Child ; Female ; Humans ; Lymphoma, Extranodal NK-T-Cell

OBJECTIVE: To investigate the resistance phenotype of acinetobacter baumannii and the expression of ade efflux pump gene. METHODS: Non-repetitive 51 strains of Acinetobacter baumannii were collected in Peking Union Medical Hospital between Feb. 2004 and Feb. 2005. The active efflux system adeB structural gene and sequence were identified by PCR. RESULTS: The tested strains were not susceptible to common broad-spectrum antibiotics. Multidrug resistant Acinetobacter baumannii carried adeB active efflux pump gene. CONCLUSION: The multiple-drug resistance of Acinetobacter baumannii is independent of ?-lactamase. It maybe related to other drug resistance mechanism. The effect of active efflux system is possibly one of the major mechanisms of multidrug resistance of acinetobacter baumannii.

OBJECTIVETo study the pathogen of opium poppy downy mildew and its biological characteristic for further research on the disease.

METHODDevelopment of the disease was observed systematically in the field. Germination rate of sporangium in different temperature, pH and nutrition was examined with suspending-drop method. Slide-germination method was used to observe its germination in different humidity maintained by different concentration of H2SO4.

RESULT AND CONCLUSIONThe disease manifests itself in two forms: severely infected plants (systematic infection) and leaf spots (nonsystematic infection). Sporangia of the pathogen are oval or globular, thin walled, smooth, hyaline, with 7.74-16.34 microns diameter in base 1 and 8.34-15.05 microns in base 2.0 ospores are light yellow with 33.87-70.54 microns x 19.34-62.64 microns in base 1 and 36.85-49.68 microns x 42.08-55.76 microns in base 2. Conidiophores are stout, erect, whose branching times and length are different between those in base 1 and those in base 2. Sporangia sprot directly in two hours. Film of water is necessary for sporangium to sprot. The optimum temperature range of sporangium sprot is 12-21 degrees C, the best being 16 degrees C, the pH range is 4.53-9.18 the best optimum at pH 7.38, and the extract of leaf of 1:5 is good for its germination.

Humidity ; Hydrogen-Ion Concentration ; Oomycetes ; growth & development ; ultrastructure ; Papaver ; microbiology ; Plant Diseases ; microbiology ; Spores, Fungal ; growth & development ; ultrastructure ; Temperature

OBJECTIVETo screen effectual fungicides for field control because of the seriousness of opium poppy mildew and importance of chemical control on plant diseases.

METHODSeven fungicides were screened in Lab experiment and field test during 1996-1997.

RESULT AND CONCLUSIONAll of them and their different dosages were effective to control conidia of Peronospora arborescens. Among them, 72.2% propamocarb of 1203 and 902.5 ppm were the most effective both in Lab experiment and field test with efficacy 79.91% and 79.33% respectively in field test, and the efficacy of other fungicides was over 50%. Seven fungicides tested can be used to control nonsystematic symptom of opium poppy mildew.

Carbamates ; pharmacology ; Fungicides, Industrial ; pharmacology ; Oomycetes ; drug effects ; pathogenicity ; Papaver ; microbiology ; Plant Diseases ; microbiology ; Plants, Medicinal ; microbiology

OBJECTIVETo measure and evaluate the personal noise exposure of cold rolling mill workers by using noise dosimeter.

METHODSAccording to job category and work type, all workers were divided into 11 groups. 3 to 5 day shift (8:00 to 16:00) workers from each group were selected as subjects for personal noise exposure measurement. SH-126 dosimeters were worn by each subject and collect noise data by a phone fix at collar. All subjects were asked to take notes about their working activities when they were wearing SH-126 dosimeters. Each worker's L(A)(eq) of 8 hours, geometric mean and range of each group were computed.

