1.New Record of Lecanora muralis (Lichenized Fungus) in South Korea.
Xin Li WEI ; Keon Seon HAN ; You Mi LEE ; Young Jin KOH ; Jae Seoun HUR
Mycobiology 2007;35(2):45-46
Lecanora muralis was found on the rock along coastal line during the field trip in Jeju island in 2006. Thallus crustose, placodioid, closely adnate, forming orbicular patches; upper surface grayish green, glossy; central lobes areolate, marginal parts plane, edges thin pruinose; lower surface ecorticate; apothecia sessile, lecanorine type, exciple dense and intact when young, and disc plane, but when mature, exciple laciniate, disc protrudent, yellowish brown to orange, 0.5~1.5 mm in diameter; ascospores ellipsoid, simple, colorless, 12.5~15.0 x 5.0~7.5 microm. Usnic acid and zeorin contained in thallus. This is the first record of this species in South Korea.
Citrus sinensis
;
Korea*
2.Comparative study on morphology of cross-section and cyclic fatigue test with different rotary NiTi files and handling methods.
Jae Gwan KIM ; Kee Yeon KUM ; Eui Seong KIM
Journal of Korean Academy of Conservative Dentistry 2006;31(2):96-102
There are various factors affecting the fracture of NiTi rotary files. This study was performed to evaluate the effect of cross sectional area, pecking motion and pecking distance on the cyclic fatigue fracture of different NiTi files. Five different NiTi files-Profile(R)(Maillefer, Ballaigue, Switzerland), ProTaper(TM) (Maillefer, Ballaigue, Switzerland), K3(R) (SybronEndo, Orange, CA), Hero 642(R) (Micro-mega, Besancon, France), Hero Shaper(R)(Micro-mega, Besancon, France)-were used. Each file was embedded in temporary resin, sectioned horizontally and observed with scanning electron microscope. The ratio of cross-sectional area to the circumscribed circle was calculated. Special device was fabricated to simulate the cyclic fatigue fracture of NiTi file in the curved canal,. On this device, NiTi files were rotated (300rpm) with different pecking distances (3 mm or 6 mm and with different motions (static motion or dynamic pecking motion). Time until fracture occurs was measured. The results demonstrated that cross-sectional area didn't have any effect on the time of file fracture. Among the files, Profile(R) took the longest time to be fractured. Between the pecking motions, dynamic motion took the longer time to be fractured than static motion. There was no significant difference between the pecking distances with dynamic motion, however with static motion, the longer time was taken at 3mm distance. In this study, we could suggest that dynamic pecking motion would lengthen the time for NiTi file to be fractured from cyclic fatigue.
Citrus sinensis
;
Fatigue*
;
Fractures, Stress
3.Comparative studies of retentive forces in maxillary overdenture bar attachments.
Cha Young SON ; Chang Mo JEONG ; Young Chan JEON ; Jang Seop LIM ; Hee Chan JEONG
The Journal of Korean Academy of Prosthodontics 2005;43(5):650-661
STATEMENT OF PROBLEM: It could be hypothesised that attachments, which provide more retention against vertical and horizontal dislodgement, will be associated with more favorable parameters of oral function. PURPOSE: This study was to provide data of initial retentive force and retention loss of different bar attachment systems recommended for use with maxillary implant overdentures. MATERIAL AND METHOD: 4 implants were placed in the anterior region of edentulous maxilla, five different systems of bar attachment were fabricated as follows: cantilevered Hader bar using clips (Type 1), Hader bar using clips without cantilever (Type 2), Hader bar using clip and ERA attachment orange male (Type 3), Hader bar using clip and ERA attachment white male (Type 4), and Bar using magnets (Type 5). Each samples were placed in the universal testing machine for determination of retentive forces(at initial and after every 200 cycles up to 1,000 cycles). Results and Conclusion 1. Attachment type 1 showed the biggest initial retentive force followed by type 3, type 2, type 4, and lastly type 5( p<0.001). 2. After 1,000 cycles of repeated removals of attachments, significant loss of retentive forces was taken place except for attachment type 5. 3. After 1,000 cycles of repeated removals, the loss of retentive force between type 1 and type 2, which used Hader bar and clip attachments, was greater in type 1 that had wider clip formation. And between type 3 and type 4, which used ERA attachments, the loss of retentive force was greater in type 4 that had white male attached (p<0.001). 4. After 1,000 cycles of repeated removals, attachment type 3 showed the biggest retentive force followed by type 2, type 4, type 1 and lastly type. 5. There was no significant difference between attachment type 3 and 4, and type 4 and 1(p<0.001).
