ObjectiveTo characterize the quality differences among different germplasm and introduced varieties of Bupleurum scorzonerifolium roots（BSR）， and explore the underlying molecular mechanisms， providing a basis for high-quality production and quality control. MethodsWild BSR from Yulin（YLW） served as the quality reference， we conducted comparative analysis among YLW， locally domesticated wild germplasm in Yulin（YLC3）， Daqing germplasm introduced and cultivated in Yulin（YLDQC3）， and locally cultivated germplasm in Daqing（DQC3）. A combination of traditional pharmacognostic methods and modern multi-omics analyses was employed， including macroscopic traits（appearance， odor）， microscopic features（proportions of cork， phloem， xylem）， cell wall component contents（hemicellulose， cellulose， lignin）， carbohydrate contents（starch， water-soluble polysaccharides）， marker compound contents（ethanol-soluble extracts， total saponins， liposoluble extracts， and saikosaponins A， B₂， C， D）， metabolomics， and transcriptomics， in order to systematically characterize quality differences and investigate molecular mechanisms among these samples. ResultsMacroscopically， Yulin-produced BSR（YLW， YLC3， YLDQC3） exhibited significantly greater weight， length， and upper and middle diameters than Daqing-produced BSR（DQC3）. Odor-wise， YLW and YLC3 had a a fragrance taste， YLDQC3 had a rancid oil odor， and DQC3 had a sweet and fragrant taste. Microscopically， Yulin germplasm（YLW， YLC3） and Daqing germplasm（YLDQC3， DQC3） shared similar structural features， respectively. However， Yulin germplasm showed significantly higher proportions of cork and phloem， as well as stronger xylem vessel staining intensity compared to Daqing germplasm. Regarding various component contents， Yulin germplasm contained significantly higher levels of ethanol-soluble extracts， total saponins， and saikosaponins A， B₂， C， D， while Daqing germplasm had significantly higher levels of hemicellulose， starch， and liposoluble extracts. After introduction to Yulin， the Daqing germplasm（YLDQC3） showed increased starch， water-soluble polysaccharides and liposoluble extracts contents， decreased cell wall component content， but no significant difference in other component contents. Metabolomics revealed that saponins and terpenes accumulated significantly in Yulin germplasm， while alcohols and aldehydes accumulated predominantly in Daqing germplasm. Transcriptomics indicated similar gene expression patterns within the same germplasm but specificity between different germplasms. Integrative metabolomic-transcriptomic analysis identified 145 potential key genes associated with the saikosaponin biosynthesis pathway， including one acetyl-coenzyme A（CoA） acetyltransferase gene（ACAT）， one 3-hydroxy-3-methylglutaryl-coenzyme A synthase gene（HMGS）， two hydroxymethylglutaryl-CoA（HMG-CoA） reductase genes（HMG）， one phosphomevalonate kinase gene（PMK）， one 1-deoxy-D-xylose-5-phosphate synthase gene（CLA）， one hydroxymethylbuten-1-aldol synthase gene（HDR）， two farnesyl pyrophosphate synthase genes（FPPS）， one squalene synthase gene（SQS）， one β-amyrin synthase gene（BAS）， 102 cytochrome P450（CYP450） gene family members， and 32 uridine diphosphate-glucuronosyltransferase（UGT） gene family members. ConclusionAmong the three cultivated types， YLC3 most closely resembles YLW in appearance， microscopic features， contents of major bioactive constituents， metabolomic and transcriptomic profiles. Yulin germplasm exhibits superior saponin synthesis capability compared to Daqing germplasm， and Yulin region is more suitable for the growth of B. scorzonerifolium. Based on these findings， it is recommended that artificial cultivation in northern Shaanxi and similar regions utilize the local Yulin germplasm source cultivated for at least three years.