RESULTSThere were many noise sources in the workshop. Recorded data showed that noise exposure of cold rolling mill was unstable. The varieties of personal noise levels were quite large. Among 53 workers, the highest noise exposure level was 100.0 dB (A), the lowest was 81.2 dB (A); the highest work type was of the foreside welders [94.20 dB (A)], and the lowest was of the straight-cutters [89.02 dB (A)]; quality checkers had the biggest rang [16.3 dB (A)], and primary rolling workers had the lest [2.3 dB (A)].

CONCLUSIONNoise exposure of all the 11 groups were more than 85 dB (A). Noise protection of these workers should be improved. It suggested that measuring personal noise exposure individually with dosimeters might obtain the noise exposure level more integrally in the complicated environment.

Environmental Monitoring ; methods ; statistics & numerical data ; Humans ; Noise, Occupational ; prevention & control ; statistics & numerical data ; Occupational Exposure ; prevention & control ; statistics & numerical data

BACKGROUNDNoise is widespread occupational hazard in iron and steel industry. Overhead-traveling cranes are widely used in this industry, but few studies characterized the overhead-traveling crane drivers' noise exposure level so far. In this study, we assessed and characterized personal noise exposure levels of overhead-traveling crane drivers in two steel-rolling mills.

METHODSOne hundred and twenty-four overhead-traveling crane drivers, 76 in the cold steel-rolling mill and 48 in the hot steel-rolling mill, were enrolled in the study. Personal noise dosimeters (AIHUA Instruments Model AWA5610e, Hangzhou, China) were used to collect full-shift noise exposure data from all the participants. Crane drivers carried dosimeters with microphones placed near their collars during the work shifts. Work logs had been taken by the drivers simultaneously. Personal noise exposure data were divided into segments based on lines in which they worked. All statistical analyses were done using SPSS 13.0.

RESULTSThe average personal noise exposure (L(Aeq.8h)) of overhead-traveling crane drivers in the hot steel-rolling mills ((85.03 +/- 2.25) dB (A)) was higher than that in the cold one ((83.05 +/- 2.93) dB (A), P < 0.001). There were 17 overhead traveling cranes in the hot steel-rolling mill and 24 cranes in the cold one, of which carrying capacities varied from 15 tons to 100 tons. The average noise exposure level based on different lines in the hot and cold steel-rolling mills were (85.2 +/- 2.61) dB (A) and (83.3 +/- 3.10) dB (A) respectively (P = 0.001), which were similar to the average personal noise exposure in both mills. The noise exposure levels were different among different lines (P = 0.021).

CONCLUSIONNoise exposure levels, depending upon background noise levels and the noise levels on the ground, are inconstant. As the noise exposure levels are above the 85 dB (A) criteria, these drivers should be involved in the Hearing Conservation Program to protect their hearing.

Environmental Monitoring ; instrumentation ; methods ; statistics & numerical data ; Female ; Humans ; Male ; Noise, Occupational ; Noise, Transportation ; Occupational Exposure ; analysis ; statistics & numerical data ; Occupational Health ; statistics & numerical data ; Steel

OBJECTIVETo explore an appropriate measure to repair tissue defects and deformities in mandibulo-cervical region.

METHODSEighteen cases with severe tissue defects and deformity in jaw and neck were repaired with thoracic skin flap with multiple blood supply system in our unit from Jan. 2006 to Nov. 2008. Anterior cutaneous branch of transverse cervical artery, intercostal branch of internal thoracic artery and lateral thoracic artery were included in the pedicles.

RESULTSAll skin flaps survived, except in one patient in whom a small belb appeared at the distal end of the island flap with anterior cutaneous branch of transverse cervical artery, and it was healed after a few dressing changes. The functions and appearances were satisfactory after 6-month to 2-year follow-up, without showing secondary deformity.

CONCLUSIONSThe blood supply of thoracic skin flap is abundant and constant, which is an ideal method for repair of tissue defects and deformities in jaw and neck after taking into account some factors, such as the demand of the patient, general physical condition, and the size of the defect.

