Purpose: The aim of this study was to evaluate the effects of four surface treatment methods to improve zirconia roughness and three types of resin cement on the shear bond strength (SBS). Materials and methods: A total of 120 zirconia blocks were randomly divided into four surface treatments: non-treatment (Control), airborne-particle abrasion (APA) with 50 μm Al2O3 (APA50), APA with 125 μm Al2O3(APA125), and ZrO2 slurry (ZA). Three resin cements (Panavia F 2.0, Superbond C&B, and Variolink N) were applied to the surface-treated zirconia specimens. All specimens were subjected to SBS testing using a universal testing machine. The surface of the representative specimens of each group was observed by scanning electron microscope (SEM). SBS data were analyzed with oneway ANOVA, two-way ANOVA test and post-hoc Tukey HSD Test (α=.05). Results: In the surface treatment method, APA125, APA50, ZA, and Control showed high shear bond strength in order, but there was no significant difference between APA125 and APA50 (P >.05). Also, ZA showed significantly higher shear bond strength than Control (P <.05). In the resin cement type, Panavia F 2.0, Superbond C&B, and Variolink N showed significantly higher shear bond strength in order (P <.05). In SEM images, the zirconia surfaces of the APA50 and APA125 showed quite rough and irregular shapes, and the zirconia surface of the ZA was observed small irregular porosity and rough surfaces. Conclusion APA and ZrO 2 slurry were enhanced the surface roughness of zirconia, and Panavia F 2.0 containing MDP showed the highest shear bond strength with zirconia.

Purpose: The aim of this study was to evaluate the effects of four surface treatment methods to improve zirconia roughness and three types of resin cement on the shear bond strength (SBS). Materials and methods: A total of 120 zirconia blocks were randomly divided into four surface treatments: non-treatment (Control), airborne-particle abrasion (APA) with 50 μm Al2O3 (APA50), APA with 125 μm Al2O3(APA125), and ZrO2 slurry (ZA). Three resin cements (Panavia F 2.0, Superbond C&B, and Variolink N) were applied to the surface-treated zirconia specimens. All specimens were subjected to SBS testing using a universal testing machine. The surface of the representative specimens of each group was observed by scanning electron microscope (SEM). SBS data were analyzed with oneway ANOVA, two-way ANOVA test and post-hoc Tukey HSD Test (α=.05). Results: In the surface treatment method, APA125, APA50, ZA, and Control showed high shear bond strength in order, but there was no significant difference between APA125 and APA50 (P >.05). Also, ZA showed significantly higher shear bond strength than Control (P <.05). In the resin cement type, Panavia F 2.0, Superbond C&B, and Variolink N showed significantly higher shear bond strength in order (P <.05). In SEM images, the zirconia surfaces of the APA50 and APA125 showed quite rough and irregular shapes, and the zirconia surface of the ZA was observed small irregular porosity and rough surfaces. Conclusion APA and ZrO 2 slurry were enhanced the surface roughness of zirconia, and Panavia F 2.0 containing MDP showed the highest shear bond strength with zirconia.

Benigh chorioangioma of the placent is the most common primary tumor of the placenta that similar to hamartoma. Most small sized tumor is not important because it is asymptomatic and not make any clinical problem, but large tumor more than 4 cm in diameter are clinically important, because that can make hydramnios, preterm labor, fetal hydrops, Disseminated intravascular coagulopathy, intrauterine growth retardation, preeclampsia, placenta abruptio, postpartum bleeding. In this respect, the predictional diagnosis and management of chorioangioma and its complication should be done. In this paper, a case of chorioangioma associated with hydramnios, preterm labor, IUGR that diagnosis by antepastun ultrasonography and postpartum histologic study is presented with the brief review of the literature related to this type of tumor.
Diagnosis ; Female ; Fetal Growth Retardation ; Hamartoma ; Hemangioma* ; Hemorrhage ; Hydrops Fetalis ; Obstetric Labor, Premature ; Placenta* ; Polyhydramnios ; Postpartum Period ; Pre-Eclampsia ; Pregnancy ; Ultrasonography

