OBJECTIVE: To investigate the clinical and radiographic outcomes of 3 years after partial pulpotomy with iRoot BP Plus in immature permanent teeth with complex crown fracture and to provide refe-rence for the clinical application. METHODS: The study was prospectively designed and 104 immature permanent teeth with complex crown fracture were randomly allocated into two groups (n=52). The experiment group received iRoot BP Plus as the pulp capping agent while the control group received calcium hydroxide as the pulp capping agent. After partial pulpotomy, all teeth were clinically and radiographically assessed at the end of 1, 3, 6, 12, 18, 24, 30, and 36 months. The success rate in the two groups was evaluated to see if there was significant difference. The root canal wall thickness in the treated teeth was compared both between the groups and within the groups with those of the corresponding healthy teeth on the opposite side, in the same patient. RESULTS: Excluding those lost to follow-up, there were 44 teeth in calcium hydroxide group (8 teeth accounting for 15.4% were lost to follow up) and 45 teeth in iRoot BP Plus group (7 teeth accounting for 13.5% were lost to follow up) in the end. There was no intergroup difference in the success rate between calcium hydroxide group and iRoot BP Plus group (per-protocol analysis: 80% vs. 87%; intent-to-treat analysis: 67% vs. 75%). The non-inferiority margin was -10%. The 95% confidence interval of the difference in success rate was -8% to 22%. There was no significant difference in root development between the experimental teeth and contralateral control teeth. The thickness of upper 1/3 root canal in the iRoot BP Plus group was thinner than that in the CH group [(1.82±0.21) mm vs. (1.91±0.20) mm, P=0.047]. CONCLUSION iRoot BP Plus used in pulpotomy can effectively preserve the living pulp and promote the development of root in the young permanent teeth with complex crown fracture.
Humans ; Tooth Fractures ; Calcium Hydroxide/therapeutic use* ; Female ; Male ; Child ; Pulp Capping and Pulpectomy Agents ; Pulpotomy/methods* ; Prospective Studies ; Dental Pulp Capping/methods* ; Adolescent ; Dentition, Permanent ; Drug Combinations ; Tooth Crown/injuries* ; Root Canal Filling Materials ; Silicones

OBJECTIVE: To compare the clinical effects of pulpotomy with two kinds of calcium silicate materials, and to evaluate the formation of dentin bridge and pulp calcification after pulpotomy of adult permanent teeth. METHODS: Patients who visited the General Department of Peking University School and Hospital of Stomatology from November 2017 to September 2019 and planned for pulpotomy on permanent premolars and molars with carious exposed pulp were selected. They were randomly divided into two groups. Bioceramic putty material iRoot BP (iRoot group, n=22) and mineral trioxide aggregate MTA (MTA group, n=21) were used as pulp capping agents, respectively. The patients were recalled after one year and two years. The clinical efficacy, dentin bridge index (DBI) and pulp calcification index (PCI) were recorded. Blinding method was used for the patients and evaluators. RESULTS: There was no significant difference in gender, mean age, dentition and tooth position between the two groups (P>0.05). Seven cases were lost during the first year (4 cases in iRoot group and 3 cases in MTA group). In the iRoot group, 1 case had transient sensitivity at the time of 1-year follow-up. The cure rate of the two groups was 100% at the time of 2-year follow-up. The proportion of dentin bridge formation was 38.9% one year after operation, 55.6% two years after operation. The proportion of partial or even complete disappearance of root canal image was 5.6% before operation, 38.9% and 55.6% one and two years after operation, respectively. The difference was statistically significant by rank sum test (P < 0.05). There was no significant difference in dentin bridge formation and pulp calcification between the two groups (P < 0.05). DBI and PCI after operation was as the same as those before operation (44.4% cases of DBI and 25% cases of PCI) or gradually increased (55.6% cases of DBI and 75% cases of PCI). Spearman's nonparametric correlation analysis showed that age was positively correlated with preoperative pulp calcification index (PCI0, P < 0.05), but not with the dentin bridge index (DBI1, DBI2), pulp calcification index (PCI1, PCI2) and the degree of change (DBI2 vs. DBI1, PCI1 vs. PCI0, PCI2 vs. PCI0) 1-year and 2-year after operation (P>0.05). CONCLUSION According to this study, good clinical effects were obtained within 2-year after pulpotomy of adult permanent teeth with MTA and iRoot. In some cases, the root canal system had a tendency of calcification aggravation, and there was no statistical difference in the development of this trend between the two groups.
Humans ; Adult ; Pulpotomy/methods* ; X-Rays ; Calcium Compounds/therapeutic use* ; Dentition, Permanent ; Molar/surgery* ; Treatment Outcome ; Silicates/therapeutic use* ; Aluminum Compounds/therapeutic use* ; Oxides ; Drug Combinations ; Dental Pulp Capping

