1.Secondary infections in hepatitis B patients with acute-on-chronic liver failure and its relationship with the prognosis
Dongying XIE ; Zhebin WU ; Zhiliang GAO
Chinese Journal of Clinical Infectious Diseases 2010;3(2):73-75
Objective To investigate the characteristics of secondary infections in hepatitis B patients with acute-on-chronic liver failure(ACLF)and its impact on the prognosis. Methods Infection sites, clinical and etiological characteristics were retrospectively reviewed in 186 hospitalized patients with ACLF from the Third Affiliated Hospital of Sun Yat-sen University during January to December 2007. Logistic regression was used to analyze risk factors of secondary infections. Results In 186 patients with ACLF, 160 patients(86.0%) were complicated with infections, and the common sites of infections were abdominal cavity, biliary tract, lung and intestinal tract. The rates of secondary infections were higher in patients with serum albumin(Alb)≤30 g/L, total bilirubin(TBil)>342 μmol/L, prothrombin time(PT)>28 seconds, and those complicated with one or more complications(χ~2=5.4, 7.3, 21.3 and 14.7, P<0.05). The fatality rates of patients with and without infections were 74. 5%(119/160) and 42.3%(11/26), respectively, and the difference was of statistical significance(χ~2=10.9,P=0.000). Patients with multi-organ infections had a higher fatality rate(79.8%, 79/99)than those with one organ infections(65.6%, 40/61), and the difference was also significant(χ~2=4.0, P=0.045). Conclusion Patients with ACLF are liable to infection, and the severity is closely related with the prognosis.
3.Therapeutic effectiveness of thalidomide to multiple myeloma and its mechanism.
Minglin WANG ; Yuefen LIU ; Yinggang LI ; Hongguang WU
Chinese Journal of Hematology 2002;23(10):514-516
OBJECTIVETo observe the effective mechanism and side effects of thalidomide to multiple myeloma (MM).
METHODSTen cases of MM were studied, of which 3 were previously untreated and 7 refractory or relapsed. Bone marrow microvascular density (MVD) was detected by factor-VIII related antigen and CD(34) immunohistological staining and serum concentration of vascular endothelial growth factor (VEGF) before and after treatment was determined by ELISA. The initial dosage of thalidomide was 100 approximately 200 mg/d with a weekly escalation of 50 mg/d to 450 approximately 650 mg/d. The therapeutic effectiveness is classified into partial remission, improvement and uneffective according to the decrease of serum M protein and bone marrow myeloma cells. Anemia, renal function and blood electrolytes were also observed.
RESULTSBefore treatment, MVD was 73.32 +/- 28.80 and 32.30 +/- 12.50 in MM and control group, respectively, (P < 0.01). MVD in MM group decreased to 56.12 +/- 19.34 after treatment, and was of significant difference (P < 0.05) as compared to the pretreatment value. However, there was still a significant difference as compared to control (56.12 +/- 19.34 vs 32.30 +/- 12.50, P < 0.01). The concentration of VEGF significantly decreased after treatment [from (178.23 +/- 26.56) ng/L to (78.48 +/- 19.98) ng/L, P < 0.01)]. The total effective rate was 70%. There were no serious side effects.
CONCLUSIONMVD and VEGF concentration were decreased obviously by thalidomide treatment. The dosage of 450 approximately 650 mg/d might be effective in refractory or initial MM.
