Objective:To introduce a novel method of endoscopic forehead lift and its follow-up results.Methods:In the past 7 years, 119 patients underwent endoscopic forehead lift. The parallel incisions were made on the frontalis muscle to relieve the wrinkles of the forehead. Glabella muscles were partially bluntly bitten by minimally invasive forceps. No fixator or suture was applied during the operation. Postoperative FACE-Q scales were issued to patients, and the changes of eyebrow position before and after operation were measured.Results:One week postoperatively, glabella frown and forehead wrinkles were relieved or eliminated as the swell gone. The eyebrow measurement outcome showed that the eyebrows of the patients were definitely raised after the operation. The results of FACE-Q scales showed that patients were highly satisfied with the improvement of frontal wrinkles and glabella frown wrinkles, and with the surgical outcomes and decisions. The patients thought they were averagely 7 years younger after operation. The most common complication was temporary frontal skin numbness, followed by hairline regression.Conclusions:The endoscopic forehead lift can effectively improve the forehead wrinkles and the glabella frown wrinkles which meets the demands of Chinese patients.

Objective:To explore the technique procedure for comprehensive facial rhytidectomy, and to evaluate the surgical outcome.Methods:A total of 126 patient received comprehensive facial rhytidectomy were involved in this study and the outcomes were evaluated by using 14 FACE-Q scales.Results:Totally 44 patients completed the FACE-Q scales, with the follow-up of 6 to 86 months, with an average of 27.9 months. The overall satisfaction was 87.30±10.79 (mean±standard deviation), satisfaction with forehead and brow was 92.16±10.12, satisfaction with cheekbones was 93.30±6.95, satisfaction with cheek was 91.20±10.17, and satisfaction with neck was 87.16±9.65; appraisal of overall lines was 87.57±9.71, appraisal of forehead lines was 91.80±10.23, appraisal of glabella lines was 90.43±10.76, appraisal of nasolabial fold was 88.25±12.10, and appraisal of crow＇s feet was 91.52±13.66; social function scores were 88.70±9.40, psychological function scores 88.77±10.49, surgical decision satisfaction scores 90.86±9.06, and surgical outcome satisfaction scores 90.03±10.61. Self-evaluation was 8.33±3.15 years younger. There was no statistically significant difference in the scale results between the age groups of <40 years, 40-50 years, and >50 years.Conclusions:Comprehensive facial rhytidectomy is a systematic and thorough surgical solution for rejuvenation. This procedure is proved to be of high satisfactory degree in short and long-term follow-up by FACE-Q scales.

Objective To analyze the clinical characteristics,pathology,CT characteristics and targeted therapy of primary retroperitoneal leiomyosarcoma treated at our institution during the past 20 years.Methods A retrospective review was performed among 11 patients of this disease.The main performances were hematuria,abdominal mass and abdominal pain.Non-enhanced CT scanning showed soft tissue density in all cases.Tri-phase enhanced scanning showed reinforcement in different degrees.Pathology results showed tissue necrosis.The pathology featured by routine HE and immumohistochemical staining.Results Surgical treatment was performed in all 11 patients.Postoperative pathology showed that median tumor diameter was 14.40cm.Spindle cell,cellular abnormity and mitotic figures could be seen through light microscope.During follow-up,3 cases recurrenced after 2 months,3 years and 5 years respectively.Conclusions Primary retroperitoneal leiomyosarcoma might have a high fatality rate and high recurrence rate.The clinical and CT features are unapparent.Pathology diagnosis is reliable,surgery is necessary to prolong life and cure disease.

Objective To explore the feasibility of our method on assessing the three-dimensional facial morphological features based on three-dimensional surface imaging techniques.Methods According to the admission criteria,three-dimensional facial images of 34 attractive young Chinese women and 172 healthy reference young women were selected from the three-dimensional facial images database of our department.For those images,anthropometric facial measurements including facial height,width,the degree of convexity and concavity were computed using three-dimensional surface imaging techniques combined with three-dimensional coordinate system.The variance between attractive group and reference group was analyzed and the facial morphological features of each group were preliminarily summarized.Results Both groups met the criteria of mesoprosopy,not the "vertical facial trisection and rule of fifths".The attractive group had a relatively narrow anterior facial frame,a more rounded and full upper face compared with the reference group.They also had smaller intercan thai width compared with the reference group.Moreover,the attractive group showed more prominent nose,more full and prominent medial cheek.In addition,the attractive group shared less protruded upper lips and less retruded chin compared with the reference group.Conclusions Assessing facial morphology using three-dimensional surface imaging techniques is a convenient and feasible method.The evaluation of sagittal facial convexity and concavity is an indispensable part of facial morphology features assessment.