In recent years, great progress has been made in research on the treatment of pulpitis, mainly due to the rapid development of basic and clinical researches in this field, and some achievement from basic research has been applied in clinical practice. Advances in the diagnostic methods for pulpitis can help the clinicians to recognize the true state of pulpitis more accurately and to adopt the corresponding treatment methods including indirect/direct pulp capping, pulpotomy, pulp regeneration and root canal therapy. The new theory of pulpitis diagnosis and the studies on immune defense, repair function of dental pulp and new pulp capping materials have significantly improved the success rate of vital pulp therapy. For diffuse coronary pulpitis or radicular pulpitis, which is difficult to achieve vital pulp therapy successfully, methods of pulp revascularization, cell homing and pulp stem cells-mediated pulp regeneration can also be used as treatment options in addition to root canal therapy. The present article focuses on the research progress on pulpitis treatments and related clinical transformation practices, in order to provide reference on vital pulp therapy and pulp regeneration for clinicians.
Dental Pulp ; Dental Pulp Capping ; Humans ; Pulpitis/therapy* ; Pulpotomy ; Regeneration

Vital pulp therapy(VPT)is an important pathway to preserve and maintain pulp tissue in a healthy state. VPT has been improved recently as the new progress achieved in pathobiology, bioactive materials and clinical research. The present review summarizes the clinical outcomes and prognostic factors of VPT, including direct pulp capping, partial pulpotomy and full pulpotomy in mature permanent teeth with carious pulp exposure, and briefly introduces the new progress in this field.
Calcium Compounds ; Dental Caries/therapy* ; Dental Pulp Capping ; Dentition, Permanent ; Humans ; Pulpotomy ; Silicates ; Treatment Outcome

OBJECTIVES: This study investigated the indirect effect of calcium-enriched mixture (CEM) cement and mineral trioxide aggregate (MTA), as 2 calcium silicate-based hydraulic cements, on human dental pulp stem cells (hDPSCs) through different dentin thicknesses.MATERIALS AND METHODS: Two-chamber setups were designed to simulate indirect pulp capping (IPC). Human molars were sectioned to obtain 0.1-, 0.3-, and 0.5-mm-thick dentin discs, which were placed between the 2 chambers to simulate an IPC procedure. Then, MTA and CEM were applied on one side of the discs, while hDPSCs were cultured on the other side. After 2 weeks of incubation, the cells were removed, and cell proliferation, morphology, and attachment to the discs were evaluated under scanning electron microscopy (SEM). Energy-dispersive X-ray (EDXA) spectroscopy was performed for elemental analysis. Alkaline phosphatase (ALP) activity was assessed quantitatively. The data were analyzed using the Kruskal-Wallis and Mann-Whitney tests.RESULTS: SEM micrographs revealed elongated cells, collagen fibers, and calcified nucleations in all samples. EDXA verified that the calcified nucleations consisted of calcium phosphate. The largest calcifications were seen in the 0.1-mm-thick dentin subgroups. There was no significant difference in ALP activity across the CEM subgroups; however, ALP activity was significantly lower in the 0.1-mm-thick dentin subgroup than in the other MTA subgroups (p < 0.05).CONCLUSIONS: The employed capping biomaterials exerted biological activity on hDPSCs, as shown by cell proliferation, morphology, and attachment and calcific precipitations, through 0.1- to 0.5-mm-thick layers of dentin. In IPC, the bioactivity of these endodontic biomaterials is probably beneficial.
Alkaline Phosphatase ; Biocompatible Materials ; Calcium ; Cell Proliferation ; Collagen ; Dental Pulp Capping ; Dental Pulp ; Dentin ; Endodontics ; Humans ; Microscopy, Electron, Scanning ; Miners ; Molar ; Pemetrexed ; Spectrum Analysis ; Stem Cells

