OBJECTIVE: To measure the three-dimensional morphology of the labial supraosseous gingiva (SOG) and the thickness of related labial bone in maxillary anterior teeth of periodontally healthy Han nationality youth using soft tissue indirect imaging cone-beam computed tomography (CBCT). METHODS: Twenty-five periodontally healthy subjects (11 males and 14 females) with 150 maxillary anterior teeth were involved in this study. A special impression with radiopaque material including the maxillary teeth was made, then a CBCT scan with the elastomeric matrix in position was taken for each subject. The imaging data were generated and transferred to a volumetric imaging software in which three-dimensional reconstruction was conducted and the image analyses were carried out. Measurements were made at the site of labial center of the maxillary anterior teeth. The height of the SOG, the distance between cemento-enamel junction (CEJ) and bone crest, the gingival thickness at the CEJ, and the thickness of bone 2 mm below the labial bone crest were measured and the correlation analysis between the parameters was made. All the data analyses were performed using SPSS 22.0. The data were analyzed with ANVOA and Pearson correlation tests with the significance level at α=0.05. RESULTS: The mean SOG values were (3.49±0.70) mm, (3.48±0.81) mm, and (3.54±0.67) mm for central incisors, lateral incisors and canines, respectively. There were no statistically significant differences among the different sites (P > 0.05). The mean gingival thickness values were (1.45±0.23) mm, (1.13±0.24) mm, (1.14±0.22) mm for central incisors, lateral incisors and canines, respectively. The gingival thickness of the central incisors was the largest among the maxillary anterior teeth with statistically significant difference (P < 0.05). No correlation was found between the SOG and gingival thickness among the maxillary anterior teeth (P > 0.05). CONCLUSION The gingival thickness of central incisors was the largest and the supraosseous gingival height had no correlation with gingival thickness among the periodontally healthy maxillary anterior teeth.
Adolescent ; Cone-Beam Computed Tomography ; Female ; Gingiva/diagnostic imaging* ; Humans ; Incisor/diagnostic imaging* ; Male ; Maxilla/diagnostic imaging* ; Tooth Cervix

Objective: To measure the labial gingival thickness and bone lamella thickness in the maxillary anterior area using digital method, and to analyze the correlation between the two, so as to provide a reference for esthetic restoration and implantation treatment of the upper anterior area. Methods: Fifty-seven patients [23 males, 34 females, (25.8±4.5) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to October 2020. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. The image data was fitted and registered by the 3Shape software. The gingival thickness at 2 mm below the gingival margin, bone thickness and gingival thickness at 2 and, 4 mm below the crest of the labial alveolar crest in maxillary central incisors, lateral incisors and canines, were measured. Results: The gingival thickness at 2 mm below the gingival margin of maxillary central incisors, lateral incisors and canines was (1.42±0.21), (1.19±0.17) and (1.23±0.20) mm respectively (F=12.47, P<0.001). The gingival thickness at 2 mm below gingival margin and 4 mm below crest of residual ridge in the male patients were (1.31±0.21) and (0.67±0.22) mm, and those in the female patients were (1.26±0.22) and (0.58±0.19) mm respectively, and there were statistically significant differences in the gingival thickness between the "2 mm below gingival margin" group and the "4 mm below crest of residual ridge" group (t=2.01 and 3.97, P<0.05). There was a positive correlation between gingival thickness and alveolar bone thickness at 2 mm and 4 mm below the crest of residual ridge in maxillary anterior region, and the correlation coefficients (r) were 0.387 and 0.344 respectively (P<0.05). Conclusions: Gingival thickness of maxillary anterior area is related to the tooth position and gender. The gingival thickness of men is greater than that of women.The gingival thickness at 2 and 4 mm below the crest of the alveolar crest is positively correlated with the thickness of the alveolar bone.
Adult ; Alveolar Process/diagnostic imaging* ; Cone-Beam Computed Tomography ; Esthetics, Dental ; Female ; Gingiva/diagnostic imaging* ; Humans ; Incisor/diagnostic imaging* ; Male ; Maxilla/diagnostic imaging* ; Young Adult

OBJECTIVETo investigate the features of the fill of interdental spaces by gingival papillae and the associated factors.

