Objective To investigate the feasibility and efficacy of combinational acetabular quadrilateral surface plates in treating elderly patients with acetabular fractures.Methods A retrospective case series study was conducted on the clinical data of eight elderly patients with acetabular fractures admitted between August 2016 and June 2017.There were five males and three females,with an average age of 64.2 years (range,60-68 years).According to the Letournel-Judet's classification,there were four patients with both column fractures,two T-shaped fractures,two anterior column and posterior hemitransverse fractures,among which three were combined with posterior wall fractures.Before operation,the artificial pelvis model was prepared by 3D printing for simulating the placement of combinational plates in the quadrilateral surface,and the plates were shaped for operation use.During operation,through the high iliac inguinal approach,the infrapectineal plate,pubo-ischiatic plate,and ilio-ischiatic plate were placed successively to fix anterior column," middle column",and posterior column,respectively.The pubo-ischiatic and ilio-ischiatic plates were combined with the infrapectineal plate.After fracture reduction,internal fixation was completed at one time.The incision length,operation time,and intraoperative blood loss were recorded.Postoperative fracture reduction was evaluated by Matta standard,and function of hip joint by modified Merle d'Aubigné and Postel scoring system.The complications were recorded.Results All the patients were followed up for 3 12 months (mean,6.8 months).The average incision length was 10 cm (range,8-12 cm).The average operation time was 130 min (range,100-180 min).The average blood loss was 600 ml (range,350-1 000 ml).According to the Matta standard,six patients got excellent result,one good,and one fair,with an excellent and good rate of 7/8.With respect to the hip joint function at the last follow up,the result was excellent in four patients,good in two,fair in one and bad in one,with an excellent and good rate of 6/8.No iatrogenic vascular injury,inguinal hernia or pulmonary embolism occurred during operation.No traumatic arthritis or avascular necrosis of femoral head occurred after operation.Conclusions The fixation from inside to outside by using combinational quadrilateral surface plates is in accordance with the biomechanical characteristics of hip joint,which enables better function recovery,especially for elderly patients with acetabular fractures involving quadrilateral surface.Combined with 3D printing technique for preoperative planning,it can reduce operation time,blood loss and postoperative complications.

Objective To explore the clinical effectiveness and reliability of combined acetabular quadrilateral surface plates for the treatment of both column fractures.Methods From June 2016 to August 2017,data of 15 cases with acetabular both column fractures who were treated in our department were retrospectively analyzed.Among them 9 cases were male and 6 were female.The mean age was 42.8 years (range,26-68 years).All cases were both column fractures according to the LetournelJudet's classification,including 4 cases combined with posterior wall fracture.Before operation,the pelvic CT thin layer scanning data of patients were collected in DICOM format,and then the data were imported to print the simulated model by 3D printing technology in order to understand the characteristics of fracture directly.The contralateral half pelvis was mirror printed in order to simulate the placement of combined quadrilateral surface plates and preshape all plates.During operation,infrapectineal main plate,pubo-ischiatic plate and ilio-ischiatic plate were placed consequently to fix the anterior column,"middle column" and posterior column respectively.The pubo-ischiatic and ilio-ischiatic plates were combined with the main plate.All cases were operated by supra-ilioinguinal approach.Results The average incision length was 11 cm (range,9-13 cm).The average operative time was 150 min (range,100-240 min).The average blood loss was 850 ml (range,600-1500 ml).Once reduction was obtained,plates could be placed easily and adhere to bone surface well.The quality of postoperative fracture reduction was evaluated according to Matta standard,of which there were 9 cases excellent,4 cases good,and 2 cases poor,with an excellent rate of 86.7％ (13/15).All patients were followed up for an average time of 10 months (range,6-12 months).At the latest follow-up,the average modified Merle d'Aubigne and Postel score was 16.4 (range,12-18),and there were 8 cases excellent,4 cases good,2 cases fair and 1 case poor,with an excellent rate of 80.0％ (12/15).Conclusion For the treatment of acetabular both column fractures,the combined quadrilateral surface plates could resist the medial displacement of quadrilateral area,and on the other hand the total floating posterior column and ischium could be fixed firmly.At the same time,this plate system is a multi-dimensional framework fixation,which is more effective and safer with lower complications rate,resulting in a satisfactory clinical outcomes.

