BACKGROUND:Cervical disc herniation can cause pain in the neck and shoulder area,as well as radiating pain in the upper limbs.The incidence rate is increasing year by year and tends to affect younger individuals.Fully understanding the biomechanical characteristics of the cervical spine in adolescents is of great significance for preventing and delaying the onset of cervical disc herniation in this age group. OBJECTIVE:To reconstruct cervical spine models for both healthy adolescents and adolescent patients with cervical disc herniation utilizing finite element analysis techniques,to analyze the motion range of the C1-T1 cervical vertebrae as well as the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and the cartilage of the small joints. METHODS:A normal adolescent's cervical spine and an adolescent patient with cervical disc herniation were selected in this study.The continuous scan cervical spine CT raw image data were imported into Mimics 21.0 in DICOM format.The C1-T1 vertebrae were reconstructed separately.Subsequently,the established models were imported into the 3-Matic software for disc reconstruction.The perfected models were then imported into Hypermesh software for meshing of the vertebrae,nucleus pulposus,annulus fibrosus,and ligaments,creating valid geometric models.After assigning material properties,the final models were imported into ABAQUS software to observe the joint motion range of the C1-C7 cervical vertebrae segments under different conditions,and to analyze the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and small joint cartilage of each cervical spine segment. RESULTS AND CONCLUSION:(1)In six different conditions,the joint motion range of the C1 vertebra in the cervical spine models of both normal adolescent and adolescent patient with cervical disc herniation was higher than that of the other vertebrae.Additionally,the joint motion range of each cervical spine segment in normal adolescent was greater than that in adolescent patient with cervical disc herniation.(2)In the cervical spine model of normal adolescent,the maximum stress values in the annulus fibrosus and nucleus pulposus were found on the left side during C2-3 flexion conditions(0.43 MPa and 0.17 MPa,respectively).In the cervical spine model of adolescent patient with cervical disc herniation,the maximum stress values were found on the left side during C7-T1 flexion conditions(0.54 MPa and 0.18 MPa,respectively).(3)In the cervical spine model of normal adolescent,the maximum stress value on the endplate was found on the left side of the upper endplate of C3 during flexion conditions(1.46 MPa).In the model of adolescent patient with cervical disc herniation,the maximum stress value on the endplate was found on the left side of the lower endplate of C7 during flexion conditions(1.32 MPa).(4)In the cervical spine model of normal adolescent,the maximum stress value in the small joint cartilage was found in the C2-3 left rotation conditions(0.98 MPa).In adolescent patient with cervical disc herniation,the stress in the small joint cartilage significantly increased under different conditions,especially in C1-2,with the maximum stress found during left flexion(3.50 MPa).(5)It is concluded that compared to normal adolescent,adolescent patient with cervical disc herniation exhibits altered cervical curvature and a decrease in overall joint motion range in the cervical spine.In adolescent with cervical disc herniation,there is a significant increase in stress on the annulus fibrosus,nucleus pulposus,and endplates in the C7-T1 segment.The stress on the left articular cartilage of the C1-2 is notable.Abnormal cervical curvature may be the primary factor causing these stress changes.

OBJECTIVE: To observe the clinical efficacy of Qihuang needle therapy for autism spectrum disorder (ASD) children with sleep disorder. METHODS: A total of 60 ASD children with sleep disorder were randomly divided into an observation group and a control group, 30 cases in each group. Both groups were treated with structured education intervention, 60 min each time, once a day, 6 times a week. Qihuang needle therapy was applied at Yintang (GV24⁺), Baihui (GV20) and bilateral Jueyinshu (BL14), Xinshu (BL15) in the observation group, multi-direction needling was delivered and without needle retaining. The treatment was given 2 times a week, each treatment was delivered at interval of 2 days at least. Behavioral intervention was adopted in the control group. Treatment for consecutive 12 weeks was required in both groups. Before and after treatment, the scores of children's sleep habits questionnaire (CSHQ), the autism behavior checklist (ABC), the childhood autism rating scale (CARS), and the childhood autism behavior scale (CABS) were observed in the two groups. RESULTS: After treatment, the scores of CSHQ, ABC, CARS and CABS were decreased compared with those before treatment (P<0.01), and the above scores in the observation group were lower than those in the control group (P<0.05). CONCLUSION Qihuang needle therapy can effectively treat ASD with sleep disorder, improve the core symptoms of ASD and the sleep quality.
Humans ; Autism Spectrum Disorder/physiopathology* ; Male ; Female ; Child ; Sleep Wake Disorders/physiopathology* ; Child, Preschool ; Acupuncture Therapy ; Acupuncture Points ; Treatment Outcome ; Sleep ; Needles