BACKGROUND: The phenotype maintenance of diced cartilage is a very important factor to reduce cartilage absorption rate in augmentation rhinoplasty. A novel method which combined diced cartilage with chondrocyte spheroids in gelatin methacrylate (GelMA) hydrogel may have potentially good performance in phenotype maintenance, and is worth exploring. METHODS: The complex grafts formed by loading diced cartilage with chondrocyte spheroids into GelMA hydrogel were used as the experimental group, and the grafts formed of diced cartilage in GelMA were used as the control group.The two groups of grafts were implanted subcutaneously in nude mice. After 1 month and 3 months, the grafts were taken for general observation and histological analysis. The diameter changes of cartilage, the nuclei loss of chondrocyte, and glycosaminoglycan secretion were analyzed. RESULTS: Chondrocyte spheroids with obvious proliferation can be seen in the experimental group. Some diced cartilages had become a whole through the interconnection of chondrocyte spheroids. In addition, the diameter of the chondrocyte spheroids—diced cartilage complex in the experimental group increased significantly, and its nuclei loss rate was less than 1/2 of that in the control group. The maintenance of proteoglycans in diced cartilages in the experimental group was significantly better than that in the control group. CONCLUSION The combination of diced cartilage with chondrocyte spheroids in GelMA hydrogel can significantly reduce the absorption of cartilage extracellular matrix, enhance phenotype maintenance during subcutaneous ectopic implantation, and can produce inter-chondral connections.

BACKGROUND: As a contour-supporting material, the cartilage has a significant application value in plastic surgery.Since the development of hydrogel scaffolds with sufficient biomechanical strength and high biocompatibility, cell-laden hydrogels have been widely studied for application in cartilage bioengineering. This systematic review summarizes the latest research on engineered cartilage constructed using cell-laden hydrogel scaffolds in plastic surgery. METHODS: A systematic review was performed by searching the PubMed and Web of Science databases using selected keywords and Medical Subject Headings search terms. RESULTS: Forty-two studies were identified based on the search criteria. After full-text screening for inclusion and exclusion criteria, 18 studies were included. Data collected from each study included culturing form, seed cell types and sources, concentration of cells and gels, scaffold materials and bio-printing structures, and biomechanical properties of cartilage constructs. These cell-laden hydrogel scaffolds were reported to show some feasibility of cartilage engineering, including better cell proliferation, enhanced deposition of glycosaminoglycans and collagen type II in the extracellular matrix, and better biomechanical properties close to the natural state. CONCLUSION Cell-laden hydrogels have been widely used in cartilage bioengineering research. Through 3-dimensional (3D) printing, the cell-laden hydrogel can form a bionic contour structure. Extracellular matrix expression was observed in vivo and in vitro, and the elastic modulus was reported to be similar to that of natural cartilage. The future direction of cartilage tissue engineering in plastic surgery involves the use of novel hydrogel materials and more advanced 3D printing technology combined with biochemistry and biomechanical stimulation.

