Objective: To explore the effect of bortezomib on migration and invasion of cervical carcinoma HeLa cell and specific molecular mechanism. Methods:The effect of bortezomib on the viability of HeLa cell was measured by MTT assay. The effect of bortezomib on cell migration and invasion was measured by Transwell assay and invasion experiment respectively. The activation of Akt/mTOR signaling pathway and expression level of MMP2, MMP9 were assayed by western blot. Results:MTT assay indicated bortezomib (2.5μM, 5μM, 10μM) could inhibit HeLa cell viability, and the inhibitory rate was highest at 48 h. Transwell assay and invasion experiment results showed that bortezomib inhibited HeLa cell migration and invasion. Western blotting assays presented bortezomib could suppress the phosphorylation of Akt and mTOR, and down-regulate the expression of MMP2 and MMP9. Conclusions:These results suggested bortezomib could inhibit migration and invasion in cervical carcinoma HeLa cell, which might be related to Akt/mTOR signal pathway.

Objective To study the micro-hardness distribution of ulna and explore its correlation with surgical procedures of ulnar fractures,internal fixator,total elbow arthroplasty and the epidemiology of ulna fracture.Methods The ulna wasdivided into proximal metaphysis,diaphysis,and distal metaphysis.The proximal metaphysis was divided into the olecranon and the metaphysis olecranon of ulna.Thedistal epiphysis included the head of ulna.The shaft of the ulna was divided equally into nine segments.Each ulna was sawed by a band saw into twelve parts,which were prepared for the micro-indention testing.The micro-indention testing samples precision cuts were conductedwith a Buehler Isomet 11-1280-250 low speed diamond saw.Each micro-indention sample was cut 3mm thickness and fixed on glass sheet with epoxy resin.The samples surface was polished with progressive grades of sandpaper.Micro-indentation was pedormed on each bone sample sudace using a vicker micro-hardness tester,and the hardness value were measured as Hardness value (HV,HV=kgf/mm2).Twenty indentions were randomly selected on each sample,which were equally divided into four quadrants (anterior,medial,posterior and lateral).Hence,a total of 720 micro-indentations were pedormed on the three ulna.Before indention,each sample was controlled under the optical microscope where the bone surface was intact and not damaged.The micro-indentations were performed on each sample with a load of 50 g.The indentation time was set to 12 s.Hardness value (HV/0.05) was computed for each indentation.The lengths of the diagonals were measured under reflected light microscopy,and the Vickers hardness value was calculated.Indentations in which one diagonal was 10％ longer or more than the other were ignored.The indention was repeated.These preliminary data were used to determine the appropriate sample size of micro =indentation to be performed on each bone segment.SPSS 19.0 statistical software was used for statisticalanalysis.The one =way ANOVA analysis was used to compare the difference of bone micro-hardness values in different parts,and P ＜ 0.05 was statistically significant.Results The hardest part of the ulna is the lower ulnaand the value of micro-hardness was 47.77 HV.The least hard part was the head of ulna and the value of micro-hardness was 29.64 HV.The proximal metaphysis hardness value was 34.39 HV.The shaft hardness value was 43.47 HV.Thedistal metaphysis hardness value was 29.64 HV.The hardness was higher in diaphysis than metaphysis in the ulna with statistical significance.There was no statistically significant difference in the hardness of ulna anterior,medial,posterior and lateral quadrant.Conclusion It is demonstrated that the micro-hardnessof ulna shaft is significant higher than other two parts of ulna.The micro-hardness value difference was not significant among the anterior,medial,posterior and lateral quadrant.This study revealed the distribution rule of ulna micro-hardness and provided data support for the total elbow arthroplasty with human physiological characteristics through 3D printing.

