Amyloidosis results from the deposition of insoluble, fibrous amyloid proteins, nearly always in the extracellular spaces of organs and tissues. There are several varieties of amyloidosis, each of which is identified by the immunochemical nature of amyloid protein fibrils. Amyloid goiter is a very rare clinical entity and can be confused with a neoplasm. We have experienced a case of amyloid goiter with hypothyroidism secondary to tuberculosis. A 20 years old women with 5 months history of pulmonary tuberculosis was admitted with complaints of diarrhea, abdominal pain, weight loss at one year ago. She had a non-tender, diffuse and firm goiter. Also she had normal thyroid function at the first admission but was found to be hypothyroid at the second admission, 10 months later. Histologic examination revealed amyloid deposition in thyroid gland, stomach, colon and rectum.
Abdominal Pain ; Amyloid* ; Amyloidogenic Proteins ; Amyloidosis ; Colon ; Diarrhea ; Extracellular Space ; Female ; Goiter* ; Humans ; Hypothyroidism* ; Plaque, Amyloid ; Rectum ; Stomach ; Thyroid Gland ; Tuberculosis ; Tuberculosis, Pulmonary ; Weight Loss ; Young Adult

No abstract available.
Homocystine ; Homocystinuria*

Leg length discrepancy in the growing children was developed by multiple causes; such as congenital, infection, traumatic, and mechanical facotrs etc. The discrepancy have been treated by several methods including bony lengthening which is preferable method, but epiphysiodesis also has been one of the valuable methods in which was applied to the treatment of mild to moderate leg length discrepancy in the growing children. We report on patients(15 cases) with leg length discrepancy treated by percutaneous epiphysiodesis since July 1986. There were 8 males and 7 females and the average age of them was 12.6 years old. And we also performed an experimental study which was to find out the effectiveness of the pereutaneous physeal destruction comparing the techningues between curette and drill in the bony models. The causes of leg length discrepancy were trauma in 8 cases and osteomyelitis in 2 cases, congenital dislocation of the hip in 2 cases, poliomyelitis, Legg-Galve-Perthes disease, congenital hemihypertropy in each 1 case. The average preoperative leg length discrepancy was 2.6cm(range:1.9-3.7cm), and average anticipated discrepancy without operation have been 3.7cm(range:2.2-6.3cm) at maturity. The final discrepancy was 0.9cm after 43 months follow-up. According to the result by experimental study, percutaneous epiphysiodesis with curette technique would be more effective and safe than drill thchnique. Percutaneous epiphysiodesis might be one of the useful methods for the treatment of mild to moderate degree of leg length discrepancy in the growing children, and also could be applied combining with bony lengthening for treatment of severe degree of leg length discrepancy.
Child ; Dislocations ; Female ; Follow-Up Studies ; Hip ; Humans ; Leg ; Male ; Methods ; Osteomyelitis ; Poliomyelitis

This study investigated that the effect of rewetting agent on dentinal microtensile bond strength (microTBS). Human molars were sectioned to expose the superficial dentin surfaces. Samples were divided into two groups according to type of adhesives-Single Bond (S) and One-Step (O)], and again subdivided into five groups by different dentin surface treatment-dry for 15s (D), blot dry (BD) or dry for 15s, and rewet with different rewetting agents [distilled water (DW), Gluma Desensitizer (GD) and Aqua-Prep (AP)] for 30s. After application of adhesive, composite resin was built up on the bonding surface. Each tooth was sectioned to obtain stick with 1 mm2 cross sectional area and the microTBS was determined by EZ test. In the S group, the mean microTBS of GD, AP and BD group was significantly higher than that of DW and D group (p < 0.05). In the O group, the mean microTBS of AP, GD, BD and DW group was significantly higher than that of D group (p < 0.05). The data suggested that Gluma Desensitizer and Aqua-Prep could be successfully used as rewetting agents, and Distilled water could be acceptable in aceton based adhesive system only.
Adhesives ; Dentin* ; Humans ; Molar ; Tooth ; Water