Objective: To compare the effects of height-desk-chair matching on the viewing distance of primary school students before and after intervention, so as to provide scientific basis for the hygiene management of desks and chairs. Methods: From April to June 2025, a random cluster sampling method was used to select 141 third grade students from three classes equipped with adjustable desks and chairs in a primary school in Hefei City for a height-desk-chair matching intervention study. The height of students desks and chairs was adjusted according to the standard height and height range specified in the Functional Sizes and Technical Requirements of Chairs and Tables for Educational Institutions (GB/T 3976-2014), with an intervention period of one week. Before and after the intervention, eye use data were measured by using the electronic smart device "Cloud Clip", while collecting data on vision data viewing distance, time spent using eyes at close range and outdoor time, desk and chair height, and physical examination. Linear regression analysis was used to investigate the factors related to viewing distance before the intervention of height-desk-chair matching, and a paired t-test was used to analyze the difference in viewing distance before and after the intervention. A mixed effects model was used to explore the effect of height desk and chair adaptation intervention on viewing distance. Results: The compliance rates for desk and chair adjustments before and after the intervention were 1.4% and 18.4%, respectively, with a statistically significant difference ( χ 2=22.84, P <0.01). The viewing distance increased from (30.48±5.01) cm before intervention to (32.06±5.75) cm post intervention, with a statistically significant difference ( t=4.57, P <0.01). The proportion of students meeting the viewing distance standard increased from 33.3% to 51.1%. The linear mixedeffects model results indicated that the association between height appropriate desk and chair interventions and viewing distance was statistically significant, regardless of whether covariates such as time spent using eyes at close range and outdoor time were adjusted ( β=-1.58, 95%CI = -2.25 to -0.91; β=-1.14, 95%CI =-1.85 to -0.43, both P <0.05). Conclusion Height adjusted desks and chairs, which can effectively increase the viewing distance for primary school students, has positive implications for improving healthy eye care behaviors among children and adolescents.

ObjectiveTo investigate the association between immunoglobulin G （IgG）/immunoglobulin M （IgM） ratio and prognosis in patients with initially unresectable hepatocellular carcinoma （iuHCC） receiving TTP triple therapy with transcatheter arterial chemoembolization （TACE）， tyrosine kinase inhibitor （TKI）， and programmed cell death protein-1 （PD-1） inhibitors. MethodsA retrospective analysis was performed for the clinical data of 151 iuHCC patients who received TTP triple therapy in Department of Hepatobiliary Surgery， Guangxi Medical University Cancer Hospital， from November 2019 to December 2022， and according to IgG/IgM ratio， they were divided into high IgG/IgM group （IgG/IgM ratio >13.23） and low IgG/IgM group （IgG/IgM ratio ≤13.23）. The t-test was used for comparison of continuous data between groups， and the chi-square test was used for comparison of categorical data between groups. The Kaplan-Meier method and the log-rank test were used for survival analysis， and the Cox proportional hazards model was used to investigate the potential influencing factors for overall survival （OS）. ResultsThe 151 patients had a median OS of 26.7 months （95% confidence interval ［CI］： 19.8-not reached） and a median progression-free survival of 12.5 months （95%CI： 10.4 — 15.8）. The objective response rate was 83.4% and the disease control rate was 94.0%. There were no significant differences in baseline data between the high IgG/IgM group and the low IgG/IgM group （all P>0.05）. There was a significant difference in median OS between the high IgG/IgM group and the low IgG/IgM group （20.6 months vs not reached， P=0.016）. In both the high IgG/IgM group and the low IgG/IgM group， salvage hepatectomy was significantly associated with the improvement in OS （χ²=8.297 and 10.307， both P<0.05）. The multivariate analysis showed that high IgG/IgM ratio （hazard ratio ［HR］=1.799， 95%CI： 1.077 — 3.006， P=0.025）， baseline alpha-fetoprotein >400 ng/mL （HR=1.762， 95%CI： 1.017 — 3.050， P=0.043）， and BCLC stage （HR=2.265， 95%CI： 1.212 — 4.232， P=0.010） were independent influencing factors for OS. ConclusionHigh IgG/IgM ratio is associated with a poorer prognosis in iuHCC patients receiving TTP triple therapy， and salvage hepatectomy has a potential value in improving the prognosis of patients with a high IgG/IGM ratio.

