No abstract available.
Temporomandibular Joint*

No abstract available.
Adolescent* ; Epidemiologic Studies* ; Humans ; Temporomandibular Joint*

No abstract available.
Temporomandibular Joint*

Since Whitehead had described a circular hemorrhoidectomy in 1882, many surgeons adopted it for decades for patients with protruding anal deformity. After a few decades of performing Whitehead operation, devastating complications such as anal stricture, fecal incontinence, and wet anus with mucosal eversion had been reported on the literatures and then it was buried as an abandoned procedure by surgeons for a long period. Recently, a few prominent anal surgeons reported that they could avoid such devastating complications by introducing diverse modifications of the original Whitehead's operation. The authors analyzed 22 patients who had undergone original Whitehead circular hemorrhoidectomy with the technique of preserving most of the perianal skin and W-shaped circular incision during the period from 1991 to 1996, with special regard to the com plications such as anal stricture and anal mucosal eversion which have been debated on so far and reviewed the articles about these issues. In immediate postoperative period, suture failure and resultant non-surgery requiring, mild anal stricture were documented in 3 of the 22 cases(13.6%). On long-term follow-up with the mean period of 44 months (18~79 months) in 14 cases, except those 8 cases that were lost, with phone-call questionaire, 13 patients(93%) had quite normal anal functions. The authors would like to suggest that the original Whitehead's circular hemorrhoidec tomy is a valuable surgical technique to manage the protruding anal deformity if surgeons can avoid well known complications such as anal stricture and anal mucosal eversion by choosing a correct location of initial W-shaped incision to preserve as much perianal skin as possible.
Anal Canal ; Congenital Abnormalities ; Constriction, Pathologic ; Fecal Incontinence ; Follow-Up Studies ; Hemorrhoidectomy* ; Humans ; Postoperative Period ; Skin* ; Sutures

BACKGROUND: Total intravenous anesthesia with propofol can cause respiratory depression and apnea especially during induction of anesthesia. To study the possibility of reversal of respiratory depression during anesthesia with propofol, pretreated with nabuphine or not, the respiratory effects of doxapram to spontaneously ventilating patients were investigated. METHODS: Patients were divided into 4 groups - saline-propofol-saline group (SPS), saline-propofol- doxapram group (SPD), nalbuphine-propofol-saline group (NPS), and nalbuphine-propofol-doxapram group (NPD). After saline or nalbuphine pretreatment, anesthesia was induced with propofol and then doxapram or saline was intravenously injected. Apneic time interval, blood pressure, heart rate, respiratory rate, minute ventilation, end tidal CO2 partial pressure and oxygen saturation were measured in every minutes during induction of anesthesia. Percent changes of each values were compared. RESULTS: There is no differences in apneic time intervals in each groups. The percent change of first minute ventilation in SPD group after doxapram injection unchanged significantly compared with those depressions of SPS, NPS and NPD group (p<0.05). Respiratory rates increased in SPD and SPS groups after laryngeal mask insertion. There is no differences in minute ventilation, respiratory rate and end-tidal CO2 concentration between nalbuphine pretreated groups regardless of doxapram injection. CONCLUSIONS: Doxapram has effect in increasing minute ventilation after propofol induction within first few minutes, but it cannot reverse respiratory depression during propofol induction pretreated with nalbuphine.
Anesthesia ; Anesthesia, Intravenous* ; Apnea ; Blood Pressure ; Depression ; Doxapram* ; Heart Rate ; Humans ; Laryngeal Masks ; Nalbuphine* ; Oxygen ; Partial Pressure ; Propofol* ; Respiratory Insufficiency ; Respiratory Rate ; Ventilation

No abstract available.
Humans ; Temporomandibular Joint Disorders* ; Temporomandibular Joint*

Soft tissue related complications are quite frequent in limb lengthening. Muscle fibers may proliferate or regenerate after stretching injury over 10-20% of their original length. However, the cells which are engaged in this phenomenon are not confirmed yet. We chased the S-phase cells (phase for DNA replication) in the posterior leg muscle during limb lengthening by immunohistochemical technique. We lengthened the tibiae of fifteen New Zealand white rabbits. We divided them into three groups and each group is consisted of five rabbits. In group 1, we lengthened the left tibiae by 10% of their original length, in Group 2, 20%, and in group, 3, 25%, respectively, At the end of lengthening posterior muscles of lengthened left side and of controlled right side were fixed and processed for Immunohistochemical staining which could detect the incorporation of bromodeoxyuridine(BDU). Labelling index(LI:% of positively stained S-phase nuclei) of group 1 was zero. LI of groups for more than 20% lengthening (sum of group 2 and 3) was statistically significant. In conclusion, nuclei around or within the muscle tissue are in S-phase during limb lengthening which means proliferation of the muscle fivers or of the certain cells that abut muscle fibers.
Bromodeoxyuridine ; DNA ; Extremities ; Immunohistochemistry ; Leg ; Muscles ; Rabbits ; Tibia