Objective:To investigate the advantages and disadvantages and clinical effects of integrated acetabular quadrilateral surface buttress plate in the treatment of acetabular both column fractures.Methods:From September 2017 to March 2019, 14 patients with acetabular both column fractures were treated with integrated quadrilateral acetabular buttress plate and were followed up. The clinical data were retrospectively analyzed. There were 10 males and 4 females with an average age of 53.2 years (range, 26-75 years). Fracture classification were both column fractures according to the Letournel-Judet classification system, including 11 cases of combined posterior wall without posterior dislocation. The time from injury to operation was 8-19 days, with an average of 10.3 days. All operations were performed with a supra-ilioinguinal approach. After satisfactory reduction, the integrated acetabular quadrilateral surface buttress plate was used to fix the anterior and posterior column and quadrilateral fractures at the same time. After operation, Matta criteria was used to evaluate the quality of fracture reduction on postoperative images, and modified Merle d'Aubigné-Postel score to evaluate hip joint function.Results:The average operation time was 180 min (range, 120-320 min), and the intraoperative average blood loss was 980 ml (range, 700-1 600 ml). Operations were performed successfully with none intraoperative reshaping conducted, and the plate could fit into the bone surface well. All 14 patients were followed up with an average of 15.6 months (range, 9-20 months). During the follow-up, all fractures healed with an average of 3 months (range, 2.5-5 months). The reduction quality evaluated by the Matta criteria were 7 anatomical, 5 satisfactory, and 2 unsatisfactory, with an excellent and good rate of 85.7% (12/14). The hip joint function at the last follow-up was in accordance with the modified Merle d'Aubigné-Postel score was 12-18 points, with an average of 16.9 points, of which 8 excellent, 4 good, and 2 fair. The excellent and good function rate was 85.7% (12/14). During the operation, 1 patient had a rupture of about 1 cm of the peritoneum during the separation of the spermatic cord, which was immediately sutured and repaired. One patient had obturator nerve paralysis after the operation, without special treatment, and the paralysis symptoms were relieved during the 6th-month follow-up. There were no other operation-related complications.Conclusion:For both-column fractures characterized by central dislocation of the femoral head, the integrated acetabular quadrilateral buttress plate can simultaneously fix the anterior and posterior columns and quadrilateral surface at the same time. Satisfactory reduction and functional outcomes could be achieved by the novel plates.

Objective To evaluate the efficacy and safety of 3D printing patient-specific external guide template in assisting minimally invasive screwing for treatment of pelvic and acetabular fractures.Methods The clinical and follow-up data of 39 pelvic or acetabular fractures were retrospectively analyzed which had been treated from June 2016 to February 2018 at Department of Orthopaedics,Wuhan Union Hospital.The patients were divided into a template group and a freehand group.In the template group,there were 14 men and 7 women with an age of 46.3 ± 18.2 years and 17 pelvic fractures and 4 acetabular fractures;in the freehand group,there were 12 men and 6 women with an age of 43.8 ± 12.2 years and 14 pelvic fractures and 4 acetabular fractures.The 2 groups were compared in terms of operation time,fluoroscopic frequency,guide wire adjustments,fracture reduction,screw penetration rate,function evaluation and adverse events.Results All the 39 patients were followed up for 9 to 13 months (average,11.6 months).A total of 42 screws were placed in the template group and 35 screws in the freehand group.The values of operation time (43.8 ± 22.2 min),fluoroscopic frequency (29.6 ± 10.7 times) and guide wire adjustments (1.8 ± 1.2 times) in the external guide template group were all significantly lower than those in the freehand group (73.8 ±22.6 min,54.6 ± 16.5 times and 9.8 ±2.8 times,respectively) (P ＜0.05).There were no significant differences between the 2 groups in screw penetration rate,rate of satisfactory reduction,Majeed scores for pelvic function or modified Merle d'Aubigné scores at the last follow-ups (P ＞ 0.05).One case in the freehand group experienced numbness after operation on unilateral dorsi pedis which disappeared at 3-month follow-up.Conclusion The 3D printing patient-specific external guide template can reduce fluoroscopic frequency,save operation time and improve accuracy of screw insertion,providing a new means for minimally invasive treatment of pelvis and acetabular fractures.

Objective:To introduce a novel anatomical supra-pectineal quadrilateral surface buttress plate, and explore its advantages, disadvantages and clinical efficacy in the treatment of complex acetabular fractures.Methods:Data of eighteen cases of acetabular fractures treated in our department from March 2017 to March 2019were retrospectively analyzed. There were 15 males and 3 females with an average age of 49.6 years (range, 27-62 years). According to the Letournel-Judet’s classification, there were 3 cases of anterior column fractures (involving quadrilateral surface), 2 cases of "T" shaped, 8 of cases anterior column and posterior hemi-transverse (ACPHT) and 5 cases of double columns fractures. The time from injury to operation was 5-14 days (mean, 7 days). Before operation, all patients were taken pelvic anterior-posterior X-ray and CT scan. All patients were adopted supra-ilioinguinal approach and fixed by supra-pectineal quadrilateral surface buttress plate. Surgical time, intraoperative blood loss and postoperative complications were collected. After operations all patients were taken pelvic X-ray in anterior-posterior and Judet position, as well as CT scan. The radiographic quality of reduction was evaluated by Matta criteria and hip functions were evaluated by Matta Modified Merle d’Aubigné-Postel scoring system.Results:The average surgical time was 130 min (range, 100-200 min). The average blood loss was 560 ml (range, 400-900 ml). An additional shaping was unnecessary in 18 patients who were implanted with the anatomical supra-pectineal quadrilateral surface buttress plate and all patients were operated successfully. All patients were followed up for an average time of 9 months (range, 6-15 months). The quality of fracture reduction was evaluated according to Matta standard, of which there were 11 cases excellent, 4 cases good, and 3 cases poor, with an excellent rate of 83.3% (15/18). At the latest follow-up, the function of the hip joint was evaluated according to the Matta Modified Merle d’Aubigné-Postel scoring system for a mean of 15.8 scores (range, 12-18 scores), of which there were 10 cases excellent, 6 cases good, 2 cases fair, with an excellent rate of 88.9% (16/18). All patients recovered well, and there were 2 cases of lateral femoral cutaneous nerve injury postoperative who had recovered one month later. There was no other postoperative complications.Conclusion:The anterior and posterior column and quadrilateral surface could be stabilized simultaneously by the anatomical supra-pectineal quadrilateral surface buttress plate without intraoperative shaping. Moreover, it is more likely to obtain a satisfactory clinical outcome by using this special plate with lower complications and rigid fixation. Therefore, it is a kind of internal fixation method worthy of promotion in the treatment of complex acetabular fractures.