BACKGROUND: Microscopic examinations are usually performed to confirm urine sediments in samples flagged in automated urinalysis. The aim of this study was to analyze the review rates and the difference in urinalysis results according to review rules. METHODS: A total of 1,408 urine samples submitted for health screening were collected. The urine chemistry test and urine sediment test were performed using EikenUS 3100 (Eiken Chemical Co. Ltd., Japan) and Sysmex UF-1000i (Sysmex Co., Japan), respectively. We assessed the rate of agreement between the 2 analyses and the kappa values for white blood cells (WBCs) and red blood cells (RBCs). Microscopic examinations were performed for all cases of discordant results between the urine strip and automated sediment analysis, some cases of concordant results, and cases of albuminuria. RESULTS: The review rate was 14.3%. Microscopic examinations were additionally performed on 77 samples (77/1,207, 6.4%) including 29 and 56 samples flagged for WBCs and RBCs, respectively. Based on the results of microscopic examination, the false-positive and the false-negative results of the urine chemistry test and automatic sediment analysis were corrected. Among concordant results between two methods, a clinically significant number of false-negatives were identified (6 results of WBC detection [6/125, 4.8%] and 4 of RBC detection [4/145, 2.8%]). Among the 22 unflagged cases of albuminuria, pathologic casts were detected in 21 cases (21/22, 95.5%). CONCLUSIONS: Microscopic examination based on the combined results of the two analyses improved the quality of the test.
Albuminuria ; Chemistry ; Erythrocytes ; Flow Cytometry ; Leukocytes ; Mass Screening ; Microscopy ; Quality Improvement* ; Reagent Strips ; Urinalysis*

PURPOSE: This study was conducted to evaluate the effects of plasma treatment of sandblasted and acid-etched (SLA) titanium implants on surface cleansing and osseointegration in a beagle model. MATERIALS AND METHODS: For morphological analysis and XPS analysis, scanning electron microscope and x-ray photoelectron spectroscopy were used to analyze the surface topography and chemical compositions of implant before and after plasma treatment. For this animal experiment, twelve SLA titanium implants were divided into two groups:a control group (untreated implants) and a plasma group (implants treated with plasma). Each group was randomly located in the mandibular bone of the beagle dog (n = 6). After 8 weeks, the beagle dogs were sacrificed, and volumetric analysis and histometric analysis were performed within the region of interest. RESULTS: In morphological analysis, plasma treatment did not alter the implant surface topography or cause any physical damage. In XPS analysis, the atomic percentage of carbon at the inspection point before the plasma treatment was 34.09%. After the plasma treatment, it was reduced to 18.74%, indicating a 45% reduction in carbon. In volumetric analysis and histometric analysis, the plasma group exhibited relatively higher mean values for new bone volume (NBV), bone to implant contact (BIC), and inter-thread bone density (ITBD) compared to the control group. However, there was no significant difference between the two groups (P > .05). CONCLUSION Within the limits of this study, plasma treatment effectively eliminated hydrocarbons without changing the implant surface.

PURPOSE: The purpose of this study was to investigate changes in retention and wear pattern of Locator® and ADD-TOC attachments on a digital milled bar by performing chewing simulation and repeated insertion/removal of prostheses in fully edentulous models. MATERIALS AND METHODS: Locator (Locator®; Zest Anchors Inc., Escondido, CA, USA) was selected as the control group and ADD-TOC (ADDTOC; PNUAdd Co., Ltd., Busan, Republic of Korea) as the experimental group. A CAD-CAM milled bar was mounted on a master model and 3 threaded holes for connecting a bar attachment was formed using a tap. Locator and ADD-TOC attachments were then attached to the milled bar. Simulated mastication and repeated insertion/removal were performed over 400,000 cyclic loadings and 1,080insertions/removals, respectively. Wear patterns on deformed attachment were investigated by field emission scanning electron microscopy. RESULTS: For the ADD-TOC attachments, chewing simulation and repeated insertion/removal resulted in a mean initial retentive force of 24.43 ± 4.89 N, which were significantly lower than that of the Locator attachment, 34.33 ± 8.25 N (P < .05). Amounts of retention loss relative to baseline for the Locator and ADD-TOC attachments were 21.74 ± 7.07 and 8.98 ± 5.76 N (P < .05). CONCLUSION CAD-CAM milled bar with the ADD-TOC attachment had a lower initial retentive force than the Locator attachment. However, the ADD-TOC attachment might be suitable for long-term use as it showed less deformation and had a higher retentive force after simulated mastication and insertion/removal repetitions.

