OBJECTIVETo develop a HPCE analysis method for fingerprints of Forsythia suspensa from Hebei province, get reference fingerprint and compare the fingerprints of F. suspensa collected from different producing areas and different parts of the plant.

METHODElectrophoresis was performed on a fused silica capillary column (75 microm x 60 cm, 30 cm). The running buffer was composed of 50 mmol x L(-1) borax (adjust to pH 9.90 with 0.1 mol x L(-1) NaOH). The applied voltage was 15 kV and the temperature was 20 degrees C. The detection wavelength was 214 nm. The semblances to the crude drugs of different producing areas were compared.

RESULTThe mutual mode of HPCE fingerprints was set up with 12 common peaks. The fingerprints of F. suspensa from Hebei province had high similarity, F. suspensa from Shanxi and Henan were also of good quality. The chemical composition in different parts of the herb had big differences.

CONCLUSIONThe method is simple, quick, accurate and can be used as a new means for the quality control of F. suspensa.

PURPOSE: Limited data is available regarding the differences for possible microleakage problems and fitting accuracy of zirconia versus titanium abutments with various connection designs. The purpose of this in vitro study was to investigate the effect of connection design and abutment material on the sealing capability and fitting accuracy of abutments. MATERIALS AND METHODS: A total of 42 abutments with different connection designs [internal conical (IC), internal tri-channel (IT), and external hexagonal (EH)] and abutment materials [titanium (Ti) and zirconia (Zr)] were evaluated. The inner parts of implants were inoculated with 0.7 µL of polymicrobial culture (P. gingivalis, T. forsythia, T. denticola and F. nucleatum) and connected with their respective abutments under sterile conditions. The penetration of bacteria into the surrounding media was assessed by the visual evaluation of turbidity at each time point and the number of colony forming units (CFUs) was counted. The marginal gap at the implant- abutment interface (IAI) was measured by scanning electron microscope. The data sets were statistically analyzed using Kruskal-Wallis followed by Mann-Whitney U tests with the Bonferroni-Holm correction (α=.05). RESULTS: Statistically significant difference was found among the groups based on the results of leaked colonies (P<.05). The EH-Ti group characterized by an external hexagonal connection were less resistant to bacterial leakage than the groups EH-Zr, IT-Zr, IT-Ti, IC-Zr, and IC-Ti (P<.05). The marginal misfit (in µm) of the groups were in the range of 2.7–4.0 (IC-Zr), 1.8–5.3 (IC-Ti), 6.5–17.1 (IT-Zr), 5.4–12.0 (IT-Ti), 16.8–22.7 (EH-Zr), and 10.3–15.4 (EH-Ti). CONCLUSION: The sealing capability and marginal fit of abutments were affected by the type of abutment material and connection design.
Bacteria ; Dataset ; Dental Implants ; Forsythia ; In Vitro Techniques ; Stem Cells ; Titanium

Forsythiae Fructus is the dried fruit of Forsythia suspensa and the volatile compounds are its main bioactive components. According to the different harvest periods, F. suspensa can be divided into Qingqiao(mature F. suspensa) and Laoqiao(ripe F. suspensa). To investigate dynamic changes of volatile components in Qingqiao and Laoqiao samples collected at different periods, the present study extracted and analyzed the total volatile oils in Qingqiao and Laoqiao samples(four harvest periods for Qingqiao and two for Laoqiao) by steam distillation method. The results indicated that the content of volatile oils in F. suspensa samples at different harvest periods was significantly different. The content of volatile oils in Qingqiao samples(except those harvested in the first period) was higher than that of Laoqiao, and the content of volatile oils in both Qingqiao and Laoqiao increased with the harvest period. Furthermore, volatile compounds in F. suspensa were qualitatively analyzed by the gas chromatography-mass spectrometry(GC-MS), and 28 volatile compounds were identified. Chemometrics analyses including principal component analysis(PCA) and partial least squares discriminant analysis(PLS-DA) were further applied to explore differential markers and dynamic changes of volatile components in Qingqiao and Laoqiao samples at different harvest periods. Finally, four volatile compounds, including α-pinene, sabinene, β-pinene, and 4-terpenol were selected as potential differential markers. The relative content of α-pinene and 4-terpenol was consistent with that of total volatile oils in the changing trend.
Chemometrics ; Forsythia ; Fruit ; Gas Chromatography-Mass Spectrometry ; Oils, Volatile

