In this paper, NIRS (near infrared spectroscopy)-based total quality control system for the Tanreqing injection was introduced briefly. By analyzing and summing up the significance and difficulties, several important problems of the practical applications which need urgent solutions are proposed. And also the applicationprospect of NIRS is fully discussed and put forward in the end.
Drug Compounding ; standards ; Drugs, Chinese Herbal ; administration & dosage ; analysis ; standards ; Injections ; Quality Control ; Reproducibility of Results ; Spectroscopy, Near-Infrared ; methods

OBJECTIVETo explore the correlation of the gene polymorphisms of Toll-like receptor 2 ( TLR2) and TLR4 with the susceptibility and recurrence of condyloma acuminatum (CA).

METHODSUsing Snapshot, we detected the gene polymorphisms of TLR2 597(T/C), 1350(T/C), 15607(A/G), and 2258(G/A) and TLR4 896(A/G) and 1196(C/T) in the peripheral blood of 140 CA patients and 105 HPV-negative controls. We made comparisons between the CA patients and controls as well as between the cases of recurrent CA and those of non-recurrence at 6 months after treatment.

RESULTSThere were 72, 48, and 20 cases of genotype TT, TC, and CC of TLR2 597 (T/C), respectively, in the CA patients, as compared with 71, 31, and 3 cases in the controls. The gene frequency of mutant C was 31. 43% in the patients, significantly higher than 17.62% in the controls (χ2 = 12.04, P < 0.01), and it was 38.68% in the recurrent cases, remarkably higher than 27.01% in the non-recurrent cases (χ2 = 4.16, P < 0.05). There were 74, 49, and 17 cases of genotype TT, TC, and CC of TLR2 1350( T/C), respectively, in the CA patients, as compared with 73, 29, and 3 cases in the controls. The gene frequency of mutant C was 29. 64% in the patients, significantly higher than 16. 67% in the controls (χ2 =11.05, P < 0.01), and it was 36.79% in the recurrent cases, markedly higher than 25. 29% in the non-recurrent cases (χ2 = 4.18, P < 0.05). There were 44, 66, and 30 cases of genotype AA, AG, and GG of TLR2 15607(A/G), respectively, in the CA patients, as compared with 26, 58, and 21 cases in the controls. There was no significant difference in the gene frequencies of mutant G between the two groups (χ2 = 0.33, P > 0.05). No mutant genes of TLR2 2508 (G/A) or TLR4 896(A/G) and 1196(C/ T) were detected in either the CA patients or the controls. Linkage disequilibrium analysis showed a tight linkage between TLR2 597 (T/C) and 1350(T/C) (D' = 1, r2 = 0.93).

CONCLUSIONTLR2 597(T/C) is tightly linked to 1350(T/C), which is correlated with both the susceptibility and the recurrence of condyloma acuminatum.

Aged ; Case-Control Studies ; Condylomata Acuminata ; genetics ; Gene Frequency ; Genetic Linkage ; Genetic Predisposition to Disease ; Genotype ; Humans ; Polymorphism, Genetic ; Recurrence ; Toll-Like Receptor 2 ; genetics ; Toll-Like Receptor 4 ; genetics

During the washing process of coarse bear gall powder extracts, it is necessary to adjust the amount of ethyl acetate according to the properties of raw materials, which aims to improving the yield and purity of the final product. In the research, using NIR spectra to reflect the comprehensive properties of coarse bear gall powder extracts, the process is optimized in a flexible way. Forty batches experiments are designed according to the weight ratio of ethyl acetate and coarse extracts of bear gall powder. The NIR spectra of the coarse extracts of bear gall powder are collected and processed using principal component analysis (PCA) method. The first 8 principal components combined with the amount of the ethyl acetate are used as the input variables, and calibration models are established to predict the yield and purity of the final product 30 batches are used as calibration set, which is used to establish the models, and other 10 batches are used as validation set, which is used for the performance appraisal of the established models. The correlation coefficients of the calibration, inner cross-validation and external validation for the purity model are 0.902, 0.896 and 0.883, respectively, and the RMSEC, RMSECV and RMSEP are 1.22%, 1.48% and 1.59%, respectively. The correlation coefficients of the calibration, inner cross-validation and external validation for the yield model are 0.921, 0.859 and 0.916, respectively, and the RMSEC, RMSECV and RMSEP are 1.39%, 1.65% and 1.53% respectively. This work demonstrated that NIR spectra combined with technology parameter could be used to predict the yield and purity of the final product. Using the established models, the most appropriate amount of the ethyl acetate can be determined according to the properties of the coarse bear gall powder extracts, and the yield and purity of the final product can be improved.
Acetates ; chemistry ; Animals ; Gallbladder ; chemistry ; Medicine, Chinese Traditional ; Powders ; chemistry ; Principal Component Analysis ; methods ; Spectroscopy, Near-Infrared ; methods ; Ursidae