This study was performed to assist in the prediction of the clinical tolerance of patients with lung cancer to irradiation. MATERIALS AND METHODS: The changes in lung function of 26 patients with lung carcinomas, who had received radiation with curative intent, or postoperative adjuvant radiotherapy, were prospectively studied. Their pulmonary function tests were conducted at presentation, and then at 2 weeks, 2 months, and 6 months, following radiotherapy. RESULTS: When the parameters of postirradiation pulmonary functions (2 weeks, 2 months and 6 months) were compared with the preirradiation baseline data, there was a statistically significant decrease in FEF25~75% at 2 months, but the rest of the parameters showed no significant change following irradiation. However, when the baseline lung function was compared with the lung function at the lowest FVC, in patients with curative radiotherapy, there was a statistically significant decrease of about 10% in the FEV1 and DLCO. CONCLUSION: Preirradiation assessment of pulmonary functions, particularly the FEV1 and DLCO will be useful for the prediction of the clinical tolerance to irradiation.
Humans ; Lung Neoplasms* ; Lung* ; Prospective Studies ; Radiotherapy ; Radiotherapy, Adjuvant ; Respiratory Function Tests

BACKGROUND/AIMS: Obstructive jaundice is developed from the cholangiocarcinoma, biiliary tract stone, biliary benign stricture and pancreatic head cancer and is rapidly progress to cholangitis or sepsis. So early decompression, accurate diagnosis and treatment are very important. Percutaneous transhepatic choledocoscopy (PTCS) and endoscopic retrograde choledocoscopy (ERCS) have been used for evaluation of the obstructive jaundice. We performed, through the PTCS, electrohydraulic lithotripsy (EHL) for biliary tract stone rernoval, biopsy for diagnosis of biliary stric and self expandible metalic coil stent (EndocoilTM stent, Instent Co.) insertion on biliary stricture to evaluate the usefullness of PTCS in patients with obstructive jaundice. METHODS: Between Auguest 1994 and September 1995, PTCS was performed in 37 patients with obstructive jaundice. First, percutaneous transhepatic biliary drainage (PTBD) with 7Fr. drainage tube was done. Three days later, we exchainged the 7Fr. drainage tube with 16Fr.. Seven days later, through the PTCS, we performed EHL, biopsy and EndocoilTM stent insertion.
Biliary Tract ; Biopsy ; Cholangiocarcinoma ; Cholangitis ; Constriction, Pathologic ; Decompression ; Diagnosis ; Drainage ; Head and Neck Neoplasms ; Humans ; Jaundice, Obstructive ; Lithotripsy ; Sepsis ; Stents

Hyperkalemic periodic paralysis is characterized by episodic flaccid paralysis of the skeletal muscles due to an increase in serum potassium concentrations. Primary hyperkalemic periodic paralysis is caused by point mutations in SCN4A, encoding a voltage-gated skeletal muscle sodium channel. However, hyperkalemia-related diseases, such as renal failure, adrenal insufficiency, hypoaldosteronism, and chronic diuretic use, can induce secondary hyperkalemic periodic paralysis. Diagnosis of this disease is based on clinical features, nerve conduction studies, and a DNA sequence analysis. In cases of diagnostic uncertainty, a provocation test can be used to ensure the correct diagnosis. Here, we report a case of secondary hyperkalemic periodic paralysis with hyperkalemia that was induced by diabetic nephropathy, and review the relevant literature.
Adrenal Insufficiency ; Diabetic Nephropathies ; Dietary Sucrose ; Hyperkalemia ; Hypoaldosteronism ; Muscle, Skeletal ; Neural Conduction ; Paralysis ; Paralysis, Hyperkalemic Periodic ; Point Mutation ; Potassium ; Renal Insufficiency ; Sequence Analysis, DNA ; Sodium Channels ; Uncertainty

Poly-L-lysine (PLL) was reported to suppress mucin release from airway goblet cells during 30 min treatment period. In this study, we investigated whether PLL consistently suppresses mucin release from cultured airway goblet cells during 24 h after 30 min treatment and also specifically suppresses the release of mucin without any effects on the other releasable glycoproteins. Confluent primary hamster tracheal surface epithelial (HTSE) cells were metabolically radiolabeled with 3H-glucosamine for 24 h and chased for 30 min in the presence of varying concentrations of PLL to assess the effects on 3H-mucin release and on the total elution profile of the treated culture medium. The total mucin content during 24 h after 30 min treatment of PLL was assesed to investigate the consistency of effects. PLL did not affect the release of the other releasable glycoproteins whose molecular weights were less than mucin, and decreased the total mucin content during 24 h after 30 min treatment. We conclude that PLL can specifically suppress mucin release from cultured airway goblet cells and the suppression on mucin release is consistent. This finding suggests that PLL might be used as a specific airway mucin-regulating agent by directly acting on airway mucin-secreting cells.
Animals ; Cricetinae* ; Epithelial Cells* ; Equidae ; Glycoproteins ; Goblet Cells ; Molecular Weight ; Mucins*