To achieve an esthetic restoration, visualized information considering the facial aspect of patient is required. As for the reasons of esthetic failure, it could be explained by lack of communication and information such as horizontal, vertical and esthetic line. Therefore, it is important to deliver that the visualized information to dental technicians or other dentists for the success of esthetic treatment. This case report presents the process of visualizing esthetic information and designing the restoration using a digital diagnostic tool; Digital Smile Design.
Dental Technicians ; Dentists ; Humans

PURPOSE: This study evaluated the usability of and satisfaction with two types of computer-aided design (CAD) software among users who had experience with dental implant CAD software and those who did not. MATERIALS AND METHODS: Dental technicians (n = 20) who had previous experience with dental implant CAD Software and students from the College of Dentistry (n = 12) who had never designed implant custom abutments were asked to evaluate two types of CAD Software, Exocad and Deltanine. In addition, the participants were asked to fill out a structured questionnaire (Section 1: Entering basic information and retrieving files; Section 2: Setting conditions before abutment design; Section 3: Setting abutment design; and Section 4: Overall satisfaction). For the statistical analysis of the collected data, Mann-Whitney U test was used (α = .05). RESULTS: The ease of design and satisfaction with the implant CAD Software, evaluated with respect to 21 statements divided into four Stages, were significantly higher for Exocad in both groups for Secion 1. For Sections 2 and 3, participants with experience evaluated Deltanine to be significantly better. For Section 4, both groups evaluated Exocad Software to be better. CONCLUSION: Overall, the Exocad Software was evaluated as having better usability and offering greater satisfaction. However, in terms of performance in the core of the design process, i.e. Sections 2 and 3, Deltanine was rated higher by the experienced users. Thus, if the user interface design parts are supplemented, Deltanine CAD Software could be put to a wider use in clinics.
Computer-Aided Design ; Dental Implants ; Dental Technicians ; Dentistry ; Humans

PURPOSE: The purpose of this study was to measure the tightening torque for dental implant in dental laboratory and to analyze of the effects of different tightening torque. MATERIALS AND METHODS: The tightening torque for dental implant in dental laboratory were measured by digital torque gauge. The length of abutment and analog were measured as tightening torque of manufacturer's instructions and the measured value. And the data were statically analyzed. RESULTS: The mean tightening torque of implant screw in dental laboratory was 1.563 +/- 0.332 Ncm. The external type implant system of total length were showing no significant differences but the internal type implant system had difference significant (P < 0.05) when compared with tightening torque. CONCLUSION: The implant prosthesis should be made under manufacturer's instructions especially as tightening torque of screw. For the fidelity of implant prosthesis, dental technician should learn how to use the torque gauge.
Dental Implants ; Dental Prosthesis ; Dental Technicians ; Humans ; Laboratories, Dental* ; Prostheses and Implants ; Torque*

PURPOSE: Recently, according to the development of digital technology, computer aided design/computer aided manufacture (CAD/CAM) system is widely used for fabrication of various dental prostheses in the field of dentistry. This study aims to survey the present state and awareness of CAD/CAM system on domestic dental field, and to supply the advice for the application of the new system. MATERIALS AND METHODS: In this questionnaire survey was conducted for a total of 298 dentists, dental hygienist and dental technicians of the whole country including the dental hospital of Seoul National University for two months from November to December, 2016 through mail. RESULTS: The most important purpose to consider when purchasing a dental CAD/CAM milling machine were the performance of the milling machine (64.43%) and the use of milling machine was the highest with 49.33% of manufacturing for dental prosthesis and customized implant abutment. In addition, more than 60% of respondents answered positively about the purchase of new milling machine if the CAD/CAM milling machine was improved to satisfactory performance. CONCLUSION: This survey results show that the improved CAD/CAM milling machine would be play an important role in the dental industry in preparation for digitization and the 4th industrial revolution.
Dental Hygienists ; Dental Prosthesis ; Dental Technicians ; Dentistry ; Dentists ; Humans ; Postal Service ; Seoul ; Surveys and Questionnaires

OBJECTIVEThe aim of the survey was to obtain the basic information of the working authorizations of fixed partial dentures so as to enhance the quality of professional cooperation between dentists and dental technicians in the future.