Citrus sinensis
;
Denture, Overlay*
;
Humans
;
Male
;
Maxilla
4.Effect on the Color Stability of Stained Porcelain due to Tooth Brushing.
Im Gi LEE ; Jun Oh JEONG ; Charn Woon PARK
The Journal of Korean Academy of Prosthodontics 2002;40(2):172-183
This study is going to compare the degree of color change which occurs in the following two cases of the factors which cause the color change of extra-staining,one is during glazing by the dental technician,the other is tooth brush abrasion which makes the biggest influence on color change. To compare the degree of color change before and after glazing,a sample was made with vintage incisal porcelain No.59 OPAL(Shofu Inc,Japan),after that it was painted with three colors of porcelain stainers,then the degree of color was measured with a spectrophometer(Model Chromaview 300,Spectoron Tech Co.Korea)after it had been treated with firing only and glazing after firing. 40,000-cycle and 80,000-cycle of tooth brush abrasion test were carried out in order to simulate the brushing effect of 4 years and 8 years by using the abrasion tester.The colors were mesured before the test,and after the 40,000-cycle and 80,000-cycle operations and the surfaces were examined by SEM. The results of this study were as follows ; 1.The color change before and after glazing was not great enough to have a clinical significance but the orange color was changed more significantly statistically than the blue and light brown(P<0.05). 2.In the case of the color change of stained porcelain by tooth brushing,carrying out staining and glazing with two-times firings resulted in statically less color change than one firing only(P<0.05). 3.In the case of the difference in the stainer's color,the orange color which has higher chroma was statically more sensitive than the blue color(P<0.05). 4.In the case of the color change after the 80,000-cycle abrasion,all showed color change when there was one firing and the orange stainer showed some color change with clinical significance when firings were done two times.
Citrus sinensis
;
Dental Porcelain*
;
Fires
;
Paint
;
Tooth*
5.Thin - Layer Chromatography Search for Disperce Yellow 3 and Disperce Orange 3 in 60 Brownish Stockings.
Heung Bae PARK ; Hee Chul EUN ; Yoo Shin LEE
Korean Journal of Dermatology 1988;26(3):298-305
Thin-layer (uni-dimensional and bi-dimensional) chrornatography studies were performed on 60 brownish stockings from 12 companies in Korea to search for Disperse Yellow 3 and Disperse Orange 3, which are known as common sensitizers in textiles. The results were as follows : 1) Mixture of various-colored dyes were being used to reveal the brownish hue in the stockings. 2) TLC demonstrated the presence of Disperse Yellow 3 in 53 stocking. 3) TLC demonstrated the presence of Disperse Orange 3 in 3 stockings, Although lack or more sophisticsted tests such as spectroseopic, infra red or nuclear spectra identification. These results suggest a strong clue to the presence of Disperse Yellow 3 and Disperse Orange 3 in the commercial stocking now being used in Korea.
Chromatography*
;
Citrus sinensis*
;
Coloring Agents
;
Korea
;
Textiles
6.Hesperetin Stimulates Cholecystokinin Secretion in Enteroendocrine STC-1 Cells.
Hye Young KIM ; Min PARK ; Kyong KIM ; Yu Mi LEE ; Mee Ra RHYU
Biomolecules & Therapeutics 2013;21(2):121-125
Hesperetin (3',5,7-trihydroxy 4'-methoxyflavanone) and its glycoside hesperidin (hesperetin 7-rhamnoglucoside) in oranges have been reported to possess pharmacological effects related to anti-obesity. However, hesperetin and hesperidin have not been studied on suppressive effects on appetite. This study examined that hesperetin and hesperidin can stimulate the release of cholecystokinin (CCK), one of appetite-regulating hormones, from the enteroendocrine STC-1 cells, and then examined the mechanisms involved in the CCK release. Hesperetin significantly and dose-dependently stimulated CCK secretion with an EC50 of 0.050 mM and increased the intracellular Ca2+ concentrations ([Ca2+]i) compared to the untreated control. The stimulatory effect by hesperetin was mediated via the entry of extracellular Ca2+ and the activation of TRP channels including TRPA1. These results suggest that hesperetin can be a candidate biomolecule for the suppression of appetite and eventually for the therapeutics of obesity.
