For the improvement of denture fitness of changed residual ridge, denture liner can be used. Denture liner should be very stable physically in various environments of the mouth as well as be bonded strongly with denture resin. In this study, the specimens bonded with four kinds of soft denture liner and three kinds of hard denture liner were used to test the physical properties of the liners. All experimental groups were stored in 37+/-1degrees C distilled water for 24hours, followed by thermocycling between 15degrees C and 45degrees C with 15 second dwell time. 1000, 2000, 3000 cycles of thermocycling were excuted and physical properties were measured by Instron Universal Testing Machine. The obtained results were as follows: 1. In tensile bond test of soft liners, it was shown that both of Molloplast-B(R) specimens before and after thermocycling had the highest tensile strength, and in case of hard liners, Dura-liner II(R)speimen had the highest tensile strength before and after thermocycling. Depending on thermocycling, Soft-Relining(R), Denture-Relining(R),Molloplast-B(R), Coe-soft(R) and Kooliner(R) specimen showed significant difference(p<0.05). 2. In strain test of soft liners, it was shown that Molloplast-B(R) specimen before thermocycling and the Coe-soft(R) after thermocycling showed highest results, and in case of hard liners, the Dura-Liner II(R) speimen before and after thermocycling had the highest result. Depending on thermocycling. Denture-Relinig(R). Molloplast-B(R) and Dura-Lner II(R) specimen showed significant difference(p<0.05). 3. In Maximum distance test of soft liners, the Molloplast-B(R) specimen before thermocycling and the Coe-soft(R) after thermocycling showed highest results, and in case of hard liners, the Dura-Liner II(R) specimen before and after thermocycling showed highest results. Depending on thermocycling, Denture-Relining(R), Molloplast-B(R) specimens showed significant difference(p<0.05). 4.In elasticity test of soft liners , the Molloplast-B(R) specimen before and after thermocycling showed highest results, and in case of hard liners, the Dura-Liner II(R) specimen before thermocycling and the Tokuso-Rebase (R) after thermocycling showed highest results. Depending on thermocycling, Soft-Relining(R) , Molloplast-B(R) specimens showed significant difference(p<0.05).
Denture Liners* ; Dentures* ; Elasticity ; Mouth ; Tensile Strength ; Water

As is well known, myxoma of the heart is very rare(incidence 0.03%), constituting nearly 50% of all primary cardiac tumors. It is important because it can be abolished by surgical removal but usually fatal if unrecognized or untreated. Recently a wider use of echocardiogram as the screening test of valve lesions can be expected to increase the number of myxomas found preoperatively. We have experienced a case of bilateral atrial myxoma which simulated mitral valvular disease clinically and had typical three cardinal manifestations such as obstructive, embolic and constitutional symptoms. The patients was 39 years old woman. The left atrial myxoma was diagnosed preoperatively by echocardiography and cardiac angiography and the remainder during open heart surgery under the E.C.C. Both of them were removed successfuly and confirmed as typical myxoma microscopically. This is the first case report of bilateral atrial myxoma in Korea to our knowledge.
Adult ; Angiography ; Echocardiography ; Female ; Heart ; Heart Neoplasms ; Humans ; Korea ; Mass Screening ; Myxoma* ; Thoracic Surgery

Novel methods producing supplementary and prosthetic material by cutting or discharge processing via computer design have been proposed as alternatives for traditional casting methods and are being utilized for commercial purposes. The CAD/CAM system used in dentistry can be classified into three-dimensional input of target values, restoration design, and material processing. The marginal fidelity in production of In-Ceram core has important clinical implications and is a key consideration issue in CAD/CAM production as well. Through this research, the author arrived at the following conclusion after conducting comparison analysis of marginal fidelities between the In-Ceram core produced via CAD/CAM and that produced through the traditional method: 1. In the cases of mesial, distal, and lingual margins, the core margins via CAD/CAM produced lower values than those via the traditional method, but the differences were found to be statistically insignificant. 2. In the case of labial flange, the core margins via CAD/CAM produced lower values than those via the traditional method and the differences were found to be statistically significant. (p<0.05) 3. In comparision with overall marginal fidelity, the core margins via CAD/CAM produced lower values than those via the traditional method, but the differences were found to be statistically insignificant. 4. Among the core margins produced via the traditional method did not have statistically significant differences but for those produced via CAD/CAM had statistically significant differences between labial and lingual sides and between labial and mesial sides. (p<0.05)
Dentistry