METHODSFifteen volunteers with healthy gingiva were involved in this study. The height and thickness on the alveolar crest level of 62 maxillary anterior papilla were measured radiographically with cone-beam computed tomography (CBCT) scans. A standardized periodontal probe with Williams markings was used for measurements of the papilla width on the alveolar crest level.

RESULTSWhen the papilla was complete fill interdentally, the mean height of papillary tissue on the alveolar crest level (equal to contact point-bone crest) was (3.67 ± 0.51) mm. The mean thickness of papilla on the alveolar crest level was (8.38 ± 0.75) mm. The papilla height had a positive correlation with papilla thickness (r = 0.433, P < 0.001).

CONCLUSIONSThe cone-beam computed tomography can be used for clear visualization of the papilla profile and the measurements of papilla height and thickness. Thicker and wider tissue was associated with an increased likelihood of having a complete papilla fill.

Adult ; Alveolar Process ; anatomy & histology ; diagnostic imaging ; Cone-Beam Computed Tomography ; Esthetics, Dental ; Female ; Gingiva ; anatomy & histology ; diagnostic imaging ; Humans ; Incisor ; anatomy & histology ; diagnostic imaging ; Male ; Maxilla ; Odontometry

OBJECTIVETo establish a convenient, objective and applicable method to assess gingival biotype using periodontal probing.

METHODSA total of 66 maxillary anterior teeth from 14 volunteers (6 males, 8 females) with healthy gingiva, aged from 20 to 30 years, were recruited in this study. The gingival biotypes were evaluated by whether or not the outline of the periodontal probe was clear inside the gingiva. Gingival thickness of the cemento-enamel junction (CEJ) in upper anterior teeth was measured by cone-beam CT (CBCT).

RESULTSThe method of periodontal probing-assessed gingival biotype had good consistency and repeatability. The result of probing-assessed gingival biotype was consistent with that obtained by CBCT. The mean thickness of gingiva in thin, compromised and thick gingival biotype was (1.02 ± 0.20), (1.28 ± 0.25) and (1.46 ± 0.25) mm. These differences were significant for all three comparisons (P = 0.001, respectively).

CONCLUSIONSPeriodontal probing-assessed gingival biotype is a simple, relatively objective and suitable method for clinical examination.

Adult ; Cone-Beam Computed Tomography ; Female ; Gingiva ; anatomy & histology ; diagnostic imaging ; Humans ; Male ; Periodontal Index ; Periodontics ; instrumentation ; Tooth Cervix ; diagnostic imaging ; Young Adult

OBJECTIVETo investigate the correlation among the morphology of crown, alveolar ridge crest and gingiva in maxillary anterior region of adults and to provide anatomical basis for clinical implant esthetics.

METHODSSixty Han-Chinese with healthy peridontium were selected in this study. The curvature of labial alveolar crest, the length and height of inter-proximal bone were measured on 3-D model reconstructed from cone-beam CT (CBCT) images, and the curvature of free gingiva, the width and height of inter-dental papilla and central incisor crown were evaluated on casts. The ratio of crown width to height was ranked and the 10 ranked highest were categorized as group Short-Wide (SW), the 10 ranked lowest were selected as group Long-Narrow (LN).

RESULTSIn maxillary anterior region, the curvature angle of both alveolar crest and marginal gingiva were significantly different among different tooth regions, but the alveolar and gingival curvature was significantly correlated in the same region (P < 0.05). The morphology of inter-proximal bone and papilla was significantly correlated (P < 0.01), except the region between central and lateral incisors (P = 0.625, P > 0.05). Compared to group SW, group LN formed a pronounced scalloped contour of gingival margin (P = 0.002) and slender inter-dental papilla (P = 0.000).

CONCLUSIONSThe free gingival curvature and inter-dental papillary morphology are significantly correlated with the morphology of crown and alveolar ridge crest in maxillary anterior region of Han-Chinese. Individuals with long-narrow crown, pronounced scalloped marginal gingiva and slender inter-dental papilla are susceptible to risk implant esthetics.