Most oral microorganisms exist as biofilms which initiate formation via the attachment of an early colonizer to host proteins on the tooth surface. Fusobacterium nucleatum act as a bridge between early and late colonizers. Dental biofilms eventually comprise dental pathogens such as Porphyromonas gingivalis, Treponema denticola and Tannerella forsythia. To evaluate the effects of mutual interactions between oral bacteria on the growth of biofilms, periodontopathogens were co-cultured with a 0.4 microm barrier. Streptococcus gordonii inhibited the growth of F. nucleatum and periodontopathogens. However, F. nucleatum, P. gingivalis and T. denticola activated the growth of other bacteria. A co-culture system of early and late colonizers could be a useful tool to further understand bacterial interactions during the development of dental biofilm.
Bacteria ; Biofilms ; Coculture Techniques ; Colon ; Forsythia ; Fusobacterium nucleatum ; Porphyromonas gingivalis ; Proteins ; Streptococcus gordonii ; Tooth ; Treponema denticola

OBJECTIVETo develop a quantitative determination of Forsythia suspensa and to provide scientific basis for its quality control.

METHODBy HPLC, the separation was performed on a Zorebax Eclipse XDB-C18 column (4.6 mm x 250 mm, 5 microm) at 25 degrees C using a isocratic elution of acetonitrile-water (containing 0.4% glacial acetic acid, 15:85). The detection wavelength was 330 nm.

RESULTThe calibration curve showed a good linearity (r = 0.9998) within test range of 0.202-1.515 microg. And the average recovery was 98.54% with RSD 1.1%. The content range of forsythoside A in 11 batches of Forsythiae Fructus was 0.200%-1.681%.

CONCLUSIONThe developed method is simple, accurate, specific, and with good repeatability. It is suitable for quality evaluation of Forsythiae Fructus.

Dental plaque, a biofilm consisting of more than 500 different bacterial species, is an etiological agent of human periodontal disease. It is therefore important to characterize interactions among periodontopathic microorganisms in order to understand the microbial pathogenesis of periodontal disease. Previous data have suggested a synergistic effect of tow major periodontal pathogens Porphyromonas gingivalis and Tannerella forsythia in the periodontal lesion. In the present study, to better understand interaction between P. gingivalis and T. forsythia, the coaggregation activity between these bacteria was characterized. The coaggregation activity was observed by a direct visual assay by mixing equal amount (1 x 10(9)) of T. forsythia and P. gingivalis cells. It was found that the first aggregates began to appear after 5-10 min, and that the large aggregates completely settled within 1 h. Electron and epifluorescence microscopic studies confirmed cell-cell contact between two bacteria. The heat treatment of P. gingivalis completely blocked the activity, suggesting an involvement of a heat-labile component of P. gingivalis in the interaction. On the other hand, heat treatment of T. forsythia significantly increased the coaggregation activity; the aggregates began to appear immediately. The coaggregation activity was inhibited by addition of protease, however carbohydrates did not inhibit the activity, suggesting that coaggregation is a protein-protein interaction. The results of this study suggest that coaggregation between P. gingivalis and T. forsythia is a result of cell-cell physical contact, and that coaggregation is mediated by a heat-labile component of P. gingivalis and T. forsythia component that can be activated on heat treatment.
Bacteria ; Biofilms ; Carbohydrates ; Dental Plaque ; Forsythia* ; Hand ; Hot Temperature ; Humans ; Periodontal Diseases ; Porphyromonas gingivalis* ; Porphyromonas*

OBJECTIVEDetermine the content of forsythoside A in fructus forsythiae by combining near-infrared spectroscopy with the chemometrics method.