OBJECTIVE: To assess the feasibility and efficacy of simvastatin-collagen composite sponge as a novel, direct pulp capping material. METHODS: A total of 120 Sprague-Dawley rats were randomly divided into three groups: the simvastatin-collagen composite sponge group (SIM group), the collagen sponge group (CS group), and the Ca(OH)2 group (CH group). An endodontic entry cavity was prepared on the occlusion of the first molar on the left maxillary of each rat. The contralateral teeth were utilized as the normal control group. The rats were experimented after 1, 3, 7, 14, and 28 days. X-ray observations were conducted and the specimens underwent hematoxylin-eosin (HE) and Masson's Thichrome staining. Dentin bridge formations and pulpal biology reactions were evaluated histopathologically. RESULTS: X-ray results: high-density images could be observed on the pulp exposure sites in the CH group on the 28th day. In the SIM group, high-density images could be observed after 14 and 28 days, whereas in the CS group, high-density images were not observable in the exposed area. HE and Masson's Thichrome staining results: different degrees of inflammation under the cavity were detected in the three groups at different time points. The inflammatory reaction of the CS group was the most serious. The degree of the inflammatory reaction varied significantly between the SIM and the CS groups on the 14th and 28th days (P<0.01). The inflammatory reaction in the SIM group was lighter than in the CH group. There was a statistical difference between the SIM and the CH groups on the 14th day (P<0.05). During the observation period, the SIM group induced the best and fastest formation of reparative dentin. As for dentin bridge formation, a significantly higher complete bridge rate was observed in the SIM group than in the CH and in the CS groups on the 14th day (P<0.05) and for the SIM and the CH groups compared with the CS group on the 28th day (P<0.05). CONCLUSIONS The simvastatin-collagen composite sponge exhibited satisfactory biocompatibility with the pulp tissue and promoted the formation of reparative dentin. The application of simvastatin-collagen composite sponge as a pulp-capping material has satisfactory potential.
Animals ; Calcium Hydroxide ; Collagen ; Dental Pulp ; Dental Pulp Capping ; Dental Pulp Exposure ; Dentin, Secondary ; Molar ; Random Allocation ; Rats ; Rats, Sprague-Dawley ; Simvastatin

This study evaluated the microleakage of three restorative materials and three tricalcium silicate-based pulp capping agents. The restorative materials were composite resin (CR), resin-reinforced glass ionomer cement (RMGI), and traditional glass ionomer cement (GIC) and the pulp capping agents were TheraCal LC® (TLC), Biodentine® (BD), and ProRoot® white MTA (WMTA). Additionally, shear bond strengths between the pulp-capping agents and dentine were compared.Class V cavities were made in bovine incisors and classified into nine groups according to the type of pulp-capping agent and final restoration. After immersion in 0.5% fuchsin solution, each specimen was observed with a stereoscopic microscope to score microleakage level. The crowns of the bovine incisors were implanted into acrylic resin, cut horizontally, and divided into three groups. TLC, BD and WMTA blocks were applied on dentine, and the shear bond strengths were measured using a universal testing machine.The microleakage was lowest in TLC + GIC, TLC + RMGI, TLC + CR, and BD + GIC groups and highest in WMTA + RMGI and WMTA + CR groups. The shear bond strength of BD group was the highest and that of WMTA group was significantly lower than the others.
Crowns ; Dental Pulp Capping ; Dentin ; Glass Ionomer Cements ; Immersion ; Incisor ; Pemetrexed ; Pulp Capping and Pulpectomy Agents ; Rosaniline Dyes

