In order to establish a method by which the recombinant suicide plasmids integrated on the chromosome could be recircled, A simple method of transconjugative cloning was established with the helper plasmids pMT999 or pRK2013 and fusion strains of Shigella flexneri which were obtained by screening with in vivo expression technology. And the cloning efficiency with this method is very high.

Objective To evaluating the effectiveness of comprehensive measures to control the plague in epidemic areas in Longlin county Guangxi from 2001 to 2010.Methods Original epidemic places was deratised,indicative animals were investigated,and epidemic clues were searched.Cage trapping method was used to capture rat and rat body fleas were collected in the plague epidemic areas.The flea-carrying rates and flea index of rodents were calculated based on the number of fleas collected from caged rodents.The animals were then subjected to etiological and serological tests to determine the plague infection rate.Results A total of 1008 rats were captured and 571 fleas were collected from 2001 to 2010,of which Rattus Flavipestus accounted tor 81.65％(823/1008) and Xenopsylla Cheopis for 64.10％(366/571).The annual average rodents infected with flea and the index of flea were 23.02％ (177/769) and 0.74,respectively.The annual average density of rodents decreased from 3.99％ (859/21 508,before deratised) to 0.96％ (149/15 600,after deratised).The deratization rate was 75.94％.Conclusion The risk of a plague epidemic in Longlin county is reduced after continued comprehensive measures be taken to deal with the disease.

To update and improve the Chinese concept of Zhishengquan,a comparative analysis was made of the U.S. military terms and PLA military terms.Zhishengquan is re-defined as "command and superiority in the bio-domain".

Objective To apply PDCA circle management method to eliminate redundant medical consumables items and reduce the burden of consumables item information system,so as to realize fine management of medical consumables.Methods The consumables items un-mobilized during 2013 to 2015 were summarized,and the causes were analyzed.The redundant consumables items were sealed up in the materials management system.Results The utilization rate of consumables items were increased from 61％ to 82％,and the target value was 71％,that is,fine management was realized.Conclusion PDCA method can optimize the management of medical consumables items,and enhance the efficiency of materials information system.

Objective To analyze the outcome of surveillance results on plague and to provide the evidences for the policy making in Longlin county Guangxi. Methods The epidemic data and the surveillance results of plague were analyzed and assessed with epidemiology methods in Longlin county Guangxi from 2000 to 2009, and the density of rodents, the rodents infected with flea, flea index and other indicators were calculated. Regional composition of the rats and fleas were analyzed. Results A totally of 4829 rats were captured and 4737 fleas were collected in the past 10 years, Rattus Flavipestus(81.92%,3956/4829) and Xenopsylla Cheopis (79.04%,3744/4737) were dominant species. The annual average density of rodents, the rodents infected with flea, index of flea were 3.30%(4829/146 206), 27.99%(1351/4827) and 0.98(4737/4827), respectively. A totally of 4792 rats were examined and 10 strains Yersinia Pestis were isolated. Indirect hemorrhagic assessed(IHA) was used to test the F1 antibody against plague in the blood serum of the rats and indicator animals, and 3 positive rats and 24 positive animals were found, respectively. Twenty seven natural villages in 3 towns had been involved in the plague. Conclusions The plague foci exists in Longlin county of Guangxi province. The plague foci in the areas have the same feature with the plague foci of Rattus Flavipectus. There is a potential risk for plague in this region, we should improve the quality of surveillance, increase indicator animals of the plague, and try to apply new surveillance method.

Objective To explore the management methods of medical equipment maintenance. Methods Based on the staffing of hospital engineering technician, the difference between levels of hospitals in medical equipment maintenance management was explored from the aspects of maintenance, preventive maintenance, use training of medical equipment, medical equipment maintenance management system and etc. Results The management methods of medical equipment maintenance were different corresponding to the configurations of the departments of clinical engineering. Conclusion The maintenance management method corresponding to the staffing of hospital engineering technician as well as the correct use of modern medical equipment contribute to insuring the safety and reliability and enhancing the availability and utilization rate.

OBJECTIVETo investigate the value of contrast-enhanced ultrasound in the differential diagnosis of solid focal lesions of pancreas (s-FLPs).

METHODSWe retrospectively analyzed the clinical data of 56 s-FLPs examined with contrast agent combined with low mechanical indicators contrast-enhanced ultrasound.

RESULTSThe surrounding pancreas parenchyma enhancement time, lesion enhancement time, and peak enhancement time between different groups of s-FLPs had no significant differences (P > 0.05), while the beginning to peak enhancement time showed significant difference (P < 0.05). When using the enhancement speed as a diagnostic indicator to differentiate pancreatic carcinoma from tumor-like pancreatitis, the sensitivity, specificity, and accuracy were 90.5%, 71.4%, and 85.7% for pancreatic carcinoma and 75.0%, 91.7%, and 89.3% for tumor-like pancreatitis. When using the enhancement pattern as a diagnosis indicator to differentiate pancreatic carcinoma from tumor-like pancreatitis, the sensitivity, specificity, and accuracy were 85.7%, 78.6%, and 83.9% for pancreatic carcinoma and 75.0%, 100%, and 94.6% for tumor-like pancreatitis. When different indicators were combined, enhancement pattern and enhancement speed showed the best diagnostic results; however, the Youden index was not improved.