Objective:To summarize the clinical characteristics and prognosis of acute hyperextension spinal cord injury (SCI) in children, and to provide some recommendations for the treatment and prevention of this disease.Methods:Reviewed the data of children of SCI after sustained or repeated hyperextension of the spine at Wuhan Union Hospital and Wuhan Children's Hospital from September 2010 to September 2020. According to the American Spinal Injury Association impairment scale (AIS grade), the patients were divided into complete SCI group and incomplete SCI group. The age, symptoms and evolution after injury, neurological level of injury, imaging data, laboratory examination data, prognosis and complications of the two groups were analyzed. Retrospectively summarize the characteristics of this type of injury.Results:Forty-four cases of acute hyperextension SCI in children were included. Their age ranged from 3 to 10 years old, 95% of them were under 8 years old and 95% of them were female. There was no significant difference in age at injury and time of dance training between children with complete SCI and incomplete SCI. Back and leg pain, lower limb weakness or paresthesia, and rapidly progress to complete or incomplete SCI in a short period were typical symptoms. All blood test results anddiagnostic analysis of cerebrospinal fluid were unremarkable or negative. There was no fracture or dislocation in the whole spine. Magnetic resonance imaging showed a longitudinally extended intramedullary high-intensity signal in the thoracolumbar spinal cord. Complete SCI accounted for 60% of all cases, and the prognosis was poor with spinal cord atrophy and various complications.Conclusion:Children younger than 10 years old after sustained or repeated hyperextension of the spine may suffer acute hyperextension SCI. Children with complete SCI have poor prognosis and serious complications. Therefore, prevention of this type of injury is the best strategy.

Objective: To explore the clinical efficacy of combined plates through superior-ilioinguinal approach for acetabular fractures involving anterior wall and anterior column. Methods: Data of twelve patients with acetabular fractures involving anterior column and anterior wall who were treated by combined plates from June 2015 to August 2017 were retrospectively analyzed. Among them 9 cases were males and 3 cases were females, with an average age of 55.4 years old (range, 22-69 years old). Three cases were combined with posterior hemitransverse fractures. Six cases were combined with posterior column fractures. The mean time from injury to operation was 7.2 d (range, 5-12 d). Simultaneous management of anterior wall and anterior column fractures were achieved through single superior-ilioinguinal approach using the novel combined plates in all patients. The image results were evaluated by Matta’s standard and the functional outcome was evaluated by the Matta's improved Merle d'Aubigné-Postel scores system at the final follow-up. Results: All 12 patients were followed up for average 18.3 months (range, 12-24 months). Average blood loss was 560 ml (range, 200-1 200 ml) and average operative time was 102 min (range, 88-190 min). The mean time of bony union was 2.9 months (range, 2.5-4.5 months). The quality of postoperative fracture reduction was evaluated according to Matta’s standard, of which there were 7 cases anatomic, 3 cases satisfactory, and 2 cases unsatisfactory, with an anatomic or satisfactory rate of 83.3%(10/12). The average Matta’s improved Merle d’Aubigne-Postel score was 16.1 (range, 12-18), and there were 8 cases excellent, 2 cases good, 1 case fair and 1 case poor, with an excellent or good rate of 83.3%(10/12). Rupture of the peritoneum occurred in one patient during the surgery which was repaired immediately. One patient suffered obturator nerve palsy and was fully recovered in one year. No inguinal hernia, surgical site infection and femoral head avascular necrosis occurred. Conclusion The combined plates could provide simultaneous fixation for anterior column and anterior wall fractures firmly through single superior-ilioinguinal approach. Satisfactory reduction and functional outcomes could be achieved by the novel plates.