Appetite
;
Cholecystokinin*
;
Citrus sinensis
;
Enteroendocrine Cells
;
Hesperidin
;
Obesity
7.A Case of Segmental Lichen Aureus.
Jae Yong BAHN ; Yun Suck KIM ; Sang Jin KWON ; Hee Joon YU
Korean Journal of Dermatology 1999;37(6):798-800
Lichen aureus is a variant of pigmented purpuric lichenoid dermatitis. The skin lesions usually appear asymptomatic rusty, copper, or orange colored roundish lichenoid erythematous-purpuric papules and patches on the lower extremities. Histologically, the epidermis shows minimal changes, with a dense lymphohistiocytic infiltrate observed in the superficial derrnis, typically distributed in a band-like fashion. The typical lesion is a single patch localized on the lower extremity. We report a rare case of segmental lichen aureus localized on the right lower extremity.
Citrus sinensis
;
Copper
;
Dermatitis
;
Epidermis
;
Lichens*
;
Lower Extremity
;
Skin
8.Effect of dentin surface wetness on tensile bond strength of self adhesive resin cements.
Sung Young YOON ; Se Hee PARK ; Jin Woo KIM ; Kyung Mo CHO
Journal of Korean Academy of Conservative Dentistry 2009;34(2):113-119
The purpose of this study was to compare the tensile bond strength of several self-adhesive resin cements bonded to dentin surfaces with different wet conditions. Three self-adhesive resin cements; Rely-X Unicem (3M ESPE, St. Paul, MN, USA), Embrace Wetbond (Pulpdent, Oakland, MA, USA), Maxcem (Kerr, Orange, CA, USA) were used. Extracted sixty human molars were used. Each self-adhesive resin cement was adhered to the dentin specimens (two rectangular sticks from each molar) in different wet conditions. Tensile bond strength were measured using universal testing machine (EZ Test, Shimadzu corporation, Kyoto, Japan) at a crosshead speed of 1.0mm/min. After the testing, bonding failures of specimens were observed by Operative microscope (OPMI pro, Carl Zeiss, Oberkochen, Germany). T-test was used to evaluate the effect of dentin surface wetness. One-way ANOVA test was used to evaluate the tensile bond strength of self-adhesive resin cements in the same condition. Scheffe's test was used for statistical analyzing at the 95% level of confidence. The result showed that wetness of dentin surface didn't affect tensile bond strength of self-adhesive resin cements and Maxcem showed the lowest tensile bond strength.
Adhesives
;
Citrus sinensis
;
Collodion
;
Dentin
;
Humans
;
Molar
;
Resin Cements
9.Fruiting Body Formation of Cordyceps militaris from Multi-Ascospore Isolates and Their Single Ascospore Progeny Strains.
Bhushan SHRESTHA ; Sang Kuk HAN ; Jae Mo SUNG ; Gi Ho SUNG
Mycobiology 2012;40(2):100-106
Interest in commercial cultivation and product development of Cordyceps species has shown a recent increase. Due to its biochemical and pharmacological effects, Cordyceps militaris, commonly known as orange caterpillar fungus, is being investigated with great interest. Cultivation of C. militaris has been practiced on a large scale in order to fulfill a demand for scientific investigation and product development. Isolates of C. militaris can be easily established from both spores and tissue. For isolation of spores, ascospores released from mature stromata are trapped in sterile medium. Multi-ascospore isolates, as well as combinations of single ascospore strains, are used for production of fruiting bodies. Progeny ascospore strains can be isolated from artificial fruiting bodies, thus, the cycle of fruiting body production can be continued for a long period of time. In this study, we examined fruiting body production from multi-ascospore isolates and their progeny strains for three generations. F1 progeny strains generally produced a larger number of fruiting bodies, compared with their mother multi-ascospore isolates; however, F2 and F3 progeny strains produced fewer fruiting bodies. Optimum preservation conditions could help to increase the vitality of the progeny strains. In order to retain the fruiting ability of the strains, further testing of various methods of preservation and different methods for isolation should be performed.
Citrus sinensis
;
Cordyceps
;
Family Characteristics
;
Fruit
;
Fungi
;
Humans
;
Mothers
;
Spores
10.A Case of Epidermodysplasia Verruciformis Related with Agent