The reamer crack, followed by breakage at its distal part occurred during intramedullary nailing of tibial shaft fracture. The broken reamer was trapped in the intramedullary canal, making it very difficult to pull out. We successfully extracted the broken reamer by retrograde impaction through the fracture site and completed intramedullary nailing procedure. Thus, we present this case with a review of the literature.
Fracture Fixation, Intramedullary ; Tibia*

Endcap placement after intramedullary nailing can be cumbersome. Misplacement of the endcap which may be difficult to extract may occur. In this report, a simple Kirschner wire device with 'fish-hook' technique may ease the procedure without further violating bony or soft tissues.
Fracture Fixation, Intramedullary* ; Tibia*

No abstract available.
Fracture Fixation, Intramedullary

No abstract available.
Fracture Fixation, Intramedullary

No abstract available.
Fracture Fixation, Intramedullary

To study the development of distraction at the fracture site according to inaccurate insertion of the distal screw in treatment of femoral shaft fracture with interlocking intramedullary nail, we prepared 24 femoral bone model, fixed them with interlocking intramedullary nails after artificially making transverse fracture or spiral fracture at mid 1/3 of femoral shaft and distal 1/3 of femoral shaft. The cephalocaudal insertion angles of the distal screws ranged from 5.2 to 45.4. As the insertion angles increased, the distances between the fractured sites ranged from 0.1 to 8.2mm. Distractions splited more than 5mm were seen in the average insertion angle of 34.3+/-9.4 (28.2 -45.4 ). When the insertion was made few millimeter proximal from the center of the distal screw hole, which was parallel to the transverse section of the femur model, fracture distraction ranged from minimum 1.8mm to maximum 5.0mm. In conclusion, the cephalocaudal insertion angle or location of the distal screw can be reason for the distraction between the fractured sites in internal fixation with intramedullary nail in long bone like femur. To prevent the distraction of fractured site, it is important to make the insertion of the distal screw parallel to the transverse section of the femur and to insert into the center of the screw hole.
Femur ; Fracture Fixation, Intramedullary*

No abstract available.
Fracture Fixation, Intramedullary*

No abstract available.
Fracture Fixation, Intramedullary*

No abstract available.
Fracture Fixation, Intramedullary*

No abstract available.
Fracture Fixation, Intramedullary*