Tumor drug resistance is an important problem in the failure of chemotherapy and targeted drug therapy, which is a complex process involving chromatin remodeling. SWI/SNF is one of the most studied ATP-dependent chromatin remodeling complexes in tumorigenesis, which plays an important role in the coordination of chromatin structural stability, gene expression, and post-translation modification. However, its mechanism in tumor drug resistance has not been systematically combed. SWI/SNF can be divided into 3 types according to its subunit composition: BAF, PBAF, and ncBAF. These 3 subtypes all contain two mutually exclusive ATPase catalytic subunits (SMARCA2 or SMARCA4), core subunits (SMARCC1 and SMARCD1), and regulatory subunits (ARID1A, PBRM1, and ACTB, etc.), which can control gene expression by regulating chromatin structure. The change of SWI/SNF complex subunits is one of the important factors of tumor drug resistance and progress. SMARCA4 and ARID1A are the most widely studied subunits in tumor drug resistance. Low expression of SMARCA4 can lead to the deletion of the transcription inhibitor of the BCL2L1 gene in mantle cell lymphoma, which will result in transcription up-regulation and significant resistance to the combination therapy of ibrutinib and venetoclax. Low expression of SMARCA4 and high expression of SMARCA2 can activate the FGFR1-pERK1/2 signaling pathway in ovarian high-grade serous carcinoma cells, which induces the overexpression of anti-apoptosis gene BCL2 and results in carboplatin resistance. SMARCA4 deletion can up-regulate epithelial-mesenchymal transition (EMT) by activating YAP1 gene expression in triple-negative breast cancer. It can also reduce the expression of Ca²⁺ channel IP3R3 in ovarian and lung cancer, resulting in the transfer of Ca²⁺ needed to induce apoptosis from endoplasmic reticulum to mitochondria damage. Thus, these two tumors are resistant to cisplatin. It has been found that verteporfin can overcome the drug resistance induced by SMARCA4 deletion. However, this inhibitor has not been applied in clinical practice. Therefore, it is a promising research direction to develop SWI/SNF ATPase targeted drugs with high oral bioavailability to treat patients with tumor resistance induced by low expression or deletion of SMARCA4. ARID1A deletion can activate the expression of ANXA1 protein in HER2+ breast cancer cells or down-regulate the expression of progesterone receptor B protein in endometrial cancer cells. The drug resistance of these two tumor cells to trastuzumab or progesterone is induced by activating AKT pathway. ARID1A deletion in ovarian cancer can increase the expression of MRP2 protein and make it resistant to carboplatin and paclitaxel. ARID1A deletion also can up-regulate the phosphorylation levels of EGFR, ErbB2, and RAF1 oncogene proteins.The ErbB and VEGF pathway are activated and EMT is increased. As a result, lung adenocarcinoma is resistant to epidermal growth factor receptor tyrosine kinase inhibitors (EGFR-TKIs). Although great progress has been made in the research on the mechanism of SWI/SNF complex inducing tumor drug resistance, most of the research is still at the protein level. It is necessary to comprehensively and deeply explore the detailed mechanism of drug resistance from gene, transcription, protein, and metabolite levels by using multi-omics techniques, which can provide sufficient theoretical basis for the diagnosis and treatment of poor tumor prognosis caused by mutation or abnormal expression of SWI/SNF subunits in clinical practice.