The purpose of this study was to evaluate the effect of immediate or delayed composite resin filling on dentinal microtensile bond strength (microTBS) after applied the adhesive. The coronal dentin of human third molars was exposed. Single-Bond or One-Step was applied on the dentin surfaces, and composite resin were constructed immediately (group 1) or 5 min., 10 min., 15 min., 20 min. and 30 min. (groups 2-6) after an adhesive was applied. The specimens were sectioned and made bar-shaped. Each surface area of them was about 1mm2. The microTBS test was performed by EZ test. The results were analysed by One-way ANOVA and Tukey's test at 95% significance level. The results suggested that the microTBS of Single-Bond to dentin was decreased when the composite resin was constructed 20 min. and 30 min. after Single-Bond was applied. But the microTBS of One-Step was not affected by delayed composite resin filling.
Adhesives ; Dentin ; Humans ; Molar, Third

No abstract available.
Glomerular Basement Membrane*

This study evaluated the microleakage and interfacial gap between enamel and composite resin under the dry and wet condition of the enamel surface. V shaped class 5 cavities were prepared on the occlusal portion of extracted human molars. Samples were divided into three groups: D group (air dry for 10-15 s), BD group (blot dry with moist cotton pellet), and DR group (air dry for 10-15 s and rewet with Aqua-Prep F for 20 s). Cavities were filled using Aelitefil composite resin after applied One-Step. Microleakage was tested by 2% methylene blue dye solution and the data were statistically analysed by Kruskal-Wallis test and Mann-Whitney test. Also Enamel-resin interface was observed under SEM. Group BD showed statistically lower microleakage than group D (p < 0.05), but there was no statistically significant difference between group BD and DR (p > 0.05). At the enamel-resin interface, group D showed the gap of 2 microm thickness, but group BD and DR showed close adaptation. In conclusion, the use of blot dry and rewetting agent (Aqua-Prep F) resulted in decreased microleakage and improved adhesion between enamel and resin when using One-Step.
Dental Enamel* ; Humans ; Methylene Blue ; Molar

This study evaluated the marginal microleakage of five single step adhesives. Class V cavity preparations with occlusal margins in enamel and gingival margins in dentin were prepared on both buccal and lingual surfaces of extracted human molar teeth. Prepared teeth were randomly divided into five groups and restored using one of the single step adhesives and composite resins: Prompt L-Pop/Filtek Z-250 (Group 1), AQ Bond/Metafil CX (Group 2), One-Up Bond F/Palfique Toughwell (Group 3), Futurabond/Admira (Group 4), Xeno III/Spectrum TPH (Group 5). The restored teeth were thermocycled. Microleakage was assessed by dye penetration using 2% methylene blue dye solution. The teeth were bisected buccolingually and evaluated for microleakage under steromicroscope. The data were statistically analysed by Kruskal-Wallis test and Mann-Whitney tests. The results of this study were as follows; 1. Microleakage of enamel margins in group 3 was statistically higher than that in groups 1, 2, 4, 5 (p < 0.05). 2. Microleakage of dentin margins in group 1 was statistically higher than that in groups 2, 5, and that in group 3 was statistically higher than that in groups 2, 4, 5 (p < 0.05). 3. Dentin marginal microleakage was higher than enamel marginal microleakage in all experimental groups. In conclusion, Prompt L-Pop showed the least leakage at enamel margin, and AQ Bond showed at dentin margin in this study. Marginal miroleakage in dentin was higher than that in enamel.
Adhesives* ; Composite Resins ; Dental Enamel ; Dentin ; Humans ; Methylene Blue ; Molar ; Tooth

This study evaluated the influence of application time of self-etching primers on microtensile bond strength (microTBS) to dentin using three self-etching primer adhesive systems. Dentin surfaces were exposed from forty-eight human molars. They were conditioned with three self-etching primers (Clearfil SE Bond [SE], Unifil Bond [UF], Tyrian SPE + One Step Plus [TY]) and different primining times (10s, 20s, 30s and 40s). Composite resins were bonded to dentin surfaces and specimens were made. microTBS was tested and statistically compared using by one-way ANOVA and Tukey's Test The results of this study presented that priming time for 10s in SE and UF groups and for 30s and 40s in TY group was highly decreased microTBS to dentin.
Adhesives ; Composite Resins ; Dentin* ; Humans ; Molar

After laparoscopic surgery, most cases of incisional hernia occur when a trocar greater than 10 mm is used and this rarely occurs when a 5 mm trocar is used. We recently experienced two cases of incisional herniation at a 5 mm port site in connection with withdrawal of the drain after laparoscopic procedure.
Hernia ; Laparoscopy ; Surgical Instruments