Vascular endothelial growth factor(VEGF)is a major angiogenic factor that regulates multiple endothelial cell functions. After cerebral ischemia, VEGF not only promotes vascular endothelial proliferation and migration. involving in angiogenesis and increasing vascular permeability, but also plays important roles in both neuroprotection and neurogenesis. This article reviews the roles of VEGF in ischemic cerebral injury.

Objective:To build 3D digitized face model of unilateral orbital defect and to realize imitating design of defect section.Methods:Phase measuring profilometry was employed to acquire a 3-D digitized face model with open eyes.By Geomagic software,the image of normal orbit was extracted and mirrored with the image of the deformed side of the orbit.Results:A 3-D digitized face model of unilateral orbital defect was successfully reconstructed and 3-D normal orbit data of defect section was acquired.Conclusion:The use of phase measuring profilometry and RE software is a convenient and effective method to the computer-aided design for the restoration of unilateral orbital defect.

Objective:To evaluate the effects of pigment concentration on spectral reflectance of pigmented silicone elastomer.Methods: Six kinds of pigment at different concentrations was respectively added into MDX-4-4210 silicone elastomer to prepare six series of single-chroma-samples, including red, yellow, blue, brown, white and black.The pigment concentrations to base elastomer were set at 0.1, 0.2 , 0.3, 0.4, 0.5, 0.6,0.7, 0.8, 0.9 and 1.0C, respectively while other conditions were kept the same. C is the maximum pigment concentration in practical use. The target samples were also prepared. By spectrophotometer, the spectral data of the single-chroma-samples and target samples were measured.Results:With the increase of pigment concentration, the spectral reflectance of the six series of single-chroma-samples and target samples decreased.Conclusion:Increase of pigment concentration may result in decrease of spectral reflectance of single-chroma-samples and taget samples.

Objective:Through monitoring the pH of the growth medium,to evaluate the growth and/or acid production ability of Candida albicans on silicon elastomer incorporated with two different antifungal agents.Methods:Antifungal agents(AntimTM-AM and Conval pag-40)were added at concentrations from 0% to 2%,and antibacterial effect of the material in saliva and serum groups were examined.The third group added nothing was served as the control.Results:Each group with 2% antifungal agents showed great inhibitory effects on the acid production and /or the growth of C.albicans.These inhibitory effects consisted of a delay in the onset of rapid pH decline,decreased with the rate of pH change and increased in minimum pH.As a result,Conval pag-40 showed a significantly greater antimicrobial effect than AntimTM-AM.Conclusion:Silicone elastomer material incorporated with antifungal agents have strong antibacterial ability and can satisfy the requirements of clinical application.

Objective:To evaluate a new wax formed by laser sintering technology(SW-1)for dental use.Methods:The melting point,hardness and viscosity of SW-1,normal dental modeling wax and LongYuan's wax formed by laser sintering were tested and compared.Linear shrinkage,plastic deformation and toughness of SW-1 were estimated by national standards.Results:There were no significant differences between SW-1and the normal dental modeling wax in the properties of melting point 〔(61.1?1.63)℃,(61.7?1.96)℃〕and hardness 〔(75.2?0.62)HA,(74.0?0.54)HA〕;but when compared with melting point(78.3?1.07)℃and hardness(94.0?0.38)HA of LongYuan's wax formed by laser Sintering,those of SW-1 were significantly different.Viscosity of SW-1(2 016?136.9)MPa?s showed significant difference when compared with that of normal dental modeling wax(9.06?0.258)MPa?s and LongYuan's wax formed by laser Sintering(2 876?81.7)MPa?s.Linear shrinkage of SW-1(0.2%)met the national standards,while plastic deformation(10%,43 ℃)and toughness(broken when bent,20 ℃)of SW-1 did not meet such standards.Conclusion:SW-1 may be the proper laser sintering material for dental use,and has a good prospect in future.

Objective: To test the reliability of 3 dimentional (3D) laser surface scanner for nasal anthropometry.Methods:11 plaster nasal models were measured by 3D laser surface scanner and manual measurement. The data were statistically analyzed. Results:In 9 out of the 10 parameters of nasal anthropometry,the correlation coefficient of the distances and angels measured by the 2 means was 0.856-1.000(P

Objective To explore the clinical application of reconstructing silicone elastomer nose prosthesis by means of selected laser sintering and wax powder PCPI. Methods Laser scanning was used to get the 3-D data of a nose model. Surfacere 10.0 etc softwares was used to reconstruct the nose by mirroring the digitalized model of absent nose. Selective laser sintering and wax powder was chosen to fabricate a wax nose model and the nose prosthesis made by silicone clastomer. Results Perfect silicone clastomer nose prosthesis was made for 2 patients. Conclusion This study suggests that the wax nose model and the new wax powder can meet the requirement of clinical expectation for maxillofacial prosthesis.