BACKGROUND:Cervical disc herniation can cause pain in the neck and shoulder area,as well as radiating pain in the upper limbs.The incidence rate is increasing year by year and tends to affect younger individuals.Fully understanding the biomechanical characteristics of the cervical spine in adolescents is of great significance for preventing and delaying the onset of cervical disc herniation in this age group. OBJECTIVE:To reconstruct cervical spine models for both healthy adolescents and adolescent patients with cervical disc herniation utilizing finite element analysis techniques,to analyze the motion range of the C1-T1 cervical vertebrae as well as the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and the cartilage of the small joints. METHODS:A normal adolescent's cervical spine and an adolescent patient with cervical disc herniation were selected in this study.The continuous scan cervical spine CT raw image data were imported into Mimics 21.0 in DICOM format.The C1-T1 vertebrae were reconstructed separately.Subsequently,the established models were imported into the 3-Matic software for disc reconstruction.The perfected models were then imported into Hypermesh software for meshing of the vertebrae,nucleus pulposus,annulus fibrosus,and ligaments,creating valid geometric models.After assigning material properties,the final models were imported into ABAQUS software to observe the joint motion range of the C1-C7 cervical vertebrae segments under different conditions,and to analyze the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and small joint cartilage of each cervical spine segment. RESULTS AND CONCLUSION:(1)In six different conditions,the joint motion range of the C1 vertebra in the cervical spine models of both normal adolescent and adolescent patient with cervical disc herniation was higher than that of the other vertebrae.Additionally,the joint motion range of each cervical spine segment in normal adolescent was greater than that in adolescent patient with cervical disc herniation.(2)In the cervical spine model of normal adolescent,the maximum stress values in the annulus fibrosus and nucleus pulposus were found on the left side during C2-3 flexion conditions(0.43 MPa and 0.17 MPa,respectively).In the cervical spine model of adolescent patient with cervical disc herniation,the maximum stress values were found on the left side during C7-T1 flexion conditions(0.54 MPa and 0.18 MPa,respectively).(3)In the cervical spine model of normal adolescent,the maximum stress value on the endplate was found on the left side of the upper endplate of C3 during flexion conditions(1.46 MPa).In the model of adolescent patient with cervical disc herniation,the maximum stress value on the endplate was found on the left side of the lower endplate of C7 during flexion conditions(1.32 MPa).(4)In the cervical spine model of normal adolescent,the maximum stress value in the small joint cartilage was found in the C2-3 left rotation conditions(0.98 MPa).In adolescent patient with cervical disc herniation,the stress in the small joint cartilage significantly increased under different conditions,especially in C1-2,with the maximum stress found during left flexion(3.50 MPa).(5)It is concluded that compared to normal adolescent,adolescent patient with cervical disc herniation exhibits altered cervical curvature and a decrease in overall joint motion range in the cervical spine.In adolescent with cervical disc herniation,there is a significant increase in stress on the annulus fibrosus,nucleus pulposus,and endplates in the C7-T1 segment.The stress on the left articular cartilage of the C1-2 is notable.Abnormal cervical curvature may be the primary factor causing these stress changes.

BACKGROUND:Currently,spinal endoscopic technology has become the mainstream technology in minimally invasive spinal surgery.The specifications of the instruments for different operating systems are different,and the choice of specific surgical protocols needs to be combined with the actual situation of the patient and the choice of the clinical surgeon. OBJECTIVE:To compare the early efficacy of percutaneous endoscopic interlaminar discectomy for L5-S1 disc herniation under the iLESSYS Delta System and Endo-Surgi Plus System. METHODS:Totally 80 patients with L5-S1 disc herniation were treated with percutaneous endoscopic interlaminar discectomy.Patients were divided into two groups based on the endoscopic system used.Among them,37 cases received the iLESSYS Delta System(Delta group)and 43 cases received the Endo-Surgi Plus System(Plus group).Patient demographic characteristics,perioperative indicators,and complications were analyzed between the two groups.Clinical outcomes were quantified using back and leg visual analog scale scores,Oswestry Disability Index,and Japanese Orthopaedic Association scores at 1 day,1,3,and 6 months after surgery.Patient satisfaction was assessed according to modified MacNab criteria at final follow-up. RESULTS AND CONCLUSION:(1)The operative time and number of arthroplasties in the Plus group were less than those in the Delta group,and the differences were statistically significant(P<0.05).(2)Compared with the preoperative period,the visual analog scale scores,Oswestry Disability Index,and Japanese Orthopaedic Association scores of patients in both groups improved at all follow-up time points,and the difference was statistically significant(P<0.001).(3)There was no statistically significant difference in the comparison of pain visual analog scale scores,Oswestry Disability Index,and Japanese Orthopaedic Association scores of patients in the two groups(P>0.05).(4)At 6-month follow-up after surgery,the MacNab standard excellent and good rates in the Delta group and Plus group were 81%and 79%,respectively,with no significant difference(P=0.823).(5)The incidence of complications was 3%in the Delta group and 2%in the Plus group,but there was no significant difference between the two groups(P=0.914).(6)It is concluded that both iLESSYS Delta and Endo-Surgi Plus surgical systems achieved satisfactory early clinical results in the treatment of lumbar disc herniation,with Endo-Surgi Plus surgical moulding being more efficient and safer.