Alveolar Process ; diagnostic imaging ; Crowns ; Gingiva ; anatomy & histology ; Humans ; Incisor ; anatomy & histology ; Maxilla ; Radiography ; Tooth Crown ; anatomy & histology

Objective: To explore and analyze the correlation between labial gingival morphology and alveolar bone morphology of maxillary anterior teeth in patients with posterior dental implant, so as to provide reference basis for restoration design and esthetic reconstruction of anterior teeth. Methods: Sixty-four patients [24 males, 40 females (25.6±3.3) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to May 2021. According to the visibility of periodontal probe through gingival margin, the subjects were divided into thin and thick gingival biotypes, including 29 cases of thin biotype and 35 cases of thick biotype. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. Geomagic and Mimics software were used to measure and record the labial crown width and length, gingival papilla height, gingival angle, bone papilla height and bone margin angle of maxillary anterior teeth. Results: The crown width length ratios of maxillary central incisors, lateral incisors and canines were 0.85±0.08, 0.80±0.08 and 0.86±0.09 (F=10.71, P<0.01). The height of gingival papilla between maxillary central incisors, between central incisors and lateral incisors, between lateral incisors and canines were (3.93±0.86), (3.47±0.84) and (3.38±0.91) mm respectively (F=7.44, P<0.01), and the height of corresponding bone papilla were (3.44±0.88), (3.12±0.75) and (2.72±0.63) mm respectively (F=14.26, P<0.01). The gingival margin angles of maxillary central incisors, lateral incisors and canines were 88.3°±7.7°, 84.7°±8.9° and 81.2°±6.6° (F=13.15, P<0.01), and the bone margin angles were 103.2°±13.1°, 99.5°±11.2° and 110.6°±13.0° (F=13.25, P<0.01). The crown width length ratio (0.81±0.08), gingival margin angle (82.2°±7.4°) and bone margin angle (99.4°±12.9°) of thin gingival subjects were significantly lower than those of thick gingival subjects (0.85±0.09, 86.5°±8.6°, 108.5°±11.4°) (t=-2.79, 3.63, 5.20, P<0.01). The height of gingival papilla [(3.93±0.81) mm] and bone papilla [(3.43±0.80) mm] in thin gingival subjects were significantly lower than those in thick gingival subjects [(3.34±0.84) and (2.85±0.71) mm, respectively] (t=-4.89, -5.36, P<0.01). The height of labial gingival papilla of upper anterior teeth was positively correlated with that of bone papilla in all patients (r=0.66, P<0.01); the ratio of crown width to length of upper anterior teeth was positively correlated with the angle of bone margin (r=0.42, P<0.01); the height of anterior gingival papilla was negatively correlated with the angle of bone margin (r=-0.58, P<0.01), and the height of bone papilla was negatively correlated with the angle of bone margin (r=-0.82, P<0.01). Conclusions: The crown shape, gingival shape and alveolar bone shape of maxillary anterior teeth were different in different tooth positions. Patients with different periodontal phenotypes had different crown width length ratio, gingival papilla height, bone papilla height, gingival margin angle, and bone margin angle.
Adult ; Cone-Beam Computed Tomography ; Dental Implants ; Esthetics, Dental ; Female ; Gingiva/anatomy & histology* ; Humans ; Male ; Maxilla/diagnostic imaging* ; Tooth Crown ; Young Adult

Sarcomatoid carcinoma is a rare, malignant biphasic neoplasm with an epithelial and a spindle cell component. Primary sarcomatoid carcinomas arising from mandibular gingiva are known to be extremely rare, with only one case reported to date. Herein, we discuss the radiographic and computed tomographic appearances and pathological features of primary mandibular sarcomatoid carcinoma, which was confirmed by clinicopathology, in a 72-year-old man. In addition, we present a brief review of the relevant literature.
Aged ; Bone and Bones ; diagnostic imaging ; Carcinoma ; pathology ; Carcinoma, Small Cell ; pathology ; Carcinosarcoma ; pathology ; Gingiva ; pathology ; Gingival Neoplasms ; pathology ; Humans ; Male ; Mandibular Neoplasms ; pathology ; Sarcoma ; pathology ; Tomography, X-Ray Computed