Dental Bonding ; methods ; Dentin ; Dentin-Bonding Agents ; chemistry ; Electricity ; Humans

OBJECTIVEThis study aims to evaluate the bond strength of a self-adhesive resin cement to dentin by ethylene diamine tetraacetic acid (EDTA) and NaClO.

METHODSTwenty-seven freshly extracted non-carious human premolars were prepared to expose the buccal dentin and randomly divided into three groups: control group (A group), EDTA group (B group) and NaClO group (C group). All teeth were bonded to dentin using a self-adhesive resin cement after the teeth in the A group were processed with distilled water. The B and C group were processed with 3%EDTA and 1%NaClO, respectively. After 24 hours at 37 °C water, the shear bond strengths of the twenty-four specimens were measured. All statistical analysis was performed using SPSS 17.0 software package. Each fractured specimen was examined under dental microscope. Three new specimens were cut, and the morphologies of the cement-dentin interface were observed under scanning electron microscope (SEM).

RESULTSThe shear bond strength in the A group, B group and C group was (8.55±0.63), (8.47±0.56) and (12.97± 0.59) MPa, respectively. The difference between A group and B group was no statistically significant (P>0.05), whereas the difference between C group and B group (or A group) was statistically significant (P<0.05). SEM observation of the cement-dentin interface in the C group showed good adaptation, but resin tags were not observed. The other two groups showed poor bonding interface. Most of the fractured adhesive dentin surfaces exhibited cohesive failure in the A group and B group. All the fractured adhesive dentin surfaces exhibited cohesive failure in the C group.

CONCLUSION1% NaClO can increase the bond strength of self-adhesive resin cement to dentin, but 3%EDTA has no effect.

Adhesives ; Dental Bonding ; Dental Stress Analysis ; Dentin ; chemistry ; Dentin-Bonding Agents ; Detergents ; chemistry ; Humans ; Resin Cements

OBJECTIVETo investigate the effect of multiple coatings of the one-step self-etching adhesive on immediate microtensile bond strength to primary dentin.

METHODSTwelve caries-free human primary molars were randomly divided into 2 groups with 6 teeth each. In group 1, each tooth was hemisected into two halves. One half was assigned to control subgroup 1, which was bonded with a single-step self-etching adhesive according to the manufacturer's instructions; the other half was assigned to experimental subgroup 1 in which the adhesive was applied three times before light curing. In group 2, the teeth were also hemisected into two halves. One half was assigned to control subgroup 2, which was bonded with the single-step self-etching adhesive according to the manufacturer's instructions; the other half was assigned to experimental subgroup 2 in which three layers of adhesive were applied with light curing each successive layer. Microtensile bond strength was immediately tested after specimen preparation.

RESULTSWhen the adhesive was applied three times before light curing, the bond strength of the experimental subgroup 1 (n=33, 57.49 +/-11.61 MPa) was higher than that of the control subgroup 1 (n=31, 49.71 +/-11.43 MPa, P<0.05). When using the technique of applying multiple layers of adhesive with light curing each successive layer, no difference of immediate bond strength was observed between the control subgroup 2 and the experimental subgroup 2 (P>0.05).

CONCLUSIONstrength to primary dentin when using the technique of light-curing after applying three layers of adhesive.

Adhesives ; chemistry ; Dental Bonding ; Dental Stress Analysis ; Dentin ; chemistry ; Dentin-Bonding Agents ; chemistry ; Humans ; In Vitro Techniques ; Methacrylates ; chemistry ; Tensile Strength

OBJECTIVETo evaluate the effect of base layer thickness of DyadFlow(DF) self-adhesive resin on dentin bonding strength.

METHODSTwenty extracted intact human molars were randomly selected and the occlusal surface of each molar was prepared by removing the enamel and exposing the dentin surface. The prepared molars were divided, randomly and equally, into 4 groups. For groups G0.5, G1.0 and G2.0, DF was applied directly on the dentin surfaces following the manufacturer's instruction, and for group GOB, OptiBond All-in-One(OB) self etching adhesive was applied on the dentin surface before using DF. The base layer thickness of DF was 0.5 mm, 1.0 mm, 2.0 mm, 2.0 mm for groups G0.5, G1.0, G2.0 and GOB, respectively. Composite crown were built up on each tooth, then the samples were sectioned longitudinally into sticks with proximately 1.0 mm2 bonding area(for microtensile bond strength[MTBS] testing) or slabs (for bonding interface observation with SEM). Fifteen sticks were obtained for each group. The fracture surface was also observed using SEM and the fracture type of each specimen was determined.