This paper discussed the nature of ulcerative colitis， that is deficiency of the root and excess of the branch， from the theory of sweat pore， and to explore the theoretical basis and experience of treating this disease with retention enema of traditional Chinese medicine （TCM）. The main location of this disease is in the intestine. As a part of sweat pore， the intestinal sweat pore serves as the gateway for the ascending， descending， exiting and entering of qi movement in the zang fu （脏腑） organs， meridians and collaterals， as well as the channel for the transportation of qi， blood and body fluids. The constraint and closure of the intestinal sweat pore are the main pathological basis of ulcerative colitis. According to the manifestations of colonoscopy， and the different etiological factors and pathogenesis that lead to the constraint and closure of sweat pore， there should be different treatment focuses such as expelling wind to open sweat pore， clearing fire to open sweat pore， promoting blood circulation to open sweat pore， for which wind-dispersing herbs， heat-clearing herbs， and blood-activating herbs are used accordingly. The method of retention enema can directly induce Chinese medicinal herbs to the affected part， so as to diffuse and unblock the sweat pore， regulate qi and blood， and thus restore the normal function of the intestinal sweat pore.

To target the pivotal BCR/ABL oncoprotein in chronic myeloid leukemia (CML) cells, tyrosine kinase inhibitors (TKIs) are utilized as landmark achievements in CML therapy. However, TKI resistance and intolerance remain principal obstacles in the treatment of CML patients. In recent years, drug repositioning provided alternative and promising perspectives apart from the classical cancer therapies, and promoted anthelmintic mebendazole (MBZ) as an effective anti-cancer drug in various cancers. Here, we investigated the role of MBZ in CML treatment including imatinib-resistant CML cells. Our results proved that MBZ inhibited the proliferation and induced apoptosis in CML cells. We found that MBZ effectively suppressed BCR/ABL kinase activity and MEK/ERK signaling pathway by reducing p-BCR/ABL and p-ERK levels with ABL1 targeting ability. Meanwhile, MBZ directly targeted the colchicine-binding site of β-tubulin protein, hampered microtubule polymerization and induced mitosis arrest and mitotic catastrophe. In addition, MBZ increased DNA damage levels and hampered the accumulation of ataxia-telangiectasia mutated and DNA-dependent protein kinase into the nucleus. This work discovered that anthelmintic MBZ exerts remarkable anticancer effects in both imatinib-sensitive and imatinib-resistant CML cells in vitro and revealed mechanisms underlying. From the perspective of drug repositioning and multi‐target therapeutic strategy, this study provides a promising option for CML treatment, especially in TKI-resistant or intolerant individuals.

Autophagy is a conservative lysosome-dependent material catabolic pathway, and exists in all eukaryotic cells. Autophagy controls cell quality and survival by eliminating intracellular dysfunction substances, and plays an important role in various pathophysiology processes. Erectile dysfunction (ED) is a common male disease. It is resulted from a variety of causes and pathologies, such as diabetes, hypertension, hyperlipidemia, aging, spinal cord injury, or cavernous nerve injury caused by radical prostatectomy, and others. In the past decade, autophagy has begun to be investigated in ED. Subsequently, an increasing number of studies have revealed the regulation of autophagy contributes to the recovery of ED, and which is mainly involved in improving endothelial function, smooth muscle cell apoptosis, penile fibrosis, and corpus cavernosum nerve injury. Therefore, in this review, we aim to summarize the possible role of autophagy in ED from a cellular perspective, and we look forward to providing a new idea for the pathogenesis investigation and clinical treatment of ED in the future.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.