; DNA Topoisomerases, Type I ; Escherichia* ; Fluoroquinolones* ; Point Mutation ; Polymerase Chain Reaction ; Quinolones ; Real-Time Polymerase Chain Reaction* ; RNA, Messenger ; Sequence Analysis, DNA

PURPOSE: To perform and compare differential diagnosis of patients with thyroid-associated myopathy, idiopathic orbital myositis and normal controls based on orbital computed tomography. Orbital fat and extraocular muscle densities were quantified using Hounsfield Unit (HU) and their characteristics were compared and analyzed. METHODS: From February 2005 to January 2013, orbital computed tomography was performed on 90 eyes of 47 thyroid-associated myopathy patients, 18 eyes of 14 idiopathic orbital myositis patients and 280 eyes of 140 normal subjects. The average values of orbital fat and extraocular muscle densities were measured and compared using HU. The density differences between the patients with thyroid-associated myopathy and the normal group were analyzed by age, clinical activity score, ocular protrusion and disease duration. RESULTS: In the thyroid-associated myopathy group, orbital fat and extraocular muscle densities were -87.8 +/- 12.5 HU and 48.7 +/- 7.1 HU, respectively. In the idiopathic orbital myositis group, the orbital fat and extraocular muscle densities were 79.9 +/- 9.9 HU and 49.2 +/- 9.1 HU, respectively. There was a statistically significant lower result of orbital fat in the thyroid-associated myopathy group (p = 0.002), however, the extraocular muscle density did not show a statistically significant difference (p = 0.775). The orbital fat and extraocular muscle densities of the normal group were -79.0 +/- 11.2 HU and 54.3 +/- 6.3 HU, respectively. There were significantly lower results in both orbital fat and extraocular muscle densities in the thyroid-associated myopathy group than normal group (p = 0.000). In active cases and those accompanied by ocular protrusion, there was no significant difference in orbital fat density (p = 0.345 and p = 0.952, respectively), while extraocular muscle density significantly decreased (p = 0.007 and p = 0.003, respectively). CONCLUSIONS: A difference between the orbital fat and extraocular muscle densities in thyroid-associated myopathy and idiopathic orbital myositis could be quantitatively found using HU and orbital computed tomography.
Diagnosis, Differential ; Humans ; Muscles* ; Muscular Diseases* ; Orbit* ; Orbital Myositis*

BACKGROUND: Intravenous catheter-related complication among the hospitalized patients has been increasing recently in Korea, since many hospitals has tried to save expenses by replacing the foreign-made catheter with domestic-made intravenous catheter. We studied the incidence rate of catheter-related complication and compared the incidence of catheter-related complication between domestic-made and foreign-made ones. We also studied to elucidate whether the morphologic characteristics of the intravenous catheter will effect the incidence of catheter-related complication. METHOD: From July 1 to Sept 30, 1998, we surveyed the incidence rate of intravenous catheter-related complication among the hospitalized patients in the wards of Medicine. Surgery, Obstetric, and Neonatal Intensive Care Unit in Guro Hospital, Korea University Medical center. We also compared the incidence of complication between domestic-made catheter (catheter A) and foreign-made catheter (catheter B) of three different gages (24G, 22G and 18G). The morphologic characteristics of intravenous catheters has been studied by electron microscopy. RESULT: Complication associated with use of intravenous catheter had been occurred 263 out of 459 cases (57.3%), among those cases, non-infectious complication and infectious complication were 173 cases (37.7%) and 90 cases (19.6%), respectively. Totally, catheter A group showed higher complication than catheter B group [62.0% (160/258) vs 51.2% (103/201), P=.021]. Analysis on the incidence rate of complication according to the products did not show significant differences in the noninfectious complication in every gage groups. However the infectious complication occurred higher in the domestic-made catheter A group than among the foreign-made catheter B group [(24G: 6% vs 0%, P=.026), (22G: 25.6% vs 9.6%, P=.001), (18G: 36.8% vs 13.4%, P=.002)]. Duration of catheter life did not show the difference between catheter A group and catheter B group [48.5hrs vs 50.3hrs, P=.474]. The analysis on risk factors for complication showed that catheter A group is highly related (odd ratio 1.85). The morphologic analysis of the catheter by using electron microscopy showed that the angles in the tip of the introducing needle of catheter Aand catheter Bare 60degrees and 45degrees , respectively, and the bevel between introducing needle and catheter sheath are 50degrees and 27degrees, respectively. CONCLUSION: There was a higher incidence rate of complication related to domestic-made catheter usage, which might influence increasing the period of the hospitalization and the expenses due to the complication. The study of cost effectiveness analysis needs to be performed regarding intravenous catheter-related complication. Morphologically, catheter A showed more blunt angle in the tip and transition area of the introducing needle than the angle of catheter B, which is considered to influence the higher complication incidence. It needs to improve the quality of domestic-made intravenous catheter.
Academic Medical Centers ; Catheter-Related Infections ; Catheters ; Cost-Benefit Analysis ; Female ; Hospitalization ; Humans ; Incidence* ; Infant, Newborn ; Intensive Care, Neonatal ; Korea ; Microscopy, Electron ; Needles ; Obstetric Surgical Procedures ; Prospective Studies* ; Risk Factors

No abstract available.
Stomach Neoplasms* ; Stomach* ; Water*

With the recent development of digital dentistry, fully digitalized methods for fabricating dentures, using intraoral scans and computer-aided design/computer-aided manufacturing (CAD-CAM), are getting popular. Digital methods have the advantage of simplifying the fabrication process in the clinic and laboratory, supplementing digital data. This case report shows a fully digital fabrication method for interim removable dentures in a patient with anterior tooth loss in which implant placement is impossible or delayed. Interim removable dentures were fabricated using two methods. One method is printing tooth and base parts separately and combining, and the other method is printing the whole denture at one time and coloring on the base part. Afterward, dentures were delivered and adaptation was evaluated using the triple scan technique. The extracted site was scanned intraorally (first scan) and the interim removable denture was digitally scanned both intraorally (second scan) and, after removal extraorally (Third scan). In both method, denture adaptation was shown favorable. We report this case report as both the patient and the operator were satisfied with a simplified process using a fully digital method in the clinic.

No abstract available.
Animals ; Brain* ; Cats*

Abutment teeth supporting removable partial denture could be faced a number of problems including development of dental caries. If the existing removable partial denture is in clinically acceptable state and the patient does not want to replace the existing removable partial denture, then a new prosthesis for abutment teeth need to be made. The procedure of fabricating a new prosthesis of abutment teeth for existing removable partial denture is complicate and technically challenging. To fabricate the abutment crown, the original cast of patient obtained before any complication to the abutment teeth is required. The original cast should also contain teeth other than the abutment teeth as a reference point. Once the cast is prepared, CAD/CAM could be used to produce retrofitting prosthesis effortlessly and efficiently. This clinical report presents fabricating a crown to fit existing removable partial denture using CAD/CAM for a patient with post and core failure and dislodged prosthesis. The prosthesis had high stability with minimum adjustment yielding satisfying result.
Crowns ; Dental Caries ; Denture, Partial, Removable ; Humans ; Prostheses and Implants ; Tooth