3D printing technology, with a layer-by-layer construction method, enables the fabrication of intricately shaped and customizable bolus. In contrast to traditional preparation methods, 3D printing technology addresses challenges such as poor bolus fit and cumbersome production processes, offering a novel approach to efficient and personalized bolus fabrication. This article discusses the research progress of 3D printing technology in radiotherapy bolus from aspects such as the preparation process, clinical application, and research advancements, combined with the actual printing experience of Department of Radiation Oncology in Chongqing University Cancer Hospital.
Printing, Three-Dimensional ; Humans ; Radiotherapy/methods*

(+)-Borneol, the main component of "Natural Borneol" in the Chinese Pharmacopoeia, is a high-end spice and precious medicine. Plant extraction cannot meet the increasing demand for (+)-borneol, while microbial biosynthesis offers a sustainable supply route. However, its production was extremely low compared with other monoterpenes, even with extensively optimizing the mevalonate pathway. We found that the key challenge is the complex and unusual dephosphorylation reaction of bornyl diphosphate (BPP), which suffers the side-reaction and the competition from the cellular dephosphorylation process, especially lipid metabolism, thus limiting (+)-borneol synthesis. Here, we systematically optimized the dephosphorylation process by identifying, characterizing phosphatases, and balancing cellular dephosphorylation metabolism. For the first time, we identified two endogenous phosphatases and seven heterologous phosphatases, which significantly increased (+)-borneol production by up to 152%. By engineering BPP dephosphorylation and optimizing the MVA pathway, the production of (+)-borneol was increased by 33.8-fold, which enabled the production of 753 mg/L under fed-batch fermentation in shake flasks, so far the highest reported in the literature. This study showed that rewiring dephosphorylation metabolism was essential for high-level production of (+)-borneol in Saccharomyces cerevisiae, and balancing cellular dephosphorylation is also helpful for efficient biosynthesis of other terpenoids since all whose biosynthesis involves the dephosphorylation procedure.

Enamel demineralization, the formation of white spot lesions, is a common issue in clinical orthodontic treatment. The appearance of white spot lesions not only affects the texture and health of dental hard tissues but also impacts the health and aesthetics of teeth after orthodontic treatment. The prevention, diagnosis, and treatment of white spot lesions that occur throughout the orthodontic treatment process involve multiple dental specialties. This expert consensus will focus on providing guiding opinions on the management and prevention of white spot lesions during orthodontic treatment, advocating for proactive prevention, early detection, timely treatment, scientific follow-up, and multidisciplinary management of white spot lesions throughout the orthodontic process, thereby maintaining the dental health of patients during orthodontic treatment.
Humans ; Consensus ; Dental Caries/etiology* ; Dental Enamel/pathology* ; Tooth Demineralization/etiology* ; Tooth Remineralization

Pulmonary fibrosis(PF)is a chronic progressive end-stage lung disease.However,the mechanisms un-derlying the progression of this disease remain elusive.Presently,clinically employed drugs are scarce for the treatment of PF.Hence,there is an urgent need for developing novel drugs to address such diseases.Our study found for the first time that a natural source of Prismatomeris connata Y.Z.Ruan(Huang Gen,HG)ethyl acetate extract(HG-2)had a significant anti-PF effect by inhibiting the expression of the transforming growth factor beta 1/suppressor of mothers against decapentaplegic(TGF-β1/Smad)pathway.Network pharmacological analysis suggested that HG-2 had effects on tyrosine kinase phosphorylation,cellular response to reactive oxygen species,and extracellular matrix(ECM)disassembly.Moreover,mass spec-trometry imaging(MSI)was used to visualize the heterogeneous distribution of endogenous metabolites in lung tissue and reveal the anti-PF metabolic mechanism of HG-2,which was related to arginine biosyn-thesis and alanine,asparate and glutamate metabolism,the downregulation of arachidonic acid meta-bolism,and the upregulation of glycerophospholipid metabolism.In conclusion,we elaborated on the relationship between metabolite distribution and the progression of PF,constructed the regulatory metabolic network of HG-2,and discovered the multi-target therapeutic effect of HG-2,which might be conducive to the development of new drugs for PF.