PURPOSE: The objective of this study was to provide a trend analysis of the prevalence of diabetes relative to the socioeconomic, lifestyle, and physiologic risk factors among Korean adults aged over 30 years for a 10-year period using data from the Korean National Health and Nutrition Examination Survey. METHODS: Prevalence difference and the slope index of inequality were calculated for each risk factors using binomial regression by considering the repeated cross-sectional features of the data. The prevalence ratio and the relative index of inequality were calculated using log-binomial regression. Linear trend tests were performed using SAS 9.2. RESULTS: Crude prevalence of diabetes increased over the 10-year period, and was higher for men than for women. It was very high for adults 60 years or over, consistently increasing over time. The prevalence among unemployed men, women with higher level of stress, women with hypertension, and adults with serum triglyceride levels over 135 mg/dL increased over the 10-year period in comparison with the respective control group. CONCLUSION: Considering the rapid economic development and associated lifestyle changes in Korea, action should be taken to control the prevalence of diabetes by both preventing and consistently monitoring these identified risk factors using a public-health approach.
Adult ; Aged ; Alcohol Drinking ; Asian Continental Ancestry Group ; Body Mass Index ; Cholesterol/blood ; Cross-Sectional Studies ; Diabetes Mellitus, Type 2/*epidemiology/pathology ; Exercise ; Female ; Humans ; Hypertension/epidemiology ; Life Style ; Male ; Middle Aged ; Nutrition Surveys ; Prevalence ; Republic of Korea ; Risk Factors ; Smoking ; Socioeconomic Factors ; Stress, Psychological ; Triglycerides/blood ; Unemployment

Implant-supported overdenture is known as a useful appliance, instead of using the conventional complete denture, for better retention and stability. In this study 4 types of materials such as, gold bar/plastic clip(group AuP), gold bar/metal clip(group AuM), palladium bar/plastic clip(group PdP), and palladium bar/metal clip(group PdM) were used to evaluate the retention forces according to the type of clips and alloys used for bar fabrication, in the Hader bar system. Repeated insertions and removals of overdenture were conducted in each group, and the retention forces were measured and compared the data of each group according to the number of insertion and removal. The obtained results were as follows, 1. In the comparison of retention forces according to type of bar-clip, retention was increased in the order of group AuM, PdM, PdP, AuP, and the retention force of group AuM was significantly increased compared with those of others(p<0.05). 2. In the comparison of retention forces according to the number of insertion, only group PdP showed significant decrease in retention(p<0.05). 3. In the comparison of retention forces according to the type of bar and clip, there was no significant difference in the type of bar, but the retention of plastic clip was significantly higher than that of metal clip when Au bar was used(p<0.05). 4. In the observation of the bar surface, group AuM using Au bar and metal clip showed the most scratches among bar groups.
Alloys ; Denture, Complete ; Denture, Overlay* ; Palladium ; Plastics

No abstract available.
Tuberculosis, Renal*

No abstract available.
Teratoma*

BACKGROUND: Dopamine receptors have been regarded as a strong candidate involved in etiology of schizophrenia and a target for various antipsychotic drugs. The purpose of our study was to investigate whether dopamine D1 receptor(DRD1) gene polymorphisms would predict the treatment response to antipsychotics in schizophrenia. METHOD: One hundred thirty-four schizophrenic patients, who met DSM-IV criteria for schizophrenia were entered into a 48-week study. The psychopathology of the patients was assessed at baseline, 12th, 24th, 48th weeks of treatment by PANSS. Responders were defined by a 20% of the reduction in total PAnSS score at end point. The genomic DNA fragment corresponding to nucleotides of dopamine D1 receptor gene was amplified by polymerase chain reaction(PCR). RESULT: Neither allelic frequencies nor genotypes for dopamine D1 receptor differed significantly between responders and non-responders. Also, there was no difference of changes of PANSS scores among three genotype groups of the dopamine D1 receptor. CONCLUSION: Allelic variation in the dopamine D1 gene is not associated with individual differences in antipsychotic response.
Antipsychotic Agents ; Diagnostic and Statistical Manual of Mental Disorders ; DNA ; Dopamine* ; Genotype* ; Humans ; Individuality ; Nucleotides ; Psychopathology ; Receptors, Dopamine ; Receptors, Dopamine D1* ; Schizophrenia

It is indispensable to cover the skin defect when bone or tendon is exposed. In case of inevitable amputation of an extremity, it is possible to harvest a free flap from the amputed limb for providing coverage of the other wound. This technique allows immediate wound coverage without the morbidity of an additional donor site. We experienced an electrical burn case with inevitahle wrist disarticulation and successfully treated soft tissue defect of ankle using free vascularized flap.
Amputation ; Ankle* ; Burns ; Disarticulation ; Extremities ; Free Tissue Flaps ; Hand* ; Humans ; Skin ; Tendons ; Tissue Donors ; Wounds and Injuries ; Wrist

The pedicled fillet flap concept has been successfully applied in both the upper and lower extremities for the treatment of difficult wound. In cases of inevitable extremity amputation, the transfer of pedicled flap from the amputed part is possible. In such substance, it is possible to obtain the pedicled fillet flap from the amputed limb to provide stump coverage. We experienced two cases of below-knee amputation due to severe flame burn which the stump was covered with island pedicled sole-fillet flap.
Amputation Stumps* ; Amputation* ; Burns ; Extremities ; Knee* ; Lower Extremity ; Surgical Flaps ; Wounds and Injuries