Objective:To investigate the clinical effect of autologous fat transplantation combined with hair transplantation in the treatment of hard and/or thin scalp flat scar after burn.Methods:The clinical data of patients with hard and thin scalp scar after burn admitted to the Department of Plastic Surgery of Peking University Third Hospital from January 2017 to December 2022 were retrospectively analyzed. Fat was extracted from the lower abdomen or outer thigh during the operation, and then injected into the scalp scar after standing for 15 minutes, about 0.8 ml/cm 2 under the hard and/or thin scar area, and 0.2-0.4 ml/cm 2 under the thick and soft scar area. Three months after fat transplantation, hair transplantation was performed in the scar bald area, and the transplant density was 25-35 follicular units (FUs)/cm 2 in the hard and thin scar area, and 30-40 FUs /cm 2 in the thick and soft scar area. The Vancouver scar scale (VSS) was used by two third party plastic surgeons to score the hard and/or thin scar areas of the scalp before and 3 months after scalp fat transplantation. The VSS score was expressed as M ( Q1, Q3), and the preoperative and postoperative data were compared by paired sample Wilcoxon signed rank test. During hair transplantation, the density of implanted hair in the hard and/or thin scar area were recorded. The density of living hair at these sites was measured at the last follow-up, and then the survival rate of hair (living hair density/implant hair density ×100%) was calculated. A third party plastic surgeon evaluated the extent to which scalp scars in the hair transplant area were covered, including completely covered, basically covered, partially covered. Patients’ evaluation with the surgical result was divided into very satisfied, satisfied and dissatisfied. Results:A total of 57 patients with scalp scar after burn were included in this group, including 31 males and 26 females, aged 13-47 years old. The time from scalp scarring to treatment was 8-41 years. The area of scalp scar was 17-120 cm 2, with an average of 63.3 cm 2. The fat injection volume of 57 patients was 13-75 ml. The hair transplantation was performed 3-8 months after a single fat filling procedure. The total amount of hair transplantation was 510-3 120 FUs. The total score of postoperative scar VSS was 4(3, 4), significantly lower than the preoperative score of 7(6, 7) ( W=6.70, P < 0.001). The color, thickness, blood vessel distribution and softness were significantly reduced compared with those before surgery ( P< 0.01). All patients were followed up for 12-18 months (mean, 14 months) after hair transplantation. The survival rate of hair in hard and thin scar area was 68.2% (22.7 FUs/cm 2/33.3 FUs/cm 2) to 89.7% (26.1 FUs/cm 2/29.1 FUs/cm 2), with an average of 81.3%. In 32 patients, scalp scars were completely covered. The scalp scar of 25 patients was basically covered. Twenty-nine patients were very satisfied with the result of the operation, and 28 patients were satisfied. Conclusion:The high survival rate of hair transplantation can be obtained by injecting fat under the hard and/or thin scalp scars before hair transplantation, which is an effective method to repair scalp scars.

Objective:To investigate the clinical effect of autologous fat transplantation combined with hair transplantation in the treatment of hard and/or thin scalp flat scar after burn.Methods:The clinical data of patients with hard and thin scalp scar after burn admitted to the Department of Plastic Surgery of Peking University Third Hospital from January 2017 to December 2022 were retrospectively analyzed. Fat was extracted from the lower abdomen or outer thigh during the operation, and then injected into the scalp scar after standing for 15 minutes, about 0.8 ml/cm 2 under the hard and/or thin scar area, and 0.2-0.4 ml/cm 2 under the thick and soft scar area. Three months after fat transplantation, hair transplantation was performed in the scar bald area, and the transplant density was 25-35 follicular units (FUs)/cm 2 in the hard and thin scar area, and 30-40 FUs /cm 2 in the thick and soft scar area. The Vancouver scar scale (VSS) was used by two third party plastic surgeons to score the hard and/or thin scar areas of the scalp before and 3 months after scalp fat transplantation. The VSS score was expressed as M ( Q1, Q3), and the preoperative and postoperative data were compared by paired sample Wilcoxon signed rank test. During hair transplantation, the density of implanted hair in the hard and/or thin scar area were recorded. The density of living hair at these sites was measured at the last follow-up, and then the survival rate of hair (living hair density/implant hair density ×100%) was calculated. A third party plastic surgeon evaluated the extent to which scalp scars in the hair transplant area were covered, including completely covered, basically covered, partially covered. Patients’ evaluation with the surgical result was divided into very satisfied, satisfied and dissatisfied. Results:A total of 57 patients with scalp scar after burn were included in this group, including 31 males and 26 females, aged 13-47 years old. The time from scalp scarring to treatment was 8-41 years. The area of scalp scar was 17-120 cm 2, with an average of 63.3 cm 2. The fat injection volume of 57 patients was 13-75 ml. The hair transplantation was performed 3-8 months after a single fat filling procedure. The total amount of hair transplantation was 510-3 120 FUs. The total score of postoperative scar VSS was 4(3, 4), significantly lower than the preoperative score of 7(6, 7) ( W=6.70, P < 0.001). The color, thickness, blood vessel distribution and softness were significantly reduced compared with those before surgery ( P< 0.01). All patients were followed up for 12-18 months (mean, 14 months) after hair transplantation. The survival rate of hair in hard and thin scar area was 68.2% (22.7 FUs/cm 2/33.3 FUs/cm 2) to 89.7% (26.1 FUs/cm 2/29.1 FUs/cm 2), with an average of 81.3%. In 32 patients, scalp scars were completely covered. The scalp scar of 25 patients was basically covered. Twenty-nine patients were very satisfied with the result of the operation, and 28 patients were satisfied. Conclusion:The high survival rate of hair transplantation can be obtained by injecting fat under the hard and/or thin scalp scars before hair transplantation, which is an effective method to repair scalp scars.

