Studying fibroblast isolated from normal gingival and overgrowth gingival to synthesize and refine recombination HIP on organ transplant patients, who were treated by cyclosporine A inhibitor, showed that recombinant human HIP in E. coli was refined with high clean level. HIP helps to inhibit the growth of fibroblast isolated from overgrowth gingival, antagonize with bFGF-induced proliferation. The study is shedding light on using HIP and HSPG in treatment of overgrowth gingival, a side effect of CsA and derivatives, to prevent patients from periodic gingival remove
Fibroblasts ; Gingiva

Periodontal tissue, especially the alveolar bone, are closely associated with the progress and efficacy of orthodontic treatment. Prior to and during orthodontic treatment, dentists should fully evaluate the status of periodontal hard tissues to prevent clinical problems. This article aims to discuss bone issues associated with orthodontic treatment, including gingival papilla absence, alveolar bone insufficiency, excessive cortical resistance, and altered passive eruption, etc. The mechanism and prevention methods of these problems are also described.
Gingiva ; Periodontium

In order to compare the accuracy of impression technique using the addition silicone putty and improved heavy body material, impression were taken for the natural 6 maxillary anterior teeth, and for the metal mast model that has full arch shape with 4 cylindrical abutment teeth, Marginal gingiva was retracted by routine method using retraction cord, and two techniques were tried to compare the length of impression materials in the gingival sulcus. This was aimed to see the effect of viscosity and hydraulic pressure of impression materials for the subgingival impression. Impressions for the full arch-shaped metal master model were taken to compare the linear stability of the different impression materials and their related techniques. The conclusions were as belows : 1. The one-step impression technique showed longer extension of impression material in gingival sulcus than two-step impression technique. 2. High viscosity and hydraulic pressure of impression material were useful to take subgingival impression. 3. There was no statistically significant difference for the two-dimensional accuracy of impression technique, but two-step technique showed better trend than one-step technique.
Gingiva ; Silicones ; Tooth ; Viscosity

Dental Care ; Gingiva ; Humans

Gingival smile is a condition that causes a cosmetic problem by revealing excessive upper gingivae when one smiles. We, herein, report a case of a successfully treated gingival smile by injection of botulinum toxin A to levator labii superioris alaque nasi muscle.
Botulinum Toxins* ; Gingiva

The midpalatal suture area and maxillary interdental area are suitable site for the placement of orthodontic mini-implant. The purpose of this study was to provide a guideline to indicate the best location for mini-implant placement as it relates to the thickness of soft tissue and cortical bone. Fifteen maxilla from 15 cadavers were cut in midsagittal plane and buccopalatal plane to measure the thickness of soft tissue and cortical bone of midpalatal and maxillary posterior interdental areas. Sectioned samples were scanned and the thickness was measured. The thickness of soft tissue and cortical bone were measured at 6 points from the interdental papilla with 5-mm intervals in the mid-sagittal section. And, the thickness of soft tissue and cortical bone were also measured at 5 points from the alveolar crest with 1-mm intervals in the buccopalatal section. The mean and standard deviation of the measurement were calculated. Soft tissue thickness at the midpalatal suture area was 1.46 mm at 15 mm from the interdental papilla and remained uniformly thick posterior to this point, and steeply increased at 35 mm area posteriorly. Cortical bone thickness were greatest (2.13 mm) at 20 mm from the interdental papilla and remained uniformly thick posterior to this point, and decreased at 30 mm area posteriorly. Palatal soft tissues thickness in all groups was thinnest at the 1 mm from the alveolar crest and gradually increased from alveolar crest to apical portion. Cortical bone thickness in all groups was thickest at the 1 mm from the alveolar crest and slightly decreased from alveolar crest to apical portion. Buccal soft tissue thickness in all groups was thickest at the 1 mm from the alveolar crest and gradually decreased from alveolar crest to apical portion. Cortical bone thickness in all groups was thinnest at the 1 mm from the alveolar crest and slightly increased from alveolar crest to apical portion. Soft tissue thicknesses were greater on the palatal side than on the buccal side. Cortical bone thicknesses of the buccal side were thicker than the palatal side. These results provide anatomical data of soft tissue and cortical bone thickness to assist in the determination of safe location for the mini-implant placement in the midpalatal and maxillary interdental areas.
Cadaver ; Gingiva ; Maxilla ; Sutures