Adolescent ; Adult ; Child ; Female ; Humans ; Male ; Middle Aged ; Neck ; abnormalities ; surgery ; Reconstructive Surgical Procedures ; methods ; Skin ; blood supply ; Skin Transplantation ; methods ; Surgical Flaps ; blood supply ; Thoracic Wall ; surgery ; Wound Healing ; Young Adult

OBJECTIVETo study the biological properties of human dental pulp cells (HDPC) by cloning and analysis of genes differentially expressed in HDPC in comparison with human gingival fibroblasts (HGF).

METHODSHDPC and HGF were cultured and identified by immunocytochemistry. HPDC and HGF subtractive cDNA library was established by PCR-based modified subtractive hybridization, genes differentially expressed by HPDC were cloned, sequenced and compared to find homogeneous sequence in GenBank by BLAST.

RESULTSCloning and sequencing analysis indicate 12 genes differentially expressed were obtained, in which two were unknown genes. Among the 10 known genes, 4 were related to signal transduction, 2 were related to trans-membrane transportation (both cell membrane and nuclear membrane), and 2 were related to RNA splicing mechanisms.

CONCLUSIONThe biological properties of HPDC are determined by the differential expression of some genes and the growth and differentiation of HPDC are associated to the dynamic protein synthesis and secretion activities of the cell.

Cloning, Molecular ; Cloning, Organism ; Dental Pulp ; Fibroblasts ; Gene Library ; Gingiva ; Humans ; Polymerase Chain Reaction

OBJECTIVE To investigate the surgical methods for the lesions involved the common carotid artery.METHODS The clinical data of 11 cases with lesions involved the common carotid artery who underwent operations were retrospectively studied.The lesions were 1 case with recurrence tumor after 3/4 partial laryngectomy,1 case with bleeding of the carotid aneurysm caused by tuberculosis,1 case with iatrogenic carotid aneurysm,3 cases with carotid body tumor,1 case with thyroid gland cancer,2 cases with neck tumor,1 case with injury of the carotid artery and 1 case with gas gangrene.RESULTS Common carotid artery was reconstructed in 2 cases after removal of the tumors.The tumors were resected using the carotid shunt in 2 cases.Common carotid artery was sutured in 1 case with neck injury.The common carotid artery was repaired in 1 case with iatrogenic carotid aneurysm after removal of the tumor.The carotid artery was dissected out from the thyroid gland cancer in 1 case.The common carotid artery was reserved in 2 cases after resection of the neck tumors. Neck drainage was performed in the case with gas gangrene.CONCLUSION The surgical methods for lesions involved the carotid artery after removal of the tumors include the reconstruction of the carotid artery, resection and suture the carotid artery,and free of the carotid artery from the tumors.

OBJECTIVETo examine vibrio cholera (V.C) in aquatic products of littoral area, Zhejiang Province and to provide scientific evidence for administration of aquatic products and cholera epidemic control.

METHODSAll 990 samples of aquatic products collected from local markets, eateries and aquafarms in three chosen areas. Samples were proliferated in alkaline liquid medium, and purified in NO: 4 medium, the isolations were identified biochemically, and phenotype of strains were defined by phagocyte and coagulation with V.C. diagnostic serum. Three virulence genes (ctx, ace, zct) of the isolated strains were detected by polymerase chain reaction (PCR).

RESULTSThere were 1.41% samples caught by V.C., having a carrying rate highest in turtles of 8.9%. 14 strains were defined as three serogroups, and the numbers of Inaba, Ogawa, and Hikojima types were 2, 2, 10 respectively. Virulence genes had detected in 9 of 12 stains. All genes were detected in 5 strains, only ZOT genes in 3 strains, and both CTX and ACE genes in 1 strain.

CONCLUSIONSAquatic products from inshore in Zhejiang Province caught with V.C. strains might be divided into three serogroups. Most of them should be virulence genes. Cholera epidemic outbreak might be caused by those contaminated products.

China ; Food Microbiology ; Genes, Bacterial ; Seafood ; microbiology ; Vibrio cholerae ; genetics ; isolation & purification ; Virulence Factors ; genetics