Objective To investigate the clinical application of 3D printed bolus with specific density in breast cancer radiotherapy,and to evaluate its effects on dose distribution and positioning.Methods Forty post-mastectomy patients undergoing intensity-modulated radiotherapy were randomly enrolled for 3D printed bolus(n=20)and conventional bolus(n=20),and all patients were fixed in the supine position using styrofoam.Conventional positioning was performed based on in-room lasers and body markers,with daily Catalyst HD optical surface monitoring combined with weekly CBCT verification.The absolute dose,patients'skin surface dose,surgical incision,planned field,target area doses(VCTV50Gy,VPTV50Gy)and organs-at-risk doses in patients with different boluses were recorded,and the conformity index and homogeneity index were calculated,and the setup errors using CBCT and Catalyst HD were also analyzed.Results The difference in absolute dose between different boluses was trivial,but the skin surface dose with 3D printed bolus was significantly higher than with conventional bolus[(54.83±0.44)Gyvs(54.43±0.51)Gy,P<0.05].Patients with 3D printed boluses had a higher conformity index than with conventional boluses(0.69±0.04 vs 0.65±0.02).For different boluses,there was no significant difference in VCTV50 Gy,while the VPTV50 Gy and organs-at-risk doses were lower in those with 3D printed bolus than conventional boluses(P<0.05),with heart Vmean of 9.68%±3.24%vs11.43%±3.60%.In patients with 3D printed boluses,both planned field arrangement and surgical incision affected the target doses,and the doses of the target area without an internal breast wrap was greater than those with internal breast wrap(P<0.05).When the field was not wrapped around the internal breast,the surgical incisions only affected VPTV50 Gy,and the VPTV50 Gy was greater with the transverse fusiform incision than with the oblique vertical incision(P<0.05),which were 95.58%±0.51%vs95.44%±0.71%.The optical monitoring accuracies with different boluses differed only in the left-right direction(P<0.05),with(0.08±0.57)cm and(-0.15±0.46)cm for 3D printed and conventional boluses.Conclusion Compared with conventional bolus,3D printed bolus can improve dose distribution and optical monitoring accuracy.The surgical incision and planned field arrangement under 3D-printed bolus would exert effects on target doses.

Patients with severe trauma require an extremely timely treatment and transfusion plays an irreplaceable role in the emergency treatment of such patients. An increasing number of evidence-based medicinal evidences and clinical practices suggest that patients with severe traumatic bleeding benefit from early transfusion of low-titer group O whole blood or hemostatic resuscitation with red blood cells, plasma and platelet of a balanced ratio. However, the current domestic mode of blood supply cannot fully meet the requirements of timely and effective blood transfusion for emergency treatment of patients with severe trauma in clinical practice. In order to solve the key problems in blood supply and blood transfusion strategies for emergency treatment of severe trauma, Branch of Clinical Transfusion Medicine of Chinese Medical Association, Group for Trauma Emergency Care and Multiple Injuries of Trauma Branch of Chinese Medical Association, Young Scholar Group of Disaster Medicine Branch of Chinese Medical Association organized domestic experts of blood transfusion medicine and trauma treatment to jointly formulate Chinese expert consensus on blood support mode and blood transfusion strategies for emergency treatment of severe trauma patients ( version 2024). Based on the evidence-based medical evidence and Delphi method of expert consultation and voting, 10 recommendations were put forward from two aspects of blood support mode and transfusion strategies, aiming to provide a reference for transfusion resuscitation in the emergency treatment of severe trauma and further improve the success rate of treatment of patients with severe trauma.

To summarize the nursing experience of an elderly postoperative laryngeal cancer patient who developed a Type Ⅳ hiatal hernia.Key nursing care points included the monitoring of shock index and MEWS to promptly activate the rapid response team and implement the Surviving Sepsis Campaign,active fluid resuscitation and continuous monitoring of central venous pressure to prevent cardiopulmonary failure,implementing a personalized postoperative respiratory rehabilitation plan to promote lung re-expansion and prevent pulmonary infection,monitoring and controlling intra-abdominal hypertension,and implementing an intra-abdominal pressure-guided enteral nutrition management plan,employing a restrictive fluid management strategy to reduce tissue edema and maintain fluid and electrolyte balance,implementing an integrated"hospital-community-home"health management plan to improve the patient's quality of life.The patient was hospitalized for 23 days and discharged smoothly,with good recovery after a 3-month follow-up.

Background::Ainuovirine (ANV) is a new generation of non-nucleoside reverse transcriptase inhibitor for the treatment of human immunodeficiency virus (HIV) type 1 infection. This study aimed to evaluate the population pharmacokinetic (PopPK) profile and exposure-response relationship of ANV among people living with HIV.Methods::Plasma concentration-time data from phase 1 and phase 3 clinical trials of ANV were pooled for developing the PopPK model. Exposure estimates obtained from the final model were used in exposure-response analysis for virologic responses and safety responses.Results::ANV exhibited a nonlinear pharmacokinetic profile, which was best described by a two-compartment model with first-order elimination. There were no significant covariates correlated to the pharmacokinetic parameters of ANV. The PopPK parameter estimate (relative standard error [%]) for clearance adjusted for bioavailability (CL/F) was 6.46 (15.00) L/h, and the clearance of ANV increased after multiple doses. The exposure-response model revealed no significant correlation between the virologic response (HIV-RNA <50 copies/mL) at 48 weeks and the exposure, but the incidence of adverse events increased with the increasing exposure ( P value of steady-state trough concentration and area under the steady-state curve were 0.0177 and 0.0141, respectively). Conclusions::Our PopPK model supported ANV 150 mg once daily as the recommended dose for people living with HIV, requiring no dose adjustment for the studied factors. Optimization of ANV dose may be warranted in clinical practice due to an increasing trend in adverse reactions with increasing exposure.Trial registration::Chinese Clinical Trial Registry https://www.chictr.org.cn (Nos. ChiCTR1800018022 and ChiCTR1800019041).