ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

Objective To analyze the clinical characteristics and high risk factors of prognosis in patients with chronic heart failure and renal insufficiency. Methods A total of 499 patients with chronic heart failure and renal insufficiency from September 2022 to September 2024 were selected. The clinical data of patients were collected, and the clinical characteristics were analyzed. After 3 months of follow-up, the patients were divided into survival group and death group according to the prognosis status. Univariate analysis, and multivariate logistic regression analysis were adopted to analyze the risk factors affecting the prognosis of patients. Results According to different ejection fraction values, patients were classified into HFrEF group (n=164), HFmrEF group (n=103) and HFpEF group (n=232). The age in HFpEF group was the lowest (P<0.05). The cardiac function grading was the highest in HFrEF group, and the systolic blood pressure was lower while the diastolic blood pressure was higher than that in the other two groups (P<0.05), and there were no differences in cardiac function, systolic blood pressure and diastolic blood pressure between HFmrEF group and HFpEF group (P>0.05). The levels of Hb and ALB in HFpEF group were higher than those in HFrEF group (P<0.05), and no differences were observed between HFmrEF group and the other two groups (P>0.05). HFrEF group had the lowest total cholesterol and Scr, and the highest serum uric acid, eGFR, BNP and cTnI (P<0.05). The level of hs-CRP in HFmrEF group was the lowest. The LVEDD was lower in HFpEF group than that in the other two groups (P<0.05). The levels of serum uric acid, Scr and hs-CRP in death group were higher while the eGFR was lower compared to survival group (P<0.05). After logistic analysis, it was found that elevated levels of serum uric acid and hs-CRP and decreased eGFR were risk factors for poor prognosis (P<0.05). Conclusion Patients with chronic heart failure and renal insufficiency are mainly HFpEF. Elevated serum uric acid and hs-CRP and decreased eGFR are the high risk factors for poor prognosis.

Inflammatory bowel disease (IBD) is a chronic inflammatory disorder of the gastrointestinal tract, which increases the incidence of colorectal cancer (CRC). In the pathophysiology of IBD, ubiquitination/deubiquitination plays a critical regulatory function. Josephin domain containing 2 (JOSD2), a deubiquitinating enzyme, controls cell proliferation and carcinogenesis. However, its role in IBD remains unknown. Colitis mice model developed by dextran sodium sulfate (DSS) or colon tissues from individuals with ulcerative colitis and Crohn's disease showed a significant upregulation of JOSD2 expression in the macrophages. JOSD2 deficiency exacerbated the phenotypes of DSS-induced colitis by enhancing colon inflammation. DSS-challenged mice with myeloid-specific JOSD2 deletion developed severe colitis after bone marrow transplantation. Mechanistically, JOSD2 binds to the C-terminal of inosine-5'-monophosphate dehydrogenase 2 (IMPDH2) and preferentially cleaves K63-linked polyubiquitin chains at the K134 site, suppressing IMPDH2 activity and preventing activation of nuclear factor kappa B (NF-κB) and inflammation in macrophages. It was also shown that JOSD2 knockout significantly exacerbated increased azoxymethane (AOM)/DSS-induced CRC, and AAV6-mediated JOSD2 overexpression in macrophages prevented the development of colitis in mice. These outcomes reveal a novel role for JOSD2 in colitis through deubiquitinating IMPDH2, suggesting that targeting JOSD2 is a potential strategy for treating IBD.

Pelvic organ prolapse (POP), whose etiology is influenced by genetic and clinical risk factors, considerably impacts women's quality of life. However, the genetic underpinnings in non-European populations and comprehensive risk models integrating genetic and clinical factors remain underexplored. This study constructed the first polygenic risk score (PRS) for POP in the Chinese population by utilizing 20 disease-associated variants from the largest existing genome-wide association study. We analyzed a discovery cohort of 576 cases and 623 controls and a validation cohort of 264 cases and 200 controls. Results showed that the case group exhibited a significantly higher PRS than the control group. Moreover, the odds ratio of the top 10% risk group was 2.6 times higher than that of the bottom 10%. A high PRS was significantly correlated with POP occurrence in women older than 50 years old and in those with one or no childbirths. As far as we know, the integrated prediction model, which combined PRS and clinical risk factors, demonstrated better predictive accuracy than other existing PRS models. This combined risk assessment model serves as a robust tool for POP risk prediction and stratification, thereby offering insights into individualized preventive measures and treatment strategies in future clinical practice.
Humans ; Female ; Pelvic Organ Prolapse/epidemiology* ; Middle Aged ; Risk Assessment/methods* ; China/epidemiology* ; Multifactorial Inheritance ; Aged ; Risk Factors ; Genome-Wide Association Study ; Genetic Predisposition to Disease ; Case-Control Studies ; Adult ; Polymorphism, Single Nucleotide ; Genetic Risk Score ; East Asian People

