Current biomechanical research of dental implants focuses on the mechanical damage and enhancement mechanism of the implant-abutment interface as well as how to obtain better mechanical strength and longer fatigue life of dental implants. The mechanical properties of implants can be comprehensively evaluated by strain gauge analysis, photo elastic stress analysis, digital image correlation, finite element analysis, implant bone bonding strength test, and measurement of mechanical properties. Finite element analysis is the most common method for evaluating stress distribution in dental implants, and static pressure and fatigue tests are commonly used in mechanical strength test. This article reviews biomechanical research methods and evaluation indices of dental implants. Results provide methodology guidelines in the field of biomechanics by introducing principles, ranges of application, advantages, and limitations, thereby benefitting researchers in selecting suitable methods. The influencing factors of the experimental results are presented and discussed to provide implant design ideas for researchers.
Biomechanical Phenomena ; Computer Simulation ; Consensus ; Dental Abutments ; Dental Implant-Abutment Design ; Dental Implants ; Dental Prosthesis Design ; Dental Stress Analysis ; Finite Element Analysis ; Stress, Mechanical

The objective of this study was to investigate the mechanical characteristics of implant-abutment interface design in a dental , using nonlinear finite element analysis (FEA) method. This finite element simulation study was applied on three commonly used commercial dental implant systems: model I, the reduced-diameter 3i implant system (West Palm Beach, FL, USA) with a hex and a 12-point double internal hexagonal connection; model II, the Semados implant system (Bego, Bremen, Germany) with combination of a conical (450 taper) and internal hexagonal connection; and model III, the Brinemark implant system (Nobel Biocare, Gothenburg,Sweden) with external hexagonal connection. In simulation, a force of 170 N with 45" oblique to the longitudinal axis of the implant was loaded to the top surface of the abutment. It has been found from the strength and stiffness analysis that the 3i implant system has the lowest maximum von Mises stress, principal stress and displacement while the Br Bnemark implant system has the highest. It was concluded from our preliminary study using nonlinear FEA that the reduced-diameter 3i implant system with a hex and a 12-point double internal hexagonal connection had a better stress distribution, and produced a smaller displacement than the other two implant systems.
Computer Simulation ; Computer-Aided Design ; Dental Implant-Abutment Design ; statistics & numerical data ; Dental Prosthesis Design ; Dental Stress Analysis ; methods ; Finite Element Analysis ; Humans ; Stress, Mechanical

OBJECTIVETo compare the color character of VITA shade guide and the custom shade guide with metal substrate.

METHODSColor of 9 sites of 5 series of VITA shade guides and custom shade guides with metal substrate were measured by means of PR-650 spectrophotometer.

RESULTSThe color range of VITA shade guide were that L* was 56.86-73.86, a* was-1.29-3.69, b* was 7.09-21.94, and the transparence was 3.20-7.59. The color range of the custom shade guide was that L* was 60.59-78.54, a* was -1.09-4.99, b* was 7.60-22.35, and the transparence was 0.23-10.98. L*, a* and b* of the custom shade guide with metal substrate were higher than VITA shade guide, and the transparence was differet. The color difference of homonymy shade tab between custom shade guide and VITA shade guide was larger than 1.5 NBS.

CONCLUSIONThere is color difference between VITA shade guide and custom shade guide. Metal substrate has effects on the color of cero-metal prosthesis, and color selection in clinic should be carefully considered.

Dental Implants ; Dental Prosthesis Design ; trends ; Humans

OBJECTIVETo investigate the influence of background color on veneered In-Ceram and Cercon dental ceramics including Vita In-Ceram Electroformed Alumina (AL2), Electroformed Zirconia (Z21), Cercon base color Zirconia and Cercon base Zirconia.

METHODSThe colorimetric values of all the materials on noble metal, Ni-Cr alloy, silver amalgam and resin background were measured with a spectrocolorimeter, and the color difference among the groups was calculated.

RESULTSAfter veneered, the color difference of Z21 Electroformed Zirconia was more distinct against the background of silver amalgam than against the backgrounds of noble metal and resin, but the color differences of the 4 veneered dental ceramics against different backgrounds were unidentifiable by human eyes (δE<1.5).

CONCLUSIONAfter veneered, AL2 electroformed alumina, Z21 electroformed zirconia, Cercon base Zirconia and Cercon base color Zirconia are less influenced by the background color, and covering the background color is therefore not necessary.