Objective To investigate the effects of ischemic preconditioning (IP) on blood-brain barrier permeability and matrix metalloproteinase-9 expression after cerebral ischemia reperfusion in rats.Methods A total of 154 Wistar rats were randomly divided into sham operation (n = 14),non-ischemic preconditioning (NIP,n = 70),and IP (n = 70) group.The latter two groups were redivided into 5 subgroups (n = 14 in each subgroup).A middle cerebral artery occlusion model was induced by intraluminal suture method.After 10 minutes IP,re-ischemia for 2 hours and reperfusion for 22 hours were performed at day 1,3,7,14,and 21,respectively.The infarct volume was detected using 2,3,5-triphenyltetrazolium chloride (TTC)staining.The BBB permeability were evaluated by measuring the content of the extravascular exudation of Evan's blue (EB).The degree of cerebral edema was evaluated using the wet-dry weight method.MMP-9 protein and mRNA expression were detected by immunohistochemical staining and in situ hybridization.Results Compared to the corresponding subgroups in the NIP group,the neurological deficit scores,infarct volume,EB content,and brain water content were decreased significantly,and MMP-9 protein and mRNA expression were down-regulated significantly in the day 1,3,and 7 subgroups in the IP group (P ＜ 0.05 or P ＜ 0.01 ).The infarct volume and MMP-9 mRNA expression of the day 1,3,7 subgroups in the IP group were more significantly reduced or down-regulated than those of the day 14 and21 subgroups in the IP group.The EB content,brain water content,and MMP-9 protein expression of the day 3 and 7 subgroups were more significantly lower than those in other subgroups.Among them,they were decreased most significantly in the day 3 subgroup (P ＜ 0.05).Conclusions The changes of IP-induced BBB permeability and the down-regulated MMP-9 expression may play important roles in cerebral ischemic tolerance.

Objective: To develop a computer-aided three-dimensional design software and laser scanning technique for the restoration of unilateral orbital defect. Method: By laser scanning apparatus plaster face model and the acquired primitive face point data were scanned; with the three-dimensional design software the point data were reconstructed to one smooth face surface image and the data of the defect of the orbital tissue were obtained from the normal contralateral tissue data by software. Results: The face-model data obtained by laser scanning apparatus was distinct and precise; the Digisurf retrograde engineer software succeeded to fulfill the computer-aided design for restoration of unilateral orbital defect. Conclusion: The laser scanning technique and three-dimensional design software can be used in the computer-aided design of the unilateral orbital defect restoration.

Objective: To investigate the awareness of knowledge about HPV infections and the willingness to HPV vaccination among male university students in Tongzhou District, Beijing Municipality, so as to provide insights into the formulation of the HPV vaccination strategy among males. Methods: A total of 997 male university students in Tongzhou District were selected as the study subjects using a multi-stage stratified cluster random sampling method, and a self-designed questionnaire was used to investigate the awareness of HPV infections and HPV vaccine, and willingness to HPV vaccination. In addition, the factors affecting the willingness to HPV vaccination were identified. Results: A total of 935 subjects were enrolled, with a mean age of (19.08±1.38) years, and there were 570 subjects with a Beijing household registration (60.96%). Among the 313 male university students that had heard of HPV, the awareness of HPV and HPV-related diseases was 59.42%, and among the 300 male university students that had heard of HPV vaccines, the awareness of HPV vaccines was 75.33%. The willingness to HPV vaccination was 38.50%, and the willingness was high among male university students with a non-Beijing household registration ( χ2=3.971, P=0.046 ), high household annual income ( χ2trend=6.219, P=0.013 ), short distance to vaccination clinics ( χ2=19.238, P<0.001 ), having heard of HPV ( χ2=11.188, P=0.001 ), having heard of HPV vaccine ( χ2=14.548, P<0.001 ), awareness of HPV and related diseases ( χ2=16.855, P<0.001 ) and awareness of HPV vaccine ( χ2=19.299, P<0.001 ). Conclusions The awareness of HPV and HPV vaccines and the willingness to HPV vaccination are low among male university students in Tongzhou District. Improving the correct recognition of HPV and HPV vaccines and the access to vaccination services are helpful to improve the willingness to HPV vaccination among male university students.