Objective: To investigate the microhardness distribution of cancellous bone in the proximal tibia and its clinical significance. Methods: Three fresh tibias were obtained and examined by X-ray and CT to exclude skeletal pathologies, such as osteoporosis, osteoarthritis. According to the Heim's square, the proximal tibias were cut off. Each of the proximal tibias was divided into three parts, the medial condyle, the intercondylar area and the lateral condyle. Each part was divided into three sections, proximal, middle and distal sections. Each of the proximal tibias was divided into 9 regions. Bone specimens with a thickness of 3 mm were taken from each region using a high precision low-speed saw and fixed on flat sheets. The microhardness of the bone tissue was measured using a Vickers microhardness tester after polish. Ten effective micro-indentation tests were conducted in each region. After measurement the diagonal length of the indentations, the microhardness values were calculated via software provided by the hardness tester. Analysis of variance and Tukey method were used to compare the microhardness values of different parts, sections and regions of cancellous bone. The microhardness distribution of the proximal tibia was analyzed. Results: A total of 270 effective indentations were made in the specimens, and the microhardness values were obtained. The average microhardness of the three proximal tibias was 40.98±3.44, 34.92±4.64 and 39.49±3.86 HV, respectively. There was a significant difference among the groups (F=55.87, P=0.000). The microhardness distribution of bone tissue in the three proximal tibias was similar. In the comparison of different parts, the microhardness of medial condyle was greater than that of the lateral condyle, which was larger than that of the intercondylar area. The difference between the parts was statistically significant (F=18.42, 8.236, 10.877; P=0.000, 0.001, 0.000). In the comparison of different sections, the microhardness of the distal section was greater than that of the proximal section, which was larger than that of the middle section. The difference between the sections was statistically significant (F=8.720, 17.140, 6.142; P=0.000, 0.000, 0.003). The microhardness distribution was similar among different regions. The region with the highest microhardness is the medial condyle of the distal section with microhardness of 44.87±3.25 HV (range 39.2-49.7 HV). The lowest microhardness was in the intercondylar area of the middle section with hardness of 29.41±4.53 HV (range 24.8-36.2 HV). Conclusion The microhardness value of cancellous bone near the articular surface at the proximal tibia was smaller, which could disperse the load and protect the fragile of articular cartilage. Furthermore, the microhardness of the transition zone is larger. The microhardness value of the cancellous bone in medial tibia condyle is the greatest, which is related to load-bearing.

Objective: To analyze the consistency of gastroscopic biopsy in the diagnosis of high grade intraepithelial neoplasia(HGIN) and postoperative pathological diagnosis, and explore the risk factors associated with missed diagnosis of HGIN. Methods: From January 2012 to December 2018, the clinical data of 63 patients who were diagnosed with HGIN by gastroscopic biopsy prior to operation and underwent complete resection in the Union Hospital, Tongji Medical College, Huazhong University of Science and Technology were retrospectively analyzed. There were 55 males and 8 females, with a median age of 60 (35 to 76) years old. The gender, age, endoscopic lesion shape, longest diameter, CT image and inflammatory markers were analyzed, to investigate the correlation between them and pathological upgrading after operation. Receiver operating characteristic (ROC) curve was drawn to analyze the cut off value of measurement data, and the comparison of count data was performed by chi-square test or Fisher exact probability method. Univariate analysis was used to screen potential risk factors, and multivariate logistic regression analysis was futher utilized to analyze the independent risk factors of postoperative pathological upgrading. Results: A total of 63 patients were enrolled, including 47 cases underwent surgical resection and 16 cases underwent endoscopic submucosal dissection(ESD). Among them, 19 patients(30.2%) were pathologically diagnosed with HGIN, while 44 patients(69.8%) were pathologically diagnosed with invasive cancer after resection. Preoperative contrast-enhanced CT showed that 11 patients(17.5%) with perigastric fat spiculation around the lesion, all of which were confirmed as invasive carcinoma after operation. Univariate analysis showed that the longest diameter of the lesion ≥2 cm (P=0.002), ulcer lesions under gastroscopy (P=0.013), platelet to lymphocyte ratio (PLR) ≥103 (P=0.030), lymph node enlargement (P=0.046) and spiculation of the perigastric fat (P=0.025) were significant differences between the groups. Logistic regression analysis showed that the longest diameter of the lesion ≥2 cm (P=0.033) and ulcer lesions under gastroscopy (P=0.007) were independent risk factors for predicting postoperative pathological upgrading. Conclusions Gastroscopy biopsy in the diagnosis of high-grade intraepithelial neoplasia of the stomach has poor consistency with pathological diagnosis after operation. Clinicians should take active surgical intervention, especially for cases with the longest diameter of the lesions ≥2 cm, ulcer or perigastric fat spiculation on CT.