Objective:To report the clinical, pathological, electrophysiological and genic characteristics of a patient with familial amyloidosis Finnish type.Methods:The clinical characteristic of a 60-year-old female who admitted to Beijing Tiantan Hospital, Capital Medical University in June 2020 was analyzed. Meanwhile, the patient underwent electrophysiological examination, biopsy of labial gland, rectum and skin and gene sequencing analysis.Results:The patient presented left facial paralysis at the age of 50, right facial paralysis and thickening of lips at the age of 55, dysarthria and dysphagia at the age of 56. Physical examination of the patient showed signs of cranial nerves involvement and skin thinning and smoothness. Slit lamp showed corneal lattice dystrophy. Electrophysiological findings of the patient suggested bilateral carpal tunnel syndrome. Latencies were prolonged in bilateral visual evoked potential P100. The deep sensory conduction pathways in bilateral C 7 to biparietal and T 12 to biparietal cortex were abnormal. Pathology of the three biopsies of the patient showed the presence of amyloid deposition in the basement membrane around the glands. The heterozygous mutation of c.654 G>T in exon 4 of gelsolin (GSN) gene in the patient resulted in Asp187 Tyr mutation (p.D187Y). Conclusions:The patient with familial amyloidosis Finnish type was characterized by slowly progressive multiple group cranial neuropathy accompanied by corneal lattice dystrophy and skin changes. Optic nerve and spinal cord posterior funiculus sensory conduction pathway and D187Y mutation of GSN gene were involved.

OBJECTIVETo investigate the effects of total flavonoids of Litsea Coreana (TFLC) on the gap junction (GJ) intercellular communication in TM3 testicular Leydig cells and whether TFLC can reduce the cytotoxicity of oxaliplatin (OHP) in vitro.

METHODSWe detected the effect of TFLC on the dye spread of the in vitro cultured TM3 cells by parachute assay, observed changes in the expression of connexin 43 (Cx43) total protein in the TFLC-treated TM3 cells by Western blot, and determined the effects of TFLC on the expression of Cx43 on the membrane of the TM3 cells by immunofluorescence assay and on the cytotoxicity of OHP by MTT assay.

RESULTSTFLC obviously enhanced the GJ function with the increasing of the TFLC concentration in the TM3 cells. Western blot and immunofluorescence assay confirmed that TFLC significantly enhanced the expression of Cx43 total protein and Cx43 expression on the membrane of the TM3 cells. MTT assay showed that at a high cell density (confluent with GJ formation), 20 microg/ml TFLC enhanced the GJ function of the TM3 cells and reduced the cytotoxicity of OHP (P < 0.05), while at a low density (preconfluent with no GJ formation), TFLC exhibited no effect on the cytotoxicity of OHP (P > 0.05).

CONCLUSIONTFLC increases the Cx43 expression and GJ function in normal TM3 Leydig cells, and the enhancement of GJ function reduces the cytotoxicity of OHP.

Antineoplastic Agents ; toxicity ; Cell Communication ; drug effects ; physiology ; Cell Count ; Connexin 43 ; metabolism ; Flavonoids ; pharmacology ; Gap Junctions ; drug effects ; Humans ; In Vitro Techniques ; Leydig Cells ; drug effects ; ultrastructure ; Litsea ; chemistry ; Male ; Organoplatinum Compounds ; antagonists & inhibitors ; toxicity ; Proteins ; metabolism

The high price of the reference substances is an obstacle for the HPLC analysis of Lonicerae Japonicae Flos. To solve this problem, a new method based on the standard reference extract (SRE) was proposed. In this study, the extract of Lonicerae Japonicae Flos was calibrated, and the long-term stability was investigated. Different concentration solutions of SRE were prepared for establishment of the calibration profiles, and 6 organic acids were determined. T-test was used for the comparison of the determination results via reference substances and SRE, and the results demonstrated that there is no significant difference between the two methods. The presented method can be used for the quality control of Lonicerae Japonicae Flos, and will also offer reference to resolve similar problems.
Flowers ; chemistry ; Lonicera ; chemistry ; Plant Extracts ; standards ; Quality Control ; Reference Standards

OBJECTIVETo establish a method of quantitative analysis of multi-components by single marker(QAMS) for quality control of Lonicerae Japonicae Flos.

METHODSThe contents of chlorogenic acid(CA) and caffeic acid(CfA) were determined, and the relative correction factors(RCF) of other organic acids were calculated, which were used for the indirect determination.

RESULTSThe RCFs for the neochlorogenic acid(NCA), 3, 4-O-dicaffeoylquinic acid(3, 4-DCA), 3, 5-O-dicaffeoylquinic acid(3, 5-DCA), and 4, 5-O-dicaffeoylquinic acid(4, 5-DCA) were 5.462, 5.689, 2.313, 2.382(to CA) and 3.941, 4.103, 1.669, 1.718(to CfA), respectively. The established method was validated in different laboratories with different high performance liquid chromatography(HPLC) instruments and different chromatographic columns; the result indicated that the reproducibility was satisfactory. There was no significant difference between the established QAMS method and external reference method (P>0.05).