Aged ; Angiogenesis Inhibitors ; adverse effects ; therapeutic use ; Antigens, CD34 ; analysis ; Bone Marrow ; blood supply ; drug effects ; Constipation ; chemically induced ; Endothelial Growth Factors ; blood ; Fatigue ; chemically induced ; Female ; Humans ; Immunohistochemistry ; Intercellular Signaling Peptides and Proteins ; blood ; Lymphokines ; blood ; drug effects ; Male ; Middle Aged ; Multiple Myeloma ; blood ; drug therapy ; pathology ; Nausea ; chemically induced ; Sleep Wake Disorders ; chemically induced ; Thalidomide ; adverse effects ; therapeutic use ; Treatment Outcome ; Vascular Endothelial Growth Factor A ; Vascular Endothelial Growth Factors ; von Willebrand Factor ; analysis
4.Changes and significance of serum glial fibrillary acidic protein (GFAP) in patients with Parkinson disease
Wen SU ; Haibo CHEN ; Shuhua LI ; Dongying WU
Chinese Journal of General Practitioners 2008;7(10):683-685
Objective To investigate changes in serum level of glial fibrillary acidic protein (GFAP) in patients with Parkinson disease (PD) and its clinical significance. Methods Serum GFAP was determined with sandwich ELISA for 82 patients with PD and acute cerebral infarction (ACI), as well as healthy normal controls. Patients with PD were then divided into two sub-groups in terms of their course duration, one with less than five years and the other with more than or equal to five years. Effects of course duration and age of the patients on their serum GFAP were analyzed. Results Serum level of GFAP was significantly higher in patients with PD [(1.628±0.104) μg/L] and ACI [(1. 637±0. 063 )μg/L] than that in healthy normal controls [ (0. 025±0. 003)μg/L, t = 82. 7, 142. 2, all P <0. 05 ]. But, there was no significant difference in serum GFAP between patients with PD and ACI ( t =0. 214, P > 0. 05 ). Serum level of GFAP in PD patients had no significant correlation with their age. There was no significant difference in serum GFAP between two sub-groups of patients with PD (P > 0.05 ). Conclusions Serum level of GFAP increased significantly in PD patients, as compared to healthy normal controls, but it is not specific. Serum GFAP in patients with PD maintained at certain high level with progression of the disease, indicating effect of astrocytes may persistently exist during the disease course.
5.Clinical application of 3D printing guild plate in total knee arthroplasty
Dongying WU ; Feng YUAN ; Jibin WU ; Jutai WU ; Fengchao ZHAO ; Chao LI
Chinese Journal of Orthopaedics 2015;(9):921-926
Objective To evaluate the efficacy and safety of total knee arthroplasty (TKA) with 3D printing guild plate by comparing with conventional TKA. Methods From May 2014 to September 2014, 40 patients suffered primary unilateral TKA were received, in which there were 11 males and 29 females, aged from 57 to 82 years with an average age of 68.5±6.3 years. The subjects were divided into two groups randomly. One group was treated with TKA with 3D printing guild plate while the other group was treated with the conventional TKA. The blood loss, operation time, post?operative Hospital for Special Surgery (HSS) score, range of motion (ROM), lower limb mechanical alignment and incidence of complication were compared with insignificant differences. Results The operation time in the 3D printing TKA group (103.4±11.7 min) was lower than that in the conventional TKA group (124.5±21.6 min), which was statistically significant (t=3.838, P=0.000). The blood loss in the 3D printing TKA group (370.2±96.0 ml) was lower than that in the conventional TKA group (510.0±235.9 ml), which was statistically significant (t=2.454, P=0.019). The post?operative ROM of knee in the 3D printing TKA group was 104.3° ± 15.5° and that in the conventional TKA group was 103.5° ± 12.5° (t=0.169, P=0.867). HSS scores in the 3D printing TKA group and in the conventional TKA group were 88.5±5.7 and 89.4±4.8, which was statistically insignificant (t=-0.633,P=0.530). Mechanical alignment in the 3D printing TKA group was 2.9°±1.1° and that in the conventional TKA group was 3.0°±0.9°, which was not statistically significant (t=-0.317, P=0.753). No obvious complication occurred in two groups. Conclusion TKA with 3D printing guild plate has similar results to conventional TKA in HSS score, mechanical alignment and ROM of knee, but it shortens operation time and decreases the blood loss.
6.Treatment of mid-distal humeral shaft fractures associated with radial nerve palsysis by minimally invasive screwed nails osteosynthesis technique.
Wei ZANG ; Yun-feng LIU ; Quan-min WU
China Journal of Orthopaedics and Traumatology 2009;22(7):515-517
OBJECTIVETo investigate the surgical treatment of mid-distal humeral shaft fractures associated with radial nerve palsysis with minimal invasive screwed nails osteosynthesis technique.