Among the current curricula of medical teaching in China, most courses focus on the integrated teaching of a single organ-system combination, while there are relatively a few integrated courses that focus on the multiple dimensions between different organs and systems and between medical sciences and social sciences. In 2016, Chongqing Medical University started to cooperate with University of Leicester to establish the clinical medicine major and introduced the course of Integration for Clinical Application (ICA) that had been run well in University of Leicester for years. With reference to the education goal of our university, the curriculum group adopted a series of actions for the localization of this course from the aspects of teaching objectives, contents, teaching model, education resources, and quality of faculty. After the completion of the first round of this course, the passing rate reached 86.96%(100/115) in the quantified evaluation of accomplishment, which was higher than the passing rate of other courses introduced from University of Leicester. The quantitative expert assessment of this course also ranked among the top courses in our university, and student assessment showed that the ability indicators were improved by 25.00%- 38.00%. The above data show that good results have been achieved for the curriculum localization of ICA.

Objective: To investigate the distribution characteristics and significance of bone hardness in different segments and layers of clavicle. Methods: The right clavicles of three fresh Chinese corpses were taken and then divided into proximal, middle and distal segments according to Allman's classification. The clavicles were cut with diamond saw in the vertical of long axis equidistant exactly into 15 layers (proximal: 3 layers; midshaft: 7 layers; distal: 5 layers), and each layer was divided into four directions: superior, inferior, anterior, and posterior. The bone hardness were measured by Vickers microindentation, HV(kgf/mm²). The distribution of bone hardness was recorded and analyzed. Results: A total of 180 parts of cortical bone were measured, generating 900 measurements. Meanwhile, a total of 45 parts of cancellous bone were measured, generating 225 measurements. We found that: (1)The average hardness of cortical bone was (35.9±8.1)HV, and the midshaft segment [(41.3±6.8)HV] was harder than the proximal segment [(33.8±6.1)HV] and the distal segment [(29.7±5.4)HV](P<0.05); (2)The average hardness of cancellous bone was (30.7±6.2)HV, and there were significant differences among the midshaft segment [(34.5±5.5)HV], the proximal segment [(29.2±2.9)HV] and the distal segment [(26.3±5.1)HV](P<0.05); (3)for cortical bone, the hardest segment was the fifth layer of the midshaft segment [(44.8±8.6)HV] while the most soft segment was the fourth layer of the distal segment [(28.0±3.5)HV](P<0.05); (4)for cancellous bone, the hardest segment was the fifth layer of the midshaft segmnet [(36.8±5.1)HV] while the most soft was the fifth layer of the distal segment [(23.0±4.4)HV](P<0.05); (5)There were no statistically significant differences among four directions of segments(P>0.05). Conclusion The microindentation hardness varies greatly among different segments and layers of the clavicles. The cortical bone and cancellous bone have consistent hardness changes, which shows that the middle segment is obviously harder than the proximal and distal segments with a gradually gradient decreasing trend from the middle to both ends. The data can be used to guide the design of 3D printing implants that conform to the stress conduction characteristics of the clavicle under physiological conditions, and provide good data support for the modeling and finite element analysis of the clavicle under simulated physiological conditions.