CONCLUSIONThe established QAMS method can be used for simultaneous determination of 6 organic acids as quality control of Lonicerae Japonicae Flos with easy available standard substances.

Caffeic Acids ; analysis ; Chlorogenic Acid ; analysis ; Chromatography, High Pressure Liquid ; methods ; Lonicera ; chemistry ; Quality Control ; Quinic Acid ; analysis ; Reproducibility of Results

OBJECTIVETo determine the stress distribution on endplate after lumbar prosthetic disc nucleus (PDN) replacement.

METHODSSix fresh lumbar vertebrae with normal Modic classification were harvested. The specimens were used to establish L4-5 intact, nucleotomy, prosthetic nucleus pulposus replacement models. Vertical compression tests were performed with MTS machine at the rate 50 N per second to maximum load of 1300 N. The stress under the endplate were measured directly with accurate pressure sensors.

RESULTSFor intact specimens, the stress on the endplate maintained higher in the central zone of the endplate, and decreased gradually to the periphery, and was well-distributed. After nucleotomy, the stress on the central zone of endplate was significantly decreased, and increased stress occurred in the periphery of endplate. After PDN replacement, the stress on the central zone of endplate was found more 15.1% higher than that in intact disc (P < 0.05), and the neighboring zone also showed higher stress measurements.

CONCLUSIONSAfter lumbar prosthetic disc nucleus replacement, the stress concentration on endplate may occur in the central zone of prosthetic disc nucleus insertion. Therefore, the prosthetic nucleus pulposus with suitable shape, proper biomechanical functions and updated materials need further study.

Adult ; Arthroplasty, Replacement ; Cartilage, Articular ; physiology ; Humans ; Intervertebral Disc ; surgery ; Joint Prosthesis ; Lumbar Vertebrae ; surgery ; Middle Aged ; Stress, Mechanical

Design space approach is applied in this study to enhance the robustness of first ethanol precipitation process of Codonopsis Radix (Dangshen) by optimizing parameters. Total flavonoid recovery, dry matter removal, and pigment removal were defined as the process critical quality attributes (CQAs). Plackett-Burman designed experiments were carried out to find the critical process parameters (CPPs). Dry matter content of concentrated extract (DMCE), mass ratio of ethanol to concentrated extract (E/C ratio) and concentration of ethanol (CEA) were identified as the CPPs. Box-Behnken designed experiments were performed to establish the quantitative models between CPPs and CQAs. Probability based design space was obtained and verified using Monte-Carlo simulation method. According to the verification results, the robustness of first ethanol precipitation process of Dangshen can be guaranteed by operating within the design space parameters. Recommended normal operation space are as follows: dry matter content of concentrated extract of 45.0% - 48.0%, E/C ratio of 2.48-2.80 g x g(-1), and the concentration of ethanol of 92.0% - 92.7%.
Chemical Precipitation ; Chemistry, Pharmaceutical ; methods ; Codonopsis ; chemistry ; Drugs, Chinese Herbal ; chemistry ; isolation & purification

BACKGROUNDThe goal of total knee arthroplasty (TKA) is to restore knee kinematics. Knee prosthesis design plays a very important role in successful restoration. Here, kinematics models of normal and prosthetic knees were created and validated using previously published data.

METHODSComputed tomography and magnetic resonance imaging scans of a healthy, anticorrosive female cadaver were used to establish a model of the entire lower limbs, including the femur, tibia, patella, fibula, distal femur cartilage, and medial and lateral menisci, as well as the anterior cruciate, posterior cruciate, medial collateral, and lateral collateral ligaments. The data from the three-dimensional models of the normal knee joint and a posterior-stabilized (PS) knee prosthesis were imported into finite element analysis software to create the final kinematic model of the TKA prosthesis, which was then validated by comparison with a previous study. The displacement of the medial/lateral femur and the internal rotation angle of the tibia were analyzed during 0-135° flexion.

RESULTSBoth the output data trends and the measured values derived from the normal knee's kinematics model were very close to the results reported in a previous in vivo study, suggesting that this model can be used for further analyses. The PS knee prosthesis underwent an abnormal forward displacement compared with the normal knee and has insufficient, or insufficiently aggressive, "rollback" compared with the lateral femur of the normal knee. In addition, a certain degree of reverse rotation occurs during flexion of the PS knee prosthesis.

CONCLUSIONSThere were still several differences between the kinematics of the PS knee prosthesis and a normal knee, suggesting room for improving the design of the PS knee prosthesis. The abnormal kinematics during early flexion shows that the design of the articular surface played a vital role in improving the kinematics of the PS knee prosthesis.

Adult ; Arthroplasty, Replacement, Knee ; methods ; Biomechanical Phenomena ; Female ; Humans ; Knee Prosthesis