METHODSThirty-six patients treated mid-distal humeral shaft fractures associated with radial nerve palsysis from January 2004 to January 2008. There were 28 males and 8 females whose age ranged from 20- to 58-years-old with an average of 36.5-years-old. Injury reasons: mechanical injury 18 cases, traffic injury 8 cases, accidents injury 10 cases, all cases were closed fracture. According to AO/ASIF classification, type A1 5 cases, type A2 7 cases, type B1 8 cases, type B2 7 cases, type B3 5 cases, type C3 4 cases. The small lateral incision was performed located to the fracture. After exploration of the radial nerve, the fractures were reduced. By acromion small lateral incision, the deltoid was separated. In the posterior macronodular slotted antegrade reamed bored with medullary cavity drill and selected a suitable screwed nail screwed into the medullary cavity distal. Along the slot, the locking pieces were inserted to complete the fixation. The postoperative complication, fracture healing time, radial nerve function recovery time, the motion of shoulder and elbow were recorded.
RESULTSThe incision of all cases healed with stage I . The patients were followed up for 9-36 weeks with an average of 18.5 weeks. The X-ray examination showed fractures healing in 12-16 weeks (average of 15.6 weeks). Radial nerve function recovered fully at 12-36 weeks after operation (average of 17.8 weeks). Shoulder abduction is 150 degrees-170 degrees with an average of 160 degrees; elbow motion of activities was 130 degrees-140 degrees with an average of 135 degrees. The ASES method was used to assess the shoulder joint function, 20 cases gained the excellent result, 12 good and 4 poor. And according to HSS method, 36 cases of elbow joint function gained the excellent result.
CONCLUSIONThe surgical treatment of mid-distal humeral shaft fractures associated with radial nerve palsysis with minimal invasive screwed nails osteosynthesis technique is effective.
Adult ; Bone Nails ; Bone Screws ; Female ; Fracture Fixation, Internal ; Humans ; Humeral Fractures ; surgery ; Humerus ; injuries ; innervation ; surgery ; Internal Fixators ; Male ; Paralysis ; surgery ; Radial Nerve ; pathology ; Young Adult
7.Epidemiological investigation of adult chronic kidney disease in the Xishuangbanna district of Yunnan province
Yang LUO ; Yipu CHEN ; Wenge LI ; Xiaoyi XU ; Guoping LIU ; Yong WANG ; Dongying WU ; Ling YANG
Chinese Journal of Nephrology 2008;24(9):609-613
Objective To investigate the prevalence and risk factors of adult chronic kidney disease (CKD) in the Xishuangbanna district of Yunnan province with a big population of minorities. Methods Residents aged 20 years and older in the area of Xishuangbannan were randomly selected by using a stratified, multi-stage sampling method. All the residents were tested for morning spot urine of albumin tO creatinine ratio (ACR) (abnormal≥ 30 mg/g); morning spot urine dipstick of hematufia (abnormal 1+ or greater) was confirmed by urine microscopy (abnormal > 3 red blood cells/HP); and modified simplified MDRD equation for Chinese adult was applied to characteristics, health characteristics (e.g. hyperglycemia, hyperlipidemia and hypertension) and indicators of kidney damage were also examined. Results Eligible data of 5566 subjects were included in the study. The prevalence of albuminuria was 8.06%, hematuria was 4.01% and reduced eGFR was 2.89%. Apart from the repetition among microalbuminuria, hematuria and reduced eGFR, approximately 12.53% subjects had at least one indicator of kidney damage. The prevalence of CKD in stratified subgroups with age, gender, nations and CKD risk factors was coincidence with the Logistic regression results. Age increase, hypertension, byperlipidemia and fasting plasma glucose increase were independently associated with albuminuria; age increase, hypertension were independently associated with reduced renal function; age increase was independently associated with hematouria. Conclusions The prevalence of adult chronic kidney disease is 12.53% in the Xishuangbanna district of Yunnan province. Independent risk factors associated with kidney damage are age, hyperglycemia, hyperlipidemia and hypertension.