RESULTSThe MTBS were: GOB (20.19±3.11) MPa>G0.5 (8.65±1.58) MPa>G1.0 (6.65±1.13) MPa>G2.0 (5.70±0.60) MPa(P<0.05). Bonding interface fracture B2 was most frequently observed for all groups: G0.5: 14/15, G1.0: 13/15, G2.0: 14/15 and GOB: 13/15.

CONCLUSIONSThe MTBS decreased when the base layer thickness of DF increased. Direct application of DF self-adhesive resin on dentin surface adhesive restorations should be concerned.

Adhesives ; chemistry ; Crowns ; Dental Bonding ; Dental Enamel ; Dentin ; chemistry ; Dentin-Bonding Agents ; chemistry ; Humans ; Molar ; Resin Cements ; chemistry ; Tensile Strength

The existing dentin bonding systems based on acid-etching technique lead to the loss of both extrafibrillar and intrafibrillar minerals from dentin collagen, causing excessive demineralization. Because resin monomers can not infiltrate the intrafibrillar spaces of demineralized collagen matrix, degradation of exposed collagen and resin hydrolysis subsequently occur within the hybrid layer, which seriously jeopardizing the longevity of resin-dentin bonding. Collagen extrafibrillar demineralization can effectively avoid the structural defects within the resin-dentin interface caused by acid-etching technique and improve the durability of resin-dentin bonding, by preserving intrafibrillar minerals and selectively demineralizing extrafibrillar dentin. The mechanism and research progress of collagen extrafibrillar demineralization in dentin bonding are reviewed in the paper.
Humans ; Collagen ; Dental Bonding ; Dentin/chemistry* ; Dentin-Bonding Agents/chemistry* ; Materials Testing ; Minerals ; Resin Cements/chemistry* ; Tooth Demineralization

The main mineral component of natural tooth was determined as calcium apatite many years ago; most of them exist in the form of hydroxyapatite with different crystallites. If a tooth decayed, the crystalline of hydroxyapatite would be changed and decomposed. In our experiment, a natural tooth with caries was measured by high resolution XRD equipment: X'pert Pro. Three spots which included normal enamel, normal dentin and caries tissue were analyzed. The results showed that tooth was a kind of biological mixed crystal composed of many crystal phases, the main crystal phase was hydroxyapatite. From normal enamel to normal dentin and to caries tissue, the length of the a-axis of hydroxyapatite crystallite increased, the length of the c-axis of hydroxyapatite crystallite remained unchanged. The crystal sizes were: normal enamel D002 = 27.600 nm; normal dentin D002 = 16.561 nm; caries tissue D002 = 13.163 nm. Crystallinity: normal enamel>normal dentin>caries tissue. According to our experiment, tooth could be conveniently studied by high resolution microdiffracion XRD equipment.
Dental Caries ; metabolism ; Dental Enamel ; chemistry ; Dentin ; chemistry ; Humans ; Tooth ; chemistry ; X-Ray Diffraction ; methods

Tooth decay is prevalent, and secondary caries causes restoration failures, both of which are related to demineralization. There is an urgent need to develop new therapeutic materials with remineralization functions. This article represents the first review on the cutting edge research of poly(amido amine) (PAMAM) in combination with nanoparticles of amorphous calcium phosphate (NACP). PAMAM was excellent nucleation template, and could absorb calcium (Ca) and phosphate (P) ions via its functional groups to activate remineralization. NACP composite and adhesive showed acid-neutralization and Ca and P ion release capabilities. PAMAM+NACP together showed synergistic effects and produced triple benefits: excellent nucleation templates, superior acid-neutralization, and ions release. Therefore, the PAMAM+NACP strategy possessed much greater remineralization capacity than using PAMAM or NACP alone. PAMAM+NACP achieved dentin remineralization even in an acidic solution without any initial Ca and P ions. Besides, the long-term remineralization capability of PAMAM+NACP was established. After prolonged fluid challenge, the immersed PAMAM with the recharged NACP still induced effective dentin mineral regeneration. Furthermore, the hardness of pre-demineralized dentin was increased back to that of healthy dentin, indicating a complete remineralization. Therefore, the novel PAMAM+NACP approach is promising to provide long-term therapeutic effects including tooth remineralization, hardness increase, and caries-inhibition capabilities.
Amines ; pharmacology ; Calcium ; Calcium Phosphates ; chemistry ; pharmacology ; Dentin ; chemistry ; Humans ; Nanocomposites ; chemistry ; Nanoparticles ; Tooth Remineralization ; methods

OBJECTIVETo evaluate the nanoleakage and ultramorphology of four self-etching adhesives.