OBJECTIVE: To investigate influence of setting time on bond strength of different bioactive pulp capping materials with self-etch or etch-and-rinse adhesive. METHODS: Sixty specimens were prepared for each of the three tested capping materials, namely mineral trioxide aggregate (MTA), iRoot BP Plus (BP) and iRoot FS (FS). Specimens of each material were divided into three groups and bonded at three setting time points of the materials respectively: initial setting time (4 h for MTA, 2 h for BP and 20 min for FS), 24 h after application and 7 d after application. The specimen surfaces of each group were treated with self-etch mode or etch-and-rinse mode of one universal adhesive (Single Bond Universal, SBU) (n=10). The bonding area was restricted to a round area with 3 mm diameter, on which composite cylinders were build up with flowable composite and light cured completely. The shear bond strength was tested immediately with a shear strength tester and fracture mode was observed under stereo microscope and recorded. The mean shear bond strength for each group was analyzed with SPSS 19.0 software ANOVA method. The surface morphology of each material was observed after setting and acid treatment under scanning electron microscope. RESULTS: There was no significant difference among the three tested materials at either initial setting point or 7 d after application (P<0.05). The bond strength of MTA was significantly higher than those of BP and FS 24 h after application in both bonding modes (P<0.05). For all the three tested materials, shear bond strength was significantly higher for complete setting group than for initial setting group of the same material (P<0.05). Under scanning electron microscope, the characteristic crystal patterns could be observed on the three bioactive materials surfaces after complete setting, the size of which was bigger for MTA than for BP and FS. These features were lost to some extent after self-etch primer application or phosphoric acid etching. CONCLUSION Based on the present results, adequate bond strength can be obtained for FS at initial setting time, which is comparable with BP and MTA. This implies that clinically composite restoration can be placed over bioactive direct capping materials after shortened initial setting process in one visit.
Acid Etching, Dental ; Composite Resins ; Dental Bonding ; Dental Cements ; Dental Materials ; Dental Pulp Capping ; Dental Stress Analysis ; Dentin-Bonding Agents ; Materials Testing ; Resin Cements ; Shear Strength

OBJECTIVES: Direct pulp capping is a treatment for mechanically exposed pulp in which a biocompatible capping material is used to preserve pulpal vitality. Biocompatibility tests in animal studies have used a variety of experimental protocols, particularly with regard to the exposure site. In this study, pulp exposure on the occlusal and mesial surfaces of molar teeth was investigated in a rat model. MATERIALS AND METHODS: A total of 58 maxillary first molars of Wistar rats were used. Forty molars were mechanically exposed and randomly assigned according to 3 factors: 1) the exposure site (occlusal or mesial), 2) the pulp-capping material (ProRoot White MTA or Bio-MA), and 3) 2 follow-up periods (1 day or 7 days) (n = 5 each). The pulp of 6 intact molars served as negative controls. The pulp of 12 molars was exposed without a capping material (n = 3 per exposure site for each period) and served as positive controls. Inflammatory cell infiltration and reparative dentin formation were histologically evaluated at 1 and 7 days using grading scores. RESULTS: At 1 day, localized mild inflammation was detected in most teeth in all experimental groups. At 7 days, continuous/discontinuous calcified bridges were formed at exposure sites with no or few inflammatory cells. No significant differences in pulpal response according to the exposure site or calcium-silicate cement were observed. CONCLUSIONS: The location of the exposure site had no effect on rat pulpal healing. However, mesial exposures could be performed easily, with more consistent results. The pulpal responses were not significantly different between the 2 capping materials.
Animals ; Dental Pulp Capping ; Dentin ; Follow-Up Studies ; Inflammation ; Models, Animal* ; Molar ; Pemetrexed ; Rats* ; Rats, Wistar ; Tooth

The long-term effect of direct pulp capping and pulpotomy is closely related to the type of pulp capping materials. Various kinds of direct pulp capping materials are available, such as calcium hydroxide and mineral trioxide aggregates. Diverse new pulp capping materials have been reported recently. The excellent performance of calcium silicates has attracted much attention in previous studies. Moreover, enamel matrix derivative (Emdogain), which is capable of regeneration and remineralization, and other materials with similar capabilities have shown potential for use in pulp capping.
Aluminum Compounds ; Calcium Compounds ; Calcium Hydroxide ; Dental Pulp ; Dental Pulp Capping ; Drug Combinations ; Oxides ; Pulp Capping and Pulpectomy Agents ; Pulpotomy ; Root Canal Therapy ; Silicates