Objective:To establish a three-dimensional finite element model of the nose, simulate and analyze the deformation of nasal tissue caused by different focal points, traction directions, and modes, provide the theoretical basis for the effectiveness of physical traction therapy, and guide the clinical selection of more efficient physical traction therapy methods.Methods:A finite element model of the nose was established by ANSYS Workbench 19.2 software based on image data obtained from CT scans of a 29-year-old male volunteer with normal nasal appearance in Peking University Third Hospital. Two focal points, the nasal tip, and the nasal columella, were selected, and three force directions, parallel to the forward, forward and down 30°, forward and down 60°, were applied. The deformation caused by different traction conditions on the skin, lining, and soft bone parts, as well as the four anatomical landmarks of the nasal tip, nasal root, the midpoint of the nasal columella, and the nasal base, were compared. The deformation produced by 10 minutes of continuous pulling and 10 times 1-minute pulse pulling were compared under the same pulling conditions. The deformations generated by two types of pulling modes within a 24-hour cycle: a single 1-hour cycle and 6 intermittent 10-minute cycles, were compared.Results:All traction conditions resulted in deformation of the nasal model, with the maximum deformation of the nasal tissue obtained by pulling forward and downward at 60° (4.632 9 mm) which was greater than other traction conditions (0.825 0-3.105 0 mm). The maximum deformation value was located near the nasion of the model’s skin layer. The deformation obtained by 10 minutes of continuous pulling (0.176 6 mm) was slightly greater than that obtained by 10 times of 1-minute pulse pulling (0.176 5 mm). Within 24 hours, the final deformation of multiple intermittent pulling modes (0.019 0 mm) was greater than that of a single pulling mode (0.004 3 mm).Conclusion:Physical traction can effectively deform the skin and soft tissue of the nose, and the most efficient operation is to continuously pinch the tip of the nose for a short period and apply tension parallel to the back of the nose downwards, repeating every a few hours.

Objective:To establish a three-dimensional finite element model of the nose, simulate and analyze the deformation of nasal tissue caused by different focal points, traction directions, and modes, provide the theoretical basis for the effectiveness of physical traction therapy, and guide the clinical selection of more efficient physical traction therapy methods.Methods:A finite element model of the nose was established by ANSYS Workbench 19.2 software based on image data obtained from CT scans of a 29-year-old male volunteer with normal nasal appearance in Peking University Third Hospital. Two focal points, the nasal tip, and the nasal columella, were selected, and three force directions, parallel to the forward, forward and down 30°, forward and down 60°, were applied. The deformation caused by different traction conditions on the skin, lining, and soft bone parts, as well as the four anatomical landmarks of the nasal tip, nasal root, the midpoint of the nasal columella, and the nasal base, were compared. The deformation produced by 10 minutes of continuous pulling and 10 times 1-minute pulse pulling were compared under the same pulling conditions. The deformations generated by two types of pulling modes within a 24-hour cycle: a single 1-hour cycle and 6 intermittent 10-minute cycles, were compared.Results:All traction conditions resulted in deformation of the nasal model, with the maximum deformation of the nasal tissue obtained by pulling forward and downward at 60° (4.632 9 mm) which was greater than other traction conditions (0.825 0-3.105 0 mm). The maximum deformation value was located near the nasion of the model’s skin layer. The deformation obtained by 10 minutes of continuous pulling (0.176 6 mm) was slightly greater than that obtained by 10 times of 1-minute pulse pulling (0.176 5 mm). Within 24 hours, the final deformation of multiple intermittent pulling modes (0.019 0 mm) was greater than that of a single pulling mode (0.004 3 mm).Conclusion:Physical traction can effectively deform the skin and soft tissue of the nose, and the most efficient operation is to continuously pinch the tip of the nose for a short period and apply tension parallel to the back of the nose downwards, repeating every a few hours.