CONCLUSIONSDifferent s-FLPs show different enhancement findings on contrast-enhanced ultrasound. The enhancement pattern and enhancement speed are the most useful diagnostic indicators.

Diagnosis, Differential ; Humans ; Pancreas ; diagnostic imaging ; Pancreatic Neoplasms ; diagnostic imaging ; Pancreatitis ; diagnostic imaging ; Retrospective Studies ; Ultrasonography

Shigella flexneri is an infectious pathogen that causes dysentery to human, which remains a serious threat to public health, particularly in developing countries. In this study, the global protein expression patterns of S. flexneri during transition from exponential growth to stationary phase in vitro were analyzed by using 2-D PAGE combined with MALDI-TOF MS. In a time-course experiment with five time points, the relative abundance of 49 protein spots varied significantly. Interestingly, a putative outer membrane protein YciD (OmpW) was almost not detected in the exponential growth phase but became one of the most abundant proteins in the whole stationary-phase proteome. Some proteins regulated by the global regulator FNR were also significantly induced (such as AnsB, AspA, FrdAB, and KatG) or repressed (such as AceEF, OmpX, SodA, and SucAB) during the growth phase transition. These proteins may be the key effectors of the bacterial cell cycle or play important roles in the cellular maintenance and stress responses. Our expression profile data provide valuable information for the study of bacterial physiology and form the basis for future proteomic analyses of this pathogen.
Bacterial Proteins ; analysis ; Computational Biology ; Electrophoresis, Gel, Two-Dimensional ; Gene Expression Profiling ; methods ; Kinetics ; Peptide Mapping ; Proteome ; analysis ; Proteomics ; methods ; Shigella flexneri ; growth & development ; metabolism ; pathogenicity ; Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization ; Temperature ; Trypsin ; pharmacology ; Virulence

Objective:To investigate the application value of establishing the differential diagnosis model of pulmonary tuberculosis using routine laboratory data.Methods:The retrospective study was conducted. The routine laboratory data of newly diagnosed patients with pulmonary tuberculosis and other pulmonary diseases in Beijng Jishuitan Hospital and Beijing Hepingli Hospital from May 2015 to November 2021were collected. According to the random numbers showed in the computer, all the 11516 patients were divided into training dataset and test dataset with a ratio of 9∶1. Four machine learning algorithms, Support Vector Machine, Random Forest, K-Nearest Neighbor and Logistic Regression, were used to build models and select features. The diagnostic accuracy of each model was verified by using the 10-fold cross-validation method and the performance of each model was evaluated by using the receptor operator of characteristic (ROC) curve.Results:Random Forest was selected as the optimal machine learning algorithm to build the best feature model in the study. According to importance scale of factors, the differential diagnosis model of pulmonary tuberculosis consisting of 37 non-specific test indexes. In the validation set and test set the accuracy and area under curve (AUC) of the models were 0.747 and 0.736, the sensitivity, specificity and accuracy were 68.03% and 68.75%, 70.91% and 67.90%, 70.30% and 68.12%, respectively.Conclusion:A key tool in the differential diagnosis model of pulmonary tuberculosis was established by routine laboratory data in combination with machine learning. The results of this study need to be further verified by more data from medical institutions.

BACKGROUND: The stress distribution is different between implants and natural teeth, and the biomechanical characters of implant-natural tooth supported fixed partial dentures need to be explored.OBJECTIVE: To analyze the distributions of stress and strain on the implant interface and natural tooth ligaments by loading a vertical force to a single implant crown, natural tooth crown and a implant-natural tooth supported fixed partial denture.METHODS: Two male healthy Beagle dogs were selected, and their right mandibular first molars were exacted under general anesthesia. Three months later, a 3.3 mm×10 mm RN ITI implant was implanted into the defect region of each dog. The dogs were killed under anesthesia after another 3 months to remove the mandible. One dog was restored by a single implant and natural tooth crown, and the other was restored by the implant-natural tooth supported fixed partial dentures. The specimens were fixed to the load device after embedded with self caring acrylic resin, and the strain gauges were pasted to the cortical bone around the implant and natural tooth neck. The vertical force was loaded to the implant, natural tooth and fixed denture with 40, 60, 80,120, and 160 N.RESULTS AND CONCLUSION: When the force was loaded to the implant of combined denture, the implant stress of combined denture was less than that of the single implant repair, and partial force was loaded on natural teeth; when the force was loaded to the natural tooth of combined denture, the stress to the natural tooth of combined denture was less than that of the single natural tooth repair. When the force was loaded to the natural tooth of combined denture, the stress was assumed by the whole prostheses. However, the stress was almost assumed by the implant when the force was loaded to the implant of combined denture. That is to say, it is feasible to use the implant-natural tooth supported fixed partial dentures.