METHODS2317 pieces of working authorizations of fixed partial dentures were divided into three groups according to the level of consignors. The filling of working authorization was recorded. The items in the questionnaire included the patients' information (name, gender, age and telephone number), design (design of occlusion, bridge, bottom crown, connector, and shade selection), sign and product date.

RESULTSThe statistical test showed there was significant difference in patients' age, telephone number and product date among these three groups. Dentists paid more attention to shade selection of anterior teeth than posterior teeth.

CONCLUSIONIn this survey, the filling of working authorization of fixed partial dentures is generally ignored by dentists. The filling of working authorization should be strengthened.

Statement of problem: Many factors influence shade determination in clinical practice and shade matching is highly affected by the viewing conditions. Purpose: This study investigated the differences in shade perception among distinct groups of dental personnel (10 prosthodontists, 10 general practitioners, 10 last-year dental students and 10 dental technicians). Material and method: Four groups of dental personnel were investigated. They were tested to eliminate color blindness. To compare shade selection ability, they were asked to match four test tabs of shades A3, B2, C2 and D4 (VITAPAN. Classical shade guide. The identification codes of the shade tabs were masked to prevent shade memory.) against another full set of VITAPAN. Classical shade guide under similar lighting conditions. Shade selections were randomly repeated five times every week and then the repeatability between dental personnel was evaluated. To compare value perception ability, they were asked to arrange randomly selected five test tabs (B1, A2, D2, C3, A4) in descending order from the brightest to the darkest. To compare hue determination ability, they were asked to divide selected eight test tabs (A2, A3, B2, B3, C2, C3, D2, D3) into four groups by manufacturer as follows: Group A-Reddish brown, Group B-Reddish yellow, Group C-Grey, Group D-Reddish grey. Results and conclusion: The obtained results were as follows: 1. For the value perception ability and hue determination ability, there was no significant difference among 4 groups: prosthodontists, general practitioners, dental students, dental technicians(P>.05). 2. For shade selection ability, the prosthodontists and dental technicians were significantly higher than dental students(P<.05). 3. The repeatability of selected shade in the dental technicians was significantly higher than that of general practitioners and dental students(P<.05). 4. The prosthodontists and dental technicians had significantly higher selection ability than dental students for shade B2(P<.05).
Color Vision Defects ; Dental Technicians ; General Practitioners ; Humans ; Masks ; Perception* ; Students, Dental

OBJECTIVES: To investigate the relationship between job stress and the variables associated with the organizational effectiveness of dental technicians. METHODS: The job stresses were divided into the following six components; somatization, obsessive-compulsive, interpersonal sensitivity, depression, anxiety, and hostility. The organi-zational effectiveness variables in this study included job satisfaction, occupational commitment, organizational commitment and intent to leave. The sample used in this study consisted of 248 dental technicians working in hospitals and dental laboratories. The data were collected with self-administered questionnaires between March 16 and April 29 in 2002, and the results analyzed with ANOVA and multiple regression analysis. RESULTS: Firstly, job stress of dental technicians was found to be significantly different in relation to the number of workers at the workplace and the working hours. The level of job stress was the highest when the number of workers were more than 10, or when the daily working hours were over 12. Secondly, of the six variables of job stress, five variables of somatization, interpersonal sensitivity, depression, anxiety, and hostility were found to have significant negative correlations with job satisfaction. Thirdly, all six job stress variables were found to have significant negative correlations with the occupational and organizational commitments of the dental technicians. Finally, depression was the only job stress variable found to have a significant effect on the dental technicians' intent to leave. CONCLUSIONS: The results of this study indicate that personal and organizational efforts are very important to improve the organizational effectiveness in reducing work related stress. Organizational support, especially for managing the depression of dental technicians is recommended.
Anxiety ; Dental Technicians* ; Depression ; Hostility ; Humans ; Job Satisfaction ; Laboratories, Dental ; Questionnaires

