No abstract available.
Adhesives* ; Cyanoacrylates* ; Fracture Fixation*

PURPOSE: The aim of the study was to evaluate the effect of 3 silicone primers and 3 surface characterization of acrylic resin surface on bond strength between silicone elastomer and acrylic resin. MATERIALS AND METHODS: 96 Cosmesil silicones bonded to heat-curing acrylic resin were fabricated with the dimension of 75 x 10 x 3 mm. The 3 primers used in this study were G611 platinum primer, A-330 Gold platinum primer, and cyanoacrylates resin. Specimens without primer were used as control. The 3 types of surface characterization done were retentive holes with 1.5 mm in diameter and 0.5 mm deep, retentive beads of 0.6 mm diameter and the third type which was plain without any characterization. The specimens were then checked for bond strength by subjecting them to 180degrees peel test on a universal testing machine. The obtained results were then subjected to statistical analysis using 2-way ANOVA and Scheffe multiple post hoc procedures. The statistical significance was set at 5% level of significance. RESULTS: The maximum bond strength was seen for samples in which A-330G primer was used followed by G611 primer. The control group showed the minimum bond strength. Surface characterization of retentive holes increased the bond strength considerably as compared to retentive beads and samples without any surface characterization. CONCLUSION: Within the limitations of the study, A-330G primer was more compatible with Cosmesil M511 silicone and has better bonding of Cosmesil to acrylic resin. Retentive holes made on acrylic surface increased the bond strength considerably than those without any surface characterization.
Collodion ; Cyanoacrylates ; Platinum ; Silicone Elastomers

OBJECTIVE: To determine the bonding strength of 2-octyl cyanoacrylate (Dermabond) compared with N-Butyl-2-cyanoacrylate (Histoacryl) and nylon 10-0 (Alcon,) in sealing experimentally induced corneal perforations in cadaver porcine eyes. METHODS: This is a single-blind, randomized, physical experimental study involving 78 freshly enucleated porcine eyes in which perforations of 3.0 and 5.1 mm were made in the cornea and randomly sealed with either interrupted nylon 10-0 (n=13), Dermabond (n=13), or Histoacryl (n=13). Intraocular pressures were raised by injecting normal saline into the anterior chamber and postsealing leaking pressures were measured using a precalibrated manometer attached to the anterior chamber maintainer. Fishers Exact Test was used to determine the difference in proportion of eyes that leaked, and Wilcoxon signed ranked test to compare the mean leaking pressures. RESULTS: In the 3.0 mm group, the proportion of eyes that leaked in Dermabond (2/13, 15.4 percent) and Histoacryl (1/13, 7.7 percent) were comparable (p=1.00). Proportion of leak in nylon 10-0 (13/13, 100 percent) was significantly higher (p0.001). Mean leaking pressures of Dermabond (79.5 mm Hg) and Histoacryl (88.0 mm Hg) were higher compared with that of nylon 10-0 (61.44 mm Hg) (p 0.05). In the 5.1 mm group, proportion of eyes that leaked in Dermabond (4/13, 30.8 percent) and Histoacryl (2/13, 15.4 percent) were comparable (p=0.07 AND P=0.10). CONCLUSION: The bonding strengths of Dermabond and Histoacryl are comparable and greater than that of nylon 10-0. Both are effective for 3.0 mm and 5.1 mm corneal perforations.
Animal ; CYANOACRYLATES ; ENBUCRILATE ; CORNEAL PERFORATION

Intracranial pial single-channel arteriovenous fistula is a rare vascular lesion distinct from plexiform arteriovenous malformation. We report 2 cases of intracranial small pial single-channel arteriovenous fistula which was successfully treated with n-butyl cyanoacrylate.
Arteriovenous Fistula* ; Arteriovenous Malformations ; Cyanoacrylates*

No abstract available.
Adhesives* ; Cyanoacrylates* ; Herniorrhaphy* ; Polyesters* ; Titanium*

Cyanoacrylate closure, VenaSeal system, for the treatment of incompetent saphenous vein is a new technique. We report a successful case with a large great saphenous vein of 2.84 cm in diameter.
Cyanoacrylates ; Saphenous Vein* ; Varicose Veins

AIM: To assess the efficacy of cyanoacrylate adhesive in the management of large perforations of the maxillary sinus membrane during sinus lifts. MATERIAL AND METHODS: Eight rabbits were used in the study. Sinus membrane perforation(about 1.5cm) was repaired with cyanoacrylate adnesive on one side of the maxillary sinus and the opppsite side was used as a control. Histological evaluation was performed 4 weeks after the operation. RESULTS: Histological studies showed normal healing of the sinus membrane across the site of previous perforation and no evidence of inflammation. CONCLUSION: Our results support the clinical use of cynoacrylate adhesive for repairing sinus membrane perforation.
Adhesives* ; Cyanoacrylates* ; Inflammation ; Maxillary Sinus ; Membranes* ; Rabbits

Blow-out fracture is a fracture of the weadk bony orbital floor resulting from the transmission of intraorbital pressure in a blunt trauma. In this report, I analyse the clinical aspects of 27 patients who were treated with cyanoacrylate during open reduction. The leading cause was a traffic accident(17 patients, 63%). In addutuib. the inferior wall of the orbit was the most frequent site of fracture(22 patients, 81%). The interval between the onset of injury and the operatuib averaged 7.3days. The most common clinical sign helpful in diagnosing the blow-out fracture is the lid sign-ecchymosis and edema(26 patients, 96%); but, diplopia, positive forced duction test and enophthalmos were found in under 30% of the cases. The operations were done by infraciliary approach in most cases, and a silastic sheet was firmly attached to the site of fracture with cyanoacrylate. In all cases examined, there were no significant complications. In conclusion, I am convinced that the use of cyanoacrylate during the placement of silastic sheet for the treatment of blow-out fracture makes a firm adhesion, prevents reherniation of tissue and protrusion of the implant and also reduces complications.
Cyanoacrylates* ; Diplopia ; Enophthalmos ; Humans ; Orbit ; Orbital Fractures*

OBJECTIVETo explore a simple but novel method of strengthening gypsum material by cyanoacrylate infiltration. To evaluate the influence of cyanoacrylate on the mechanical properties of dental gypsum models.

METHODSGypsum specimens were polished to the dimension of 35 mmx4 mmx4 mm. Butyl-cyanoacrylate was diluted with chloroform at different concentrations, namely 20% and 30% cyanoacrylate. Gypsum specimens were infiltrated by diluting one component of cyanoacrylate at different concentrations for 8 h and then dried for analysis. The changes in elastic modulus, fracture toughness, compressive strength, biaxial strength, brinell hardness were measured. The data were analyzed using software OriginPro 8.

RESULTSThe viscosity measurements indicated that diluted cyanoacrylate were Newtonian fluids and the viscosity increased slightly within the 48 hours of preparation but still similar as water at room temperature, which could be used to infiltrating gypsum. The gypsum infiltrated with cyanoacrylate exhibited good physicochemical properties. The biaxial strength, fracture toughness, compressive strength and brinell hardness of the gypsum were improved by 39%, 30%, 63% and 18%, respectively.

CONCLUSIONCyanoacrylate can significantly improve the strength of gypsum model which indicates the potential clinical application.

PURPOSE: Nailbed repair using fine 6-0 or 7-0 absorbable sutures can be technically demanding and time-consuming. We describe a simpler method of nailbed repair using 2-octyl cyanoacrylate (Dermabond(R)) topical adhesive. MATERIALS AND METHODS: Fifteen consecutive patients with nailbed injuries not involving the germinal matrix were repaired with Dermabond(R). There were 7 simple lacerations, 4 stellate lacerations and 4 severe crush injury according to Zook's classification. The appearance of the nail at twelve months was graded according to ridging, splitting, deformity, and sheen of the nail. RESULTS: Nailbed repairs using Dermabond(R) took on average 3.2 minutes to complete. Six patients had excellent aesthetic results, Eight had good results, and one patient with a crush injury had a fair result. There were no complications. CONCLUSION: Dermabond(R) is a useful tool for rapidly repairing acute nailbed injuries. The outcome of repairing injuries not involving the germinal matrix is similar to that expected for suture repairs of similar injuries.
Adhesives ; Congenital Abnormalities ; Cyanoacrylates ; Humans ; Lacerations ; Nails ; Sutures