8.The effects of periodontitis on the expression of apoptosis-related proteins in pancreas of rats with Type 2 Diabetes Mellitus
Jiayi WU ; Zhe XU ; Jia NI ; Dan WANG ; Shigao LUO ; Xi YANG ; Dongying XUAN ; Jincai ZHANG
Journal of Practical Stomatology 2014;(4):464-468
Objective:To evaluate the effects of periodontitis on the expression of apoptosis-related proteins in pancreas of rats with Type 2 Diabetes Mellitus.Methods:Spontaneously type 2 diabetic OLETF rats were randomly divided into 2 groups:diabetes with or without periodontitis(diabetes group and combination group).LETO rats with the same germline and the same age but having normal glucose tolerance were randomly divided into control group and periodontitis group.20 weeks after periodontitis were established,all the rats were sacrificed and the pancreas were pathologically examined by HE staining.The expression of Bax,Bcl-2 and Caspase-3 in the pancreas islet were detected by immunohistochemistry staining and semi-quantitative analysis.Results:The expression of Bax, Bcl-2 and Caspase-3 in the pancreas islet was no significant difference between control and periodontitis groups(P=0.324,P=0.091,P=0.852).Compared with diabetes group,the expression of Bax and Caspase-3 in combination group showed a significant increase(P=0.000,P=0.000),and the expression of Bcl-2 was significantly decreased(P=0.022).Conclusion:Under healthy conditions,periodontitis has no effect on the expression of apoptosis-related proteins in rat pancreas islet.However,in rats with diabe-tes,periodontitis may affect the expression of apoptosis-related proteins in pancreas islet.
9.Respiratory mechanics analysis of inspiratory trigger in mechanical ventilation.
Yunzhen WU ; Na GAI ; Jingjing ZHANG
Chinese Critical Care Medicine 2023;35(10):1116-1120
OBJECTIVE:
To find out the circuit pressure and flow at the trigger point by observing the characteristics of the inspiratory trigger waveform of the ventilator, confirm the intra-alveolar pressure as the index to reflect the effort of the trigger according to the working principle of the ventilator combined with the laws of respiratory mechanics, establish the related mathematical formula, and analyze its influencing factors and logical relationship.
METHODS:
A test-lung was connected to the circuit in a PB840 ventilator and a SV600 ventilator set in pressure-support mode. The positive end-expiratory pressure (PEEP) was set at 5 cmH2O (1 cmH2O ≈ 0.098 kPa), and the wall of test-lung was pulled outwards till an inspiratory was effectively triggered separately in slow, medium, fast power, and separately in flow-trigger mode (sensitivity VTrig 3 L/min, 5 L/min) and pressure-trigger mode (sensitivity PTrig 2 cmH2O, 4 cmH2O). By adjusting the scale of the curve in the ventilator display, the loop pressure and flow corresponding to the trigger point under different triggering conditions were observed. Taking intraalveolar pressure (Pa) as the research object, the Pa (called Pa-T) needed to reach the effective trigger time (TT) was analyzed in the method of respiratory mechanics, and the amplitude of pressure change (ΔP) and the time span (ΔT) of Pa during triggering were also analyzed.
RESULTS:
(1) Corresponding relationship between pressure and flow rate at TT time: in flow-trigger mode, in slow, medium and fast trigger, the inhalation flow rate was VTrig, and the circuit pressure was separately PEEP, PEEP-Pn, and PEEP-Pn' (Pn, Pn', being the decline range, and Pn' > Pn). In pressure-trigger mode, the inhalation flow rate was 1 L/min (PB840 ventilator) or 2 L/min (SV600 ventilator), and the circuit pressure was PEEP-PTrig. (2) Calculation of Pa-T: in flow-trigger mode, in slow trigger: Pa-T = PEEP-VTrigR (R represented airway resistance). In medium trigger: Pa-T = PEEP-Pn-VTrigR. In fast trigger: Pa-T = PEEP-Pn'-VTrigR. In pressure-trigger mode: Pa-T = PEEP-PTrig-1R. (3) Calculation of ΔP: in flow trigger mode, in flow trigger: without intrinsic PEEP (PEEPi), ΔP = VTrigR; with PEEPi, ΔP = PEEPi-PEEP+VTrigR. In medium trigger: without PEEPi, ΔP = Pn+VTrigR; with PEEPi, ΔP = PEEPi-PEEP+Pn+VTrigR. In fast trigger: without PEEPi, ΔP = Pn'+VTrigR; with PEEPi, ΔP = PEEPi-PEEP+Pn'+VTrigR. In pressure-trigger mode, without PEEPi, ΔP = PTrig+1R; with PEEPi, ΔP = PEEPi-PEEP+PTrig+1R. (4) Pressure time change rate of Pa (FP): FP = ΔP/ΔT. In the same ΔP, the shorter the ΔT, the greater the triggering ability. Similarly, in the same ΔT, the bigger the ΔP, the greater the triggering ability. The FP could better reflect the patient's triggering ability.