OBJECTIVE: This study aimed to compare the effect of D55 and D65 light sources on the visual colorimetry performance of dental students by using a homemade light-source shelf. METHODS: Two Vitapan 3D-Master shade guides were randomly selected. One set was used as shade guides. Ten commonly used shade tabs of 2L2.5, 2M2, 2R2.5, 3M2, 3R2.5, 3L1.5, 3R1.5, 3L2.5, 4R1.5, and 4L1.5 were selected from the other set with covered value marks and numbered from 1 to 10. After the colorimetric training, 49 undergraduate dental students were randomly divided into two groups. Each student randomly selected two of the 10 shade tabs, and the colors were subsequently matched under D65 and D55 light sources from a distance of approximately 40 cm. The average color difference (ΔE) between the color selected by each participant and the actual color of shade tabs was calculated. Paired t test was used for statistical analysis. RESULTS: The ΔE values between the color selected by each participant and the actual color of the shade tabs under the D55 light source varied from 0 to 6.540. The average value was 2.501. The ΔE values between the color selected by each participant and the actual color of the shade tabs under the D65 light source varied from 0 to 6.610. The average value was 2.530. No statistically significant difference was observed between the results under the two light sources (P=0.921). CONCLUSIONS Both D55 and D65 daylight lamps can be used for daily dental colorimetry. These two different color temperatures showed no significant difference.
Color ; Colorimetry ; Dental Prosthesis Design ; Humans ; Prosthesis Coloring ; Students, Dental

The development of clinical implant dentistry was intensively affected by dental implant design improvement and innovation, which brought about new concept, even milestone-like changes of clinical protocol. The current improvements of dental implant design and their clinical importance could be highlighted as followings: 1) The implant apical design influences the implant preliminary stability in immediate implant. The apical 3-5 mm design of implant makes implant stable in immediate implant, because this part would be screwed into alveolar bone through fresh socket, the other part of implant could not be tightly screwed in the socket because of smaller implant diameter. Implant apical form, screw design, self-taping of apical part would be essential for immediate implant. 2) The enough preliminary stability of implant makes immediate prosthesis possible. When osseointegration does not occur, the implant stability comes from a mechanical anchorage, which depends on implant form, screw thread and self-taping design. 3) Implant neck design may have influence for soft tissue recession in esthetic zone. The implant with large shoulder would not be selected for the esthetic area. The platform design may be more favorable in the area. 4) The connection design between implant and abutment is thought a very important structure in implant long-term stability. Moose taper and "tube in tube" were well documented structure design in 20-year clinical practice in Peking University. 5) In last 15 years, the plenty studies showed the platform design of implant had positive influence in implant marginal bone level. Whatever in single implant restoration or multi-implant prosthesis. 6) The digital technology makes clinical work more precise and high-tech. This would be a trend in implant dentistry. New generation of chair-side digital computer-aided design/computer-aided manufacturing makes immediate prosthesis without conventional impression possible. 7) New abutment design have changed clinical protocol greatly. The All-on-four concept and Weldone concept benefit both from the abutment innovation, which were large angulated abutment and special welding abutment materials.
Computer-Aided Design ; Dental Implants ; Dental Prosthesis Design ; Humans ; Osseointegration

OBJECTIVE: To investigate the effects of preparation height and cement space on the fit and retention of computer aided design (CAD)/computer aided manufacturing (CAM) zirconia crown, and to provide reference for the clinical design and fabrication of CAD/CAM crowns. METHODS: 3D printing system was used to fabricate resin abutment teeth with convergence angle of 2° and height of 1-3 mm. The models' optical impressions were collected by the three-shape scanner. Then, the cement spaces were set by Cradle CAD/CAM system at 10-50 μm to create an all-ceramic zirconia crown. The fit of the crowns was measured by using silicone rubber interstitial impression method. The retention of the crowns was measured by pull-off test with uniaxial tensile force after the crown was bonded. The data were analyzed by SPSS 22.0 soft-ware. RESULTS: When the preparation height was fixed, the fitness values of different cement space groups have statistical difference (P<
0.05), whereas the retention values of different cement space groups have no statistical difference (P>0.05). The fitness values of different preparation height groups have no statistical difference (P>0.05), and the retention values of different preparation height groups have statistical difference (P<0.05) when the cement space was fixed. No interaction was observed between the cement space and the preparation height (P>0.05). CONCLUSIONS When cradle CAD/CAM system is used to create a full crown in the clinic, the preparation height should be set to more than 3 mm, and the cement space should be set at 30 μm.
Computer-Aided Design ; Crowns ; Dental Porcelain ; Dental Prosthesis Design ; Zirconium

With the rapid development of digital techniques and the lack of reference standards for chairside computer aided design and computer aided manufacturing (CAD/CAM) operation and application, it is imperative to draft guidelines for chairside CAD/CAM restoration techniques for all ceramics. Therefore, the Society of Prosthodontics, Chinese Stomatological Association recruited experts to compose a recommended application guideline based on the relevant literatures and clinical experiences, including the selection of indications, tooth preparation, optical impression making and other key steps. This guideline is aimed at providing a standardized operation procedure to improve the quality and long-term success rate of chairside CAD/CAM rehabilitation for all ceramics.
Dental Prosthesis Design ; Computer-Aided Design ; Ceramics ; Prosthodontics ; Dental Porcelain

Dental Porcelain ; Dental Prosthesis Design ; Dental Veneers ; Humans