PURPOSE: The purpose of this study was to propose and assess a shade guide for pink gingival aesthetics using a Spanish population sample. MATERIALS AND METHODS: The L*, C*, h, a* and b* coordinates of 259 participants were measured using a spectrophotometer in 3 standardized points along the attached gingiva of the maxillary central incisors. A hierarchical clustering analysis was applied to obtain separate solutions regarding the number of shade tabs. For each of the solutions obtained, color differences (ΔE*) were calculated using the CIELab and CIEDE2000 formulas, and the proposed shade guide was selected considering (1) the color differences between tabs and (2) the coverage error of each of the solutions. RESULTS: The proposed shade guide consisted of 8 gingival shade tabs and achieved CIELab and CIEDE2000 coverage errors of less than the respective 50:50% acceptability thresholds (ΔE*=4.6 units and ΔE₀₀=4.1). The coordinates for the various gingival shade tabs were as follows: Tab 1: L*43.3, a*21.9, b*12.3 (1.6); Tab 2: L*42.9, a*34.1, b*19.1; Tab 3: L*46.5, a*25.8, b*10.9; Tab 4: L*46.5, a*27.3, b*15.1; Tab 5: L*49.6, a*23.5, b*16.8; Tab 6: L*51.5, a*19.7, b*13.6; Tab 7: L*55.9, a*22.0, b* 15.0; and Tab 8: L*56.0, a*19.9, b*18.8. CONCLUSION: The CIELab and CIEDE2000 coverage errors for the 8 shade tabs of the proposed gingival shade guide were significantly lower than those of other guides. Therefore, despite the limitations of this study, the proposed guide is more appropriate for matching gingival shade in the Spanish general population.
Esthetics ; Gingiva ; Incisor

Hereditary gingival fibromatosis (HGF) is a familial hereditary disease; while it is rare and usually benign, it is also characterized by the slow and progressive development of gingival tissue. This paper reports on the clinical examina-tion and history of HGF in a family of patients.
Fibromatosis, Gingival ; Gingiva ; Humans

PURPOSE: This study examined the factors that can be associated with the appearance of the interproximal papilla. METHODS: One hundred and forty-seven healthy interproximal papillae between the maxillary central incisors were examined. For each subject, a digital photograph and periapical radiograph of the interdental embrasure were taken using a 1-mm grid metal piece. The following parameters were recorded: the amount of recession of the interproximal papilla, contact point-bone crest distance, contact point-cemento-enamel junction (CEJ) distance, CEJ-bone crest distance, inter-radicular distance, tooth shape, embrasure space size, interproximal contact area, gingival biotype, papilla height, and papilla tip form. RESULTS: The amount of recession of the interproximal papilla was associated with the following: 1) increase in contact point-bone crest, contact point-CEJ, and CEJ-bone crest distance; 2) increase in the inter-radicular distance; 3) triangular tooth shape; 4) decrease in the interproximal contact area length; 5) increase in the embrasure space size; and 6) flat papilla tip form. On the other hand, the amount of gingival recession was not associated with the gingival biotype or papilla height. In the triangular tooth shape, the contact point-bone crest distance and inter-radicular distance were longer, the interproximal contact area length was shorter, and the embrasure space size was larger. The papilla tip form became flatter with increasing inter-radicular distance and CEJ-bone crest distance. CONCLUSIONS: The relative position of the interproximal papilla in healthy subjects was associated with the multiple factors and each factor was related to the others. A triangular tooth shape carries a higher risk of recession of the interproximal papilla because the proximal contact point is positioned more incisally and the bone crest is positioned more apically. This results in an increase in recession of the interproximal papilla and flat papilla tip form.
Gingiva ; Gingival Recession ; Incisor ; Tooth

PURPOSE: The purpose of this study was to assess the relationship between gingival biotype and underlying crestal bone morphology in the maxillary anterior region. MATERIALS AND METHODS: The maxillary anterior teeth from 40 subjects (20 thin biotype, 20 thick biotype) with ages from 20 to 50 years were included in this study. All subjects had healthy gingiva in the maxillary anterior region and had no history of orthodontic treatment, periodontal treatment, or hyperplastic medication. Using the probe transparency method, the scalloped distance (SCD) between the contact point-bone crest and the midface-bone crest was measured for each maxillary anterior teeth of two groups. RESULT: The mean SCD was 3.00±0.21 mm in thin biotype and 2.81±0.20 mm in thick biotype. The SCD value in the thin biotype was statistically significantly greater than in the thick biotype (t=2.982, P<0.01). Comparing the degree of crestal bone scallop in each maxillary anterior teeth in the two groups, all six teeth in the thin biotype showed higher bone scallop than in the thick biotype. CONCLUSION: A simple procedure using a probe could to determine gingival biotype and to predict the underlying crestal bone morphology was introduced. This may be useful for effective treatment planning.
Gingiva ; Maxilla ; Methods ; Pectinidae ; Tooth