In an effort to facilitate fabrication procedure of all ceramic crowns, a novel preparation method for all ceramic crown using alumina tape was developed. The alumina tape having a uniform thickness was cast by using Doctor blade method. The physical properties of newly introduced alumina tape has biaxial flexure strength of 500.600 MPa. The value of toughness is 3.18~3,28 MPa.m(1/2) which corelates with facture and the linear shrinkage rate of the alumina tape is 0.44% during core production. The marginal fitness of the alumina tape all-ceramic restoration with 90degrees shoulder margin had average marginal discrepancy at 78.3micrometer and average marginal gap at 44.4micrometer. At the marginal preparation of 135degrees deep chamfer, the average marginal discrepancy at 82.1micrometer and the average marginal gap at 40.2micrometer had been reported. This fabrication procedure of all ceramic crowns with alumina tapes is easier and less technical sensitive for dental technicians. After restoration with new all ceramic crowns we followed the patients 2 years later, there were no complications as porcelain fractures or periodontal disease. We had good esthetic clinical results with new all ceramic crowns.
Aluminum Oxide* ; Ceramics* ; Crowns ; Dental Porcelain ; Dental Technicians ; Humans ; Periodontal Diseases ; Shoulder

PURPOSE: This study was performed to develop a proper self-administered survey instrument which can be used to measure psychiatric stress symptoms in Korean dental laboratory technicians, and to investigate the relationship between the symptom dimensions and stress inducing factors, such as psychological distress, stress inducing overload, work demand, work procedure and so forth in them. METHODS: Prepared questionnaires were mailed to 1,000 dental laboratory technicians who were systematically selected. There were 786 responses to the questionnaires. All the data obtained were analyzed with SAS program. RESULTS: Fifty items for the stress symptom checklist for dental technician(SCLD) were selected after a pilot test, interviews and literature reviews. Stress symptoms were classified into the following 6 categories, i.e, somatization, obsessive-compulsive, interpersonal sensitivity, depression, anxiety, and hostility symptom. Factor analysis for validity was carried out for corroboration, using the SCL-90-R as a standard. CONCLUSION: SCLD had the reasonable reliability and validity. We believe that this study provides validity and reliability for new self-report questionnaire, it will make a significant contribution to assessment of stress symptoms.
Anxiety ; Checklist ; Dental Technicians ; Depression ; Hostility ; Humans ; Laboratories, Dental* ; Postal Service ; Reproducibility of Results ; Surveys and Questionnaires

PURPOSE: Increasing use of computer aided design-computer aided manufacturing (CAD-CAM) system and number of design software made design of restoration easy and quick. Outcome of restoration has been dependent on dental technician's wax up proficiency, dentists can design restoration for themselves now. This study aims to investigate the outcome of restoration designs, according to handling skill of CAD-CAM design tool. MATERIALS AND METHODS: A patient's mandibular right 1st molar was prepared. After taking impression, stone model was made, scanned the stone model with 3 shape intra-oral scanner, stereolithography (STL) file was extracted. With 3shape dental designer, one dental technician with more than 5 years work experience (designer 0) and three dental technicians with less than 2years work experience (designer 1, 2, 3-group DT) and 4 1st year residents (designer 4, 5, 6, 7-group RT) designed gold crown on the same STL file. Designed crown's MD (mesio-distal) and BL (bucco-lingual) diameter, height of crown, inter-cuspal distance, number of occlusal contact points were compared. Statistical analysis was carried out, test of normality within each group, using independent t-test. Number of contact points were compared, using Wilcoxon signed-rank test. RESULTS: There was no significant difference between group DT and group RT. Number of contact points also resulted in no significant difference. CONCLUSION: The outcome of each designed crowns showed no statistical differences, in values which can be expressed as numbers. Subjective factors were different. With increasing proficiency in handling designing software, fabrication of restorations according to each designer's occlusal concept can be made easy.
Computer-Aided Design* ; Crowns* ; Dental Technicians ; Dentists ; Humans ; Molar ; Occupational Groups*