Objective:The effect and safety of etoposide combined with G-CSF were compared with those of cyclophosphamide combined with G-CSF in autologous peripheral blood mobilization in patients with multiple myeloma (MM) .Methods:Patients with MM who received autologous peripheral blood stem cell mobilization and collection in the Department of Hematology, Beijing Chaoyang Hospital Affiliated to Capital Medical University from January 1, 2020 to July 31, 2023 were included. A total of 134 patients were screened by propensity score matching technology according to a 1∶1 ratio. A total of 67 cases were each treated with ETO combined with G-CSF mobilization scheme (ETO group) and CTX combined with G-CSF mobilization scheme (CTX group). Their clinical data were retrospectively analyzed.Results:①Collection results: the ETO and CTX groups [2 (1-3) d vs 2 (1-5) d; P<0.001] and CD34 + cells [7.62×10 6 (2.26×10 6-37.20×10 6) /kg vs 2.73×10 6 (0.53×10 6-9.85×10 6) /kg; P<0.001] were collected. The success rate of collection was 100.0% (67/67) versus 76.1% (51/67) ( P<0.001). Excellent rate of collection was 82.1% (55/67) versus 20.9% (14/67; P<0.001). Two patients in the ETO group switched protocols after 1 day of collection, and 11 patients in the CTX group switched protocols after 1-2 days of collection. ②Adverse reactions: granular deficiency with fever (21.5%[14/65] vs. 10.7%[6/56]; P=0.110), requiring platelet transfusion [10.7% (7/65) vs 1.8% (1/56) ; P=0.047]. ③Until the end of follow-up, 63 cases in the ETO group and 54 cases in the CTX group have undergone autologous transplantation. The median number of CD34 + cells infused in the two groups was 4.62×10 6 (2.14×10 6-19.89×10 6) /kg versus 2.62×10 6 (1.12×10 6-5.31×10 6) /kg ( P<0.001), neutrophil implantation time was 11 (9-14) d versus 11 (10-14) d ( P=0.049), and platelet implantation time was 11 (0-19) d vs. 12 (0-34) d ( P=0.035). One case in the CTX group experienced delayed platelet implantation. Conclusion:The mobilization scheme of etoposide combined with G-CSF requires relatively platelet transfusion, but the collection days are shortened. The collection success rate, excellent rate, and the number of CD34 + cells obtained are high, and the neutrophil and platelet engraftment is accelerated after transplantation.

microRNA(miRNA)is a 22nt long sin-gle-stranded non-coding RNA that is involved in a variety of physiological and pathological processes.Bronchial asthma is a heterogeneous disease,and airway inflammation is one of the important mecha-nisms of its pathogenesis.Asthma can be classified into different types based on the different immune mechanisms involved in its pathogenesis,and the mechanism of airway inflammation also varies be-tween different types of asthma.This article reviews the research progress of miRNA in asthma airway inflammation and endotype,and explores the pathogenesis and treatment prospects of miRNA in asthma airway inflammation and endotype.

Objective To obtain the monitoring measurement range of quality indicators of red blood cells,plasma and derivatives and leukocyte-reduced apheresis platelets provided by blood stations in Hebei province,explore the distribution of monitoring values and the change of monitoring level,so as to further strengthen the homogenization construction of quality control laboratories in blood stations in Hebei.Methods In 2023,the sampling data of 12 blood stations in Hebei from 2015 to 2022 were collected,scatter plots were made and the range markers were set,and the"mean±SD"line was taken as the upper limit and lower limit of the measurement range.In 2024,the monitoring values in 2023 were added,and the changes of two measurement ranges were compared to analyze the stability and overall level.Results Comparison of the measurement range from 2015 to 2022 and the measurement range from 2015 to 2023 showed that the standard deviation of the content of deleukocyte suspension of red blood cells-hemoglobin,washed erythrocyte-hemoglobin,washed erythrocyte-su-pernatant protein,cryoprecipitate coagulation factor-FⅧ,fresh frozen plasma-FⅧ,leukocyte-reduced apheresis platelets-leukocyte residue and leukocyte-reduced apheresis platelet-red blood cell concentration decreased from 8.132 to 7.993,6.252 to 6.104,0.273 to 0.267,57.506 to 56.276,0.920 to 0.892,0.653 to 0.644 and 2.653 to 2.603,respectively.The narrowing of the standard deviation range of the above items led to more concentrated monitoring values and reduced disper-sion.Comparison of the measurement range from 2015 to 2022 and the measurement range from 2015 to 2023 showed that the mean value of leukocyte residue of the deleukocyte suspension of red blood cells,hemoglobin content of the wash eryth-rocyte,protein content of supernatant of the wash erythrocyte,hemolysis rate of the wash erythrocyte,FⅧ content of the cryoprecipitate coagulation factor,plasma protein content of the fresh frozen plasma,FⅧ content of the fresh frozen plasma,platelet content of the leukocyte-reduced apheresis platelets changed from 0.362 to 0.476,44.915 to 44.861,0.280 to 0.283,0.137 to 0.142,133.989 to 133.271,60.262 to 60.208,1.301 to 1.277 and 3.036 to 3.033,respectively,and was closer to the national standard line,which reflects an increase in the number of unqualified monitoring values or values close to the national standard line in 2023.The long-term qualified rate of coagulation items was low,and no improvement has been ob-served.The stability of biochemical items has been enhanced but overall deviation has occurred,with the average value close to the national standard line.The possibility of subsequent testing failure has increased.The counting items showed no obvi-ous common characteristics.Conclusion The use of"mean±SD"in the analysis can visually display the distribution of mo-nitoring values of different items in Hebei,forming an indicator measurement range covering the past nine years.It shows the characteristics of each item,and provides reference for subsequent quality control laboratory data analysis of each blood sta-tions to takes active measures to improve the monitoring level.