CONCLUSIONS
The patient's inspiratory effort is reflected by three indicators: the minimum intrapulmonary pressure required for triggering, the pressure span of intrapulmonary pressure, and the pressure time change rate of intrapulmonary pressure, and formula is established, which can intuitively present the logical relationship between inspiratory trigger related factors and facilitate clinical analysis.
Humans
;
Respiration, Artificial/methods*
;
Positive-Pressure Respiration
;
Lung
;
Ventilators, Mechanical
;
Respiratory Mechanics
10. Analysis of pressure-time and flow-time curve in ventilator
Yunzhen WU ; Fangfang JIAO ; Weili LIU ; Fuquan GAO
Chinese Critical Care Medicine 2019;31(12):1491-1496
Objective:
To better understand the significance of the pressure-time curve and flow-time curve from the perspective of PB840 ventilator working principle.
Methods:
① Mechanical principle: flow supply valves (air valve and oxygen valve) and exhalation valve in PB840 ventilator were controlled to achieve the ventilation target (volume or pressure) by the central processing unit according to the monitoring data from pressure sensors (P1 at the supply side, P2 at the exhalation side) and flow sensors (Q1 at the air side, Q2 at the oxygen side, Q3 at the exhalation side). ② The essence of curve: each point means a value of pressure or flow at a certain time measured by the sensors or calculated by the system. ③ The respiratory process could be divided into inspiratory part, expiratory part, and the connection part from expiratory to inspiratory. The air running state and the respiratory mechanics relationship at the three parts could be inferred according to the form of curves.
Results:
① Inspiratory process: at volume-controlled and constant flow ventilation: there should be a relationship "Pc-Pa = XR" between alveolar pressure (Pa) and circuit pressure (Pc) according to Ohm law. So, the Pc curve (pressure-time curve) could indirectly reflect the Pa curve with the flow (X) and resistance (R) being constant. At pressure-set ventilation: it is the goal of ventilator to maintain the Pc at the target level. So, the stability of the target pressure line in pressure-time curve reflects the matching ability of the flow supply valves and the exhalation valve. ② Expiratory process: it could be divided into pre-expiratory [without basic flow (Ba) or bias flow (Bi)] and post-expiratory (with Ba or Bi), where Ba or Bi is equal to "Q1+Q2". So, the mathematical function are "X(t) = Q3t" in pre-part, and "X(t) = Q3t-(Q1t+Q2t)" in post-part. The relationship between pressure and flow at peak expiratory flow point: it could be found that there is an obvious time span and area formation under the curve from 0 to peak point (Fpeak) after stretching the abscissa axis of flow-time curve. It means that some gas have been discharged from the lung when it arrives at the peak point. So, the alveolar pressure should be lower than the platform pressure at the point (Pplat). The circuit pressure is significantly higher than positive end expiratory pressure (PEEP) at the point in the stretching axis diagram. So, it means that the formula "RE = (Pplat-PEEP)/Fpeak" to calculate the expiratory resistance (RE) is unreasonable in the angle of Ohm law. ③ The process from exhalation to inspiratory: according to the difference of the starting point of the conversion, it could be divided into two cases: one is that the inspiratory started from the ending of exhalation. Here, the inhaling starting point is lying in the abscissa axis. The other is that the inspiratory started before the ending of exhalation (with endogenous positive end expiratory pressure). Here, the starting point is lying below the abscissa axis, and the slope of the following curve is obviously larger than the slope of natural expiratory curve. According to the difference of results from the starting point to the end of the inhalation triggering effort, it could be divided into two cases: one is that it reach the trigger point. Here, the expiratory curve extends upward from or below the horizontal axis until an effective air supply is triggered. The other is that it could not reach the trigger point. Here, the expiratory curve extends upward from or below the horizontal axis, but then runs downward (meaning exhaling).
Conclusion
It is helpful to analyze the ventilation state, ventilation failure, and the causes of man-machine confrontation with understanding the ventilation principle and the air route map of the ventilator.