Objective:To study the pharmacokinetics and relative bioavailability of isosorbide 5 mononitrate(5 ISMN)sustained release capsules in 12 male healthy volunteers. Methods: A capillary gas chromatography method with electron captured detector was established for the determination of 5 ISMN in plasma, after administrating a daily dose of 40 mg 5 ISMN domestic and imported sustained release capsules in a randomized crossover design.The fluctuation of 5 ISMN valley concentrations observed and the steady state pharmacokinetics was characterized in a multiple dose schedule of 40 mg 5 ISMN sustained release capsules.Results:The steady state of 5 ISMN plasma concentrations reached at the fourth oral administration.The steady state pharmacokinetic parameters after multiple oral dose of 40 mg 5 ISMN domestic and imported sustained release capsules were as follows: t max were (4.8?0.6) and (4.8?0.9) h, c max were (802.46?94.45) and (807.09?109.16) ?g/L, c min were (127.83?23.76) and (121.85?22.00) ?g/L, AUC ss were (8 114.7?1 393.4) and (8 174.8?1 219.7) ?g?h/L, c av were (338.12?58.06) and (340.62?50.82) ?g/L,the degree of fluctuation (DF) were (2.04?0.39) and (2.03?0.33), respectively. Conclusion:The relative bioavailability of multiple oral dose of 40 mg domestic 5 ISMN sustained release capsules is (99.07?5.45)%, there are no significant differences in the main steady state pharmacokinetic parameters between domestic and imported sustained release capsules, and so the 2 capsules are bioequivalent.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.