This study is to analyze the stress and displacement on the jaws during the bilateral and unilateral clenching task on three dimensional finite element model of the dentated skull. For this study, the computed tomography(G.E.8800 Quick, USA) was used to scan the total length of human skull in the frontal plane at 1.9mm intervals. The CAD data were extracted from the tomograms through digitizer(Summa Sketch III,USA) and then reconstructed by means of the spline method in the CAD program. In this project, a commercial software I-DEAS(Master Series version 3.0, SDRC Inc, USA) was used for three-dimensional stress analysis on the finite element model. which consists of articular disc, maxilla, mandible, teeth, periodontal ligament and cranium. The results are as follows. ; 1. During the bilateral clenching, each major muscle forces caused high stresses on various areas of skull: masseter muscle on articular disc and teeth; temporal muscle on mandible and periodontal ligament; medial pterygoid muscle on the temporomandibular joint. During the unilateral clenching, masseter muscle induced the maximum stress; medial pterygoid muscle the minimum stress. 2. During the bilateral clenching, higher compressive stresses on articular disc were generated by the masseter muscle and higher deformation occurred on the most front outer sites. And during the unilateral clenching, temporal muscle and medial pterygoid muscle exerted their forces to twist temporomandibular joint area of the balancing side and induced a higher compressive stresses on the front outer sites of articular disc. 3. During the bilateral clenching, the masseter muscle bended the mandible outwardly, and then caused tensile stresses on the lingual surface of mandibular symphysis. And the medial pterygoid muscle caused tensile stresses on the labial surface of mandibular symphysis. 4. When each muscles were simultaneously applied on jaws, a high stress and displacement took place on mandible rather than on the maxilla.; Also, a high stress and displacement took place during the unilateral clenching rather than during the bilateral clenching.
Humans ; Jaw* ; Mandible ; Masseter Muscle ; Maxilla ; Muscles ; Periodontal Ligament ; Pterygoid Muscles ; Skull ; Temporal Muscle ; Temporomandibular Joint ; Tooth

Recently a new generation of crown and bridge veneering resins containing submicron glass fillers was introduced. These ultrasmall particle hybrid composite materials distinguish themselves, compared with conventional microfill crown and bridge resins, through improved mechanical properties. It is claimed that these composites are suitable for metal free crowns and even bridges using fiber reinforcement. The purpose of this study was to evaluate the effect of thermal cycling on the tensile strength of the following veneering composites: Artglass(Heraeus Kulzer Co., Wehrheim, Germany), Estenia(Kuraray Co., Japan), Sculpture(Jeneric Pentron Co., Wallingford, U.S.A.), and Targis(Ivoclar Co., Schaan Liechenstein). According to manufacturer' s instructions, rectangular tensile test specimens measuring 1.5 x 2.0 x 4.5 mm were made using a teflon mold. Whole specimens were divided into two groups. One group was dried in a desiccator at 25C for 10 days, and another group was subjected to thermal cycling(10,000 x) in water(5/55 10. All test specimens were placed in a universal testing machine and loaded until fracture with a crosshead speed of 0.5mm/min. Weibull analysis and Tukey s test were used to analyze the data. The fracture surfaces of specimens were observed in SEM and the aliphatic C=C absorbance peak of Estenia and Targis resin was analyzed using Fourier transform infrared(FTIR) spectroscopy. Within the limitations imposed in this study, the following conclusions can be drawn 1. Both in drying condition and, thermal cycling condition, the highest tensile strength was observed in Estenia testing group(p<0.05). 2. The strength data were fit to single-mode Weibull distribution, and the Weibull modulus of all veneering composite resin specimens increased after thermal cycling treatment. 3. After thermal cycling test, the highest tensile strength was observed in the Estenia group, and the lowest value was observed in the Targis group. The tensile strength values showed the significant differences between each group(p<0.05). 4. The aliphatic C = C absorbance peak of Estenia and Targis resin was decreased after light curing, and there was no distinct change after thermal cycling.
Composite Resins* ; Crowns* ; Fourier Analysis ; Fungi ; Glass ; Polytetrafluoroethylene ; Silicone Elastomers ; Spectroscopy, Fourier Transform Infrared ; Spectrum Analysis ; Tensile Strength*

The resin : metal interface is at the basis of most bonding failures in resin-bonded prosthesis. Although debonding has been a problem with adhesive fixed partial dentures, various dentists classify them as long-term restorations. The advantages of resin-bonded fixed partial dentures include minimal tooth reduction and the possibility of rebonding . if resin-bonded protheses can be easily rebounded, it is of clinical importance to know if the lutingagents rebond as well the second time as they did originally. Several retentive systems for resin-to-metal bonding have recommended. Treatments such as electrolytic etching and silicone coating, despite the good result of bond strength, have proved to be time-consuming and technique-sensitive. Therefore a simple and more reliable method is desirable. This study evaluated the effect of metal surface treatments on the rebond strength of panavia 21cement to a nickel-chromium(Ni-Cr) alloy. The samples were received the following surface treatments : Group No.1(control or served as the control) treatment with sandblasting with 50um aluminum oxide and ultrasonically cleaned for 10minutes in double-deionized water, Group No.2 were no surface treatments. Group No.3 were treated with metal primer. Group No.4 were treated with sandblasting as previously described, and then metal priming. From the analysis of the results, the following conclusions were drawn: 1. Sandblasting and metal priming appears to be an effective method for treatment of metal after accidental debonding. 2. Group without surface treatment had significantly lower bond strengths compared with other groups. 3. The combination of sandblasting and metal priming may not develop superior bonding strengths compared with other techniques that used the Ni-Cr alloys. 4. Combination of cohesive and adhesive failures were the most common type observed. The results support the use of sandblasting as a viable procedure when rebonding accidentally lost adhesive partial denture. We concluded that sandblsting and metal priming of metal surface before bonding could provide the adequate bond strength during rebonding of resin-bonded fixed partial denture.
Adhesives ; Alloys ; Aluminum Oxide ; Dentists ; Denture, Partial ; Denture, Partial, Fixed ; Denture, Partial, Fixed, Resin-Bonded ; Humans ; Prostheses and Implants ; Silicones ; Tooth ; Water