METHODSSixteen freshly extracted, caries-free human third molars were selected. A flat dentin surface was exposed by removing occlusal enamel. All teeth were randomly divided into four groups acorrding to four different self-etch adhesive: Adper Prompt (A), iBond (B), Xeno III (C) and SE Bond (D). The dentin were bonded with dentin adhesive system according to manufacturer's directions. Composite layers were built up incrementally. The specimens were sectioned longitudinally across the resin-dentin interface into 4.0 mm×0.9 mm sticks and then traced with ammoniacal silver solution. Epoxy resin-embedded sections were prepared for transmission electron microscope (TEM) to observe nanoleakage. The images were qualitatively compared by NIH software, and data was analyzed by SPSS.

RESULTSDifferent thickness of hybrid layer and adhesives layer were observed for each adhesive. The hybrid layer of A, C was thicker than that of B, D, and adhesive layer of D was thicker than the others. The extent of nanoleakage varied among different adhesives: A (45.02 ± 9.49), B (43.97 ± 8.55), C (27.02 ± 10.86), D (12.94 ± 2.07). D presented significantly less silver deposition than any of the others did (P < 0.05).

CONCLUSIONSThe thickness of hybrid layer and adhesive layer vary among the four adhesives. The shape and extent of nanoleakage of each adhesive are also different. Two-step system shows less nanoleakage than one-step systems do.

Acid Etching, Dental ; Adhesives ; chemistry ; Dental Leakage ; pathology ; Dentin ; ultrastructure ; Dentin-Bonding Agents ; chemistry ; Humans ; Methacrylates ; chemistry ; Microscopy, Electron, Transmission ; Molar, Third ; Resin Cements ; chemistry

10-methacryloyloxydecyl dihydrogen phosphate was synthesized from the reaction of phosphoryl chloride with methylacrylic acid and 1, 10-decanediol. The structure of product was characterized by 1H-NMR, 31P-NMR and MS. The effect of this product on the bond durability of composite resin joined to enamel, dentin and dental alloy was evaluated by the test of shear strengths. 10-methacryloyloxydecyl dihydrogen phosphate significantly elevated the bond strength of the composite resin joined to enamel, dentin, Ti alloy and Co-Cr alloy; the relevant shear strengths were 13.5, 11.2, 16.2 and 18.1 MPa, respectively.
Dental Bonding ; Dentin-Bonding Agents ; chemical synthesis ; chemistry ; Humans ; Methacrylates ; chemical synthesis ; chemistry ; Shear Strength

Dentin matrix metalloproteinases (MMPs) are a family of host-derived proteolytic enzymes trapped within mineralized dentin matrix, which have the ability to hydrolyze the organic matrix of demineralized dentin. After bonding with resins to dentin there are usually some exposed collagen fibrils at the bottom of the hybrid layer owing to imperfect resin impregnation of the demineralized dentin matrix. Exposed collagen fibrils might be affected by MMPs inducing hydrolytic degradation, which might result in reduced bond strength. Most MMPs are synthesized and released from odontoblasts in the form of proenzymes, requiring activation to degrade extracellular matrix components. Unfortunately, they can be activated by modem self-etch and etch-and-rinse adhesives. The aim of this review is to summarize the current knowledge of the role of dentinal host-derived MMPs in dentin matrix degradation. We also discuss various available MMP inhibitors, especially chlorhexidine, and suggest that they could provide a potential pathway for inhibiting collagen degradation in bonding interfaces thereby increasing dentin bonding durability.
Chlorhexidine ; pharmacology ; Collagen ; metabolism ; ultrastructure ; Dental Bonding ; Dentin ; enzymology ; ultrastructure ; Dentin-Bonding Agents ; chemistry ; Enzyme Inhibitors ; pharmacology ; Humans ; Hydrolysis ; Matrix Metalloproteinase Inhibitors ; Matrix Metalloproteinases ; metabolism ; Resin Cements ; chemistry