METHODHPLC was used as a reference method to determine the content of forsythoside A in fructus forsythiae. Multivariate calibration model based on PLS algorithm was developed to correlate the spectra and the corresponding values determined by the reference method.

RESULTRMSECV (root-mean-square error of cross-validation) of the model for forsythoside A was 0.221 and the correlation coefficients of the calibration model was 0.969. External validation with external validation samples proved that the relative coefficient of the predicted value and the HPLC value was 0.961 and the RMSEP was 0.18.

CONCLUSIONNIRS can be used in the determination of forsythoside A, which sets up the foundation of product-line control of fructus forsythiae.

OBJECTIVETo examine the in vitro dissolution of forsythin in Forsythia suspensa powder of different particle diameter, in order to give guidance to the grinding process.

METHODHPLC was used to determine the in vitro dissolution quantity and dissolution velocity of forsythin coarse powder, fine powder and ultramicroscopic powder.

RESULTThe dissolution curves of Forsythia suspensa coarse powder, fine powder and ultramicroscopic powder were basically inconformity to Weibull distribution. Specifically, T50 was 11.8, 10.5 and 6.8 min, respectively, and Q45 was 78.22%, 81.91% and 90.76%, respectively.

CONCLUSIONThe superfine milling process can significantly increase the dissolution quantity and dissolution velocity of forsythin.

Phytochemical investigation on Forsythia suspensa (Thunb.) Vahl afforded ten compounds, including five lignan glycosides and five phenylethanoid glycosides. The compounds were isolated by using HP-20 macroporous resin, silica gel, octadecyl silica gel (ODS), size exclusion chromatography resin HW-40 chromatography, and preparative HPLC. The structures were established through application of extensive spectroscopic methods, including ESI-MS, 1D-and 2D-NMR spectroscopy. They were identified as forsythialanside E (1), 8'-hydroxypinoresinol-4'-O-β-D-glucoside (2), 8'-hydroxypinoresinol (3), lariciresinol-4'-O-β-D-glucoside (4), lariciresinol-4-O-β-D-glucoside (5), forsythoside H (6), forsythoside I (7), forsythoside F (8), plantainoside B (9), and plantainoside A (10). Compound 1 was a new lignan glycoside.
Forsythia ; chemistry ; Glycosides ; chemistry ; isolation & purification ; Lignans ; chemistry ; isolation & purification ; Molecular Structure ; Plant Extracts ; chemistry

The analysis of Forsythia suspensa was performed on Waters Symmetry C₁₈ column( 4. 6 mm×250 mm,5 μm) and mobile phase was methanol( A)-0. 1% formic acid aqueous solution( B) with the elution gradient. Column temperature was maintained at 30℃,and the flow rate was 1. 0 m L·min^-1 with detection wavelength 265 nm. The HPLC-PDA fingerprint of F. suspensa was optimized.Chemical constituents in F. suspensa were analyzed by UFLC-Q-TOF-MS in positive and negative ion mode. The quality of 48 batches of F. suspensa from different habitats,processing methods and specifications was evaluated by similarity evaluation and cluster analysis.The 18 common peaks were confirmed. The similarity of F. suspensa from different habitats was more than 0. 98,and 56 chemical constituents were identified. Different processing methods had great influence on the quality of F. suspensa. Compared with boiled and direct drying,the quality of F. suspensa processed by sun-drying was obviously decreased. The similarity was about 0. 58. Different specifications of F. suspensa also had obvious distinction,and the similarity was about 0. 78. The effective components of grown F. suspensa,such as forsythoside A and phillyrin,were significantly reduced. The results of cluster analysis were basically consistent with the results of similarity evaluation. The establishment of fingerprint and the recognition of chemical pattern of F. suspensa can provide a more comprehensive reference for the quality control of herbs.
Chromatography, High Pressure Liquid ; Drugs, Chinese Herbal/chemistry* ; Forsythia/chemistry* ; Quality Control