ObjectiveTo analyze the "compatibility" relationship of sugars and glycosides and the heat-clearing and blood-cooling effect of the roots of four varieties of Rehmannia glutinosa and provide a basis for research on the pharmacodynamic material basis and quality control of R. glutinosa. MethodsThe content of sugars and glycosides in the roots of four varieties of R. glutinosa was determined during the growth period. The principal component analysis （PCA）， orthogonal partial least squares-discriminant analysis （OPLS-DA）， and the "compatibility" relationship of active components were employed to screen out the differential samples. A rat model of bleeding due to blood heat was used to verify the pharmacodynamic differences and the potential active components of differential samples. ResultsThe content and proportion characteristics of various components in roots of the four varieties of R. glutinosa during the expansion stage and the maturity stage had obvious differences. The proportion of phenylethanoid glycosides at the maturity stage was higher than that at the expansion stage. The R. glutinosa variety 85-5 had special quality characteristics among the tested varieties. All the samples alleviated the symptoms in the rat model. The effect of clearing heat and cooling blood was different between the maturity stage and the expansion stage， as well as between 85-5 samples at the maturity stage and other samples. The effect of clearing heat and cooling blood of R. glutinosa roots was the result of the combined action of multiple components in R. glutinosa roots and might be related to the high proportions of polysaccharides， iridoid glycosides， and phenylethanoid glycosides. ConclusionThe growth stage and variety affect the quality of R. glutinosa roots. The effect of clearing heat and cooling blood of R. glutinosa roots was related to the content and proportions of various components. The study can provide a basis for the basic research on the active components and quality control of R. glutinosa.

ObjectiveTo analyze the "compatibility" relationship of sugars and glycosides and the heat-clearing and blood-cooling effect of the roots of four varieties of Rehmannia glutinosa and provide a basis for research on the pharmacodynamic material basis and quality control of R. glutinosa. MethodsThe content of sugars and glycosides in the roots of four varieties of R. glutinosa was determined during the growth period. The principal component analysis （PCA）， orthogonal partial least squares-discriminant analysis （OPLS-DA）， and the "compatibility" relationship of active components were employed to screen out the differential samples. A rat model of bleeding due to blood heat was used to verify the pharmacodynamic differences and the potential active components of differential samples. ResultsThe content and proportion characteristics of various components in roots of the four varieties of R. glutinosa during the expansion stage and the maturity stage had obvious differences. The proportion of phenylethanoid glycosides at the maturity stage was higher than that at the expansion stage. The R. glutinosa variety 85-5 had special quality characteristics among the tested varieties. All the samples alleviated the symptoms in the rat model. The effect of clearing heat and cooling blood was different between the maturity stage and the expansion stage， as well as between 85-5 samples at the maturity stage and other samples. The effect of clearing heat and cooling blood of R. glutinosa roots was the result of the combined action of multiple components in R. glutinosa roots and might be related to the high proportions of polysaccharides， iridoid glycosides， and phenylethanoid glycosides. ConclusionThe growth stage and variety affect the quality of R. glutinosa roots. The effect of clearing heat and cooling blood of R. glutinosa roots was related to the content and proportions of various components. The study can provide a basis for the basic research on the active components and quality control of R. glutinosa.

Duchenne Muscular Dystrophy （DMD） is an X-linked recessive inherited myopathy caused by a pathogenic variant of the amyotrophic protein gene. Currently， DMD patients have needs for treatment， education， and social integration at different stages of the disease. Faced with the multiple needs of DMD patients， based on the professional value and ethics of social work， the integrative orientation of social work， and the multiple roles of social workers， social workers can build a comprehensive service system centred on DMD patients and provide multiple services. Specifically， social work intervention paths can enhance the health and well-being of DMD patients and improve their quality of life by providing various services such as in-hospital and out-of-hospital health management， psychological support， resource links， empowerment， construction of social support networks， science popularization， and policy advocacy.

OBJECTIVE: To investigate the accuracy and safety of pedicle screw placement using 3D-printed auxiliary guides in scoliosis correction surgery for adolescents. METHODS: A retrospective analysis was conducted on the clinical data of 51 patients who underwent posterior scoliosis correction surgery from January 2020 to March 2023. Among them, there were 35 cases of adolescent idiopathic scoliosis and 16 cases of congenital scoliosis. The patients were divided into two groups based on the auxiliary tool used:the 3D-printed auxiliary guide screw placement group (3D printing group) and the free-hand screw placement group (free-hand group, without auxiliary tools). The 3D printing group included 32 patients (12 males and 20 females) with an average age of (12.59±2.60) years;the free-hand group included 19 patients (7 males and 12 females) with an average age of (14.58±3.53) years. The two groups were compared in terms of screw placement accuracy and safety, spinal correction rate, intraoperative blood loss, number of intraoperative fluoroscopies, operation time, hospital stay, and preoperative and last follow-up scores of the Scoliosis Research Society-22 (SRS-22) questionnaire. RESULTS: A total of 707 pedicle screws were placed in the two groups, with 441 screws in the 3D printing group and 266 screws in the free-hand group. All patients in both groups successfully completed the surgery. There was a statistically significant difference in operation time between the two groups (P<0.05). The screw placement accuracy rate of the 3D printing group was 95.46% (421/441), among which the Grade A placement rate was 89.34% (394/441);the screw placement accuracy rate of the free-hand group was 86.47% (230/266), with a Grade A placement rate of 73.31% (195/266). There were statistically significant differences in the accuracy of Grade A, B, and C screw placements between the two groups (P<0.05), while no statistically significant differences were observed in intraoperative blood loss, number of fluoroscopies, correction rate, or hospital stay (P>0.05). In the SRS-22 questionnaire scores, the scores of functional status and activity ability, self-image, mental status, and pain of patients in each group at the last follow-up were significantly improved compared with those before surgery (P<0.05), but there were no statistically significant differences in all scores between the two groups (P>0.05). CONCLUSION In scoliosis correction surgery, compared with traditional free-hand screw placement, the use of 3D-printed auxiliary guides for screw placement significantly improves the accuracy and safety of screw placement and shortens the operation time.
Humans ; Male ; Scoliosis/surgery* ; Female ; Adolescent ; Printing, Three-Dimensional ; Retrospective Studies ; Pedicle Screws ; Child

eIF3a is a N ⁶-methyladenosine (m⁶A) reader that regulates mRNA translation by recognizing m⁶A modifications of these mRNAs. It has been suggested that eIF3a may play an important role in regulating translation initiation via m⁶A during infection when canonical cap-dependent initiation is inhibited. However, the death of animal model studies impedes our understanding of the functional significance of eIF3a in immunity and regulation in vivo. In this study, we investigated the in vivo function of eIF3a using eIF3a knockout and knockdown mouse models and found that eIF3a deficiency resulted in splenic tissue structural disruption and multi-organ damage, which contributed to severe sepsis induced by Lipopolysaccharide (LPS). Ectopic eIF3a overexpression in the eIF3a knockdown mice rescued mice from LPS-induced severe sepsis. We further showed that eIF3a maintains a functional and healthy immune system by regulating B cell function and quantity through m⁶A modification of mRNAs. These findings unveil a novel mechanism underlying sepsis, implicating the pivotal role of B cells in this complex disease process regulated by eIF3a. Furthermore, eIF3a may be used to develop a potential strategy for treating sepsis.

Triple-negative breast cancer is therapeutically challenging due to the low expression of tumor markers and 'cold' tumor immunosuppressive microenvironment. Here, we present a dual-targeting peptide-drug conjugate (PDC) for tumor inhibition. Our PDC efficiently and selectively delivers cytotoxic Monomethyl Auristatin E (MMAE) into tumor cells via C-X-C chemokine receptor type 4 (CXCR4) and folate receptor 1 (FOLR1) for synergistic inhibition of growth and metastasis. Our results show that the dual-targeting PDC has potent antitumor activity in cultured human cells and several murine transplanted tumor models without apparent toxicity. The combination of dual-targeting PDC and radiotherapy modulates the tumor immunosuppressive microenvironment by increasing CD8⁺ T cell infiltration and attenuating the proportion of myeloid-derived suppressor and regulatory T cells. Therefore, our dual-targeting PDC represents a promising new strategy for cancer therapy that rebalances the immune system and promotes tumor regression.

Traditional development of small protein scaffolds has relied on display technologies and mutation-based engineering, which limit sequence and functional diversity, thereby constraining their therapeutic and application potential. Protein design tools have significantly advanced the creation of novel protein sequences, structures, and functions. However, further improvements in design strategies are still needed to more efficiently optimize the functional performance of protein-based drugs and enhance their druggability. Here, we extended an evolution-based design protocol to create a novel minibinder, BindHer, against the human epidermal growth factor receptor 2 (HER2). It not only exhibits super stability and binding selectivity but also demonstrates remarkable properties in tissue specificity. Radiolabeling experiments with ^99mTc, ⁶⁸Ga, and ¹⁸F revealed that BindHer efficiently targets tumors in HER2-positive breast cancer mouse models, with minimal nonspecific liver absorption, outperforming scaffolds designed through traditional engineering. These findings highlight a new rational approach to automated protein design, offering significant potential for large-scale applications in therapeutic mini-protein development.

Objective:The effect of bone marrow soluble B cell maturation antigen (sBCMA) expression on the efficacy and side effects of chimeric antigen receptor (CAR) -modified T-cell-targeting B cell maturation antigen (BCMA) in patients with multiple myeloma (MM) .Methods:This study involved 29 patients with relapsed or refractory MM (RRMM) who received humanized anti-BCMA CAR-T cell clinical trials from January 2018 to December 2021. The expression of sBCMA in bone marrow before and after anti-BCMA CAR-T cell treatment was detected by flow cytometry and compared.Results:①Two months after BCMA CAR-T cell treatment, 20 patients (68.97%) achieved an overall response (OR), whereas nine patients had stable disease (SD) or miner emission (MR). ②The expression of sBCMA in the bone marrow of 20 patients with OR was higher before treatment than after [26 926 (18 215, 32 488) ng/L vs 9 968 (6 634, 11 459) ng/L; P<0.001]; no significant difference was observed in patients with MR and SD [41 187 (33 816, 47 046) ng/L vs. 33 954 (31 569, 36 256) ng/L; P=0.145]; sBCMA expression in patients with OR before CAR-T cell treatment was lower than in patients with MR and SD ( P=0.005). ③No significant linear correlation was found between the peak value of CAR-T cells and sBCMA expression in the bone marrow of all 29 patients with RRMM ( R2=0.035, P=0.330). ④No significant difference in sBCMA expression was found between grades 0-1 CRS group (13 patients) and grades 2-4 CRS group [16 patients; 32 045 (18 742, 40 801) ng/L vs 29 102 (24 679, 38 776) ng/L, P=0.879], nor between grade 0 ICANS group (22 patients) and grade 1-3 ICANS group [seven patients; 30 073 (19 375, 40 065) ng/L vs 33 816 (22 933, 43 459) ng/L, P=0.763]. Conclusion:sBCMA expression in the bone marrow is related to the efficacy of BCMA CAR-T cell therapy in patients with RRMM, but is not significantly correlated with the severity of adverse events. It may serve as a predictive biomarker for the efficacy of BCMA CAR-T cell therapy in these patients.

Objective To develop a GIS-based 3D playback system for the flight human-plane data to realize the fusion of pilots'airborne flight data and physiological data.Methods The 3D playback system was developed with the Browser/Server(B/S)architecture,micro-server model,Java language and Spring Cloud technology framework,which was composed of three functional modules for flight process reproduction,physiological situational awareness and critical event calibration analysis.Results The system developed achieved time synchronization and data fusion of airborne flight data and physiological data with a time synchronization frequency of 1 Hz and a refresh rate of not less than 120 frames/s.Conclusion The system developed with high safety,stability,reliability and accuracy facilitates pilot in-flight physiological monitoring and fusion and simultaneous display of airborne flight data and physiological data,which can be used as an important platform for decision-making support in flight training.[Chinese Medical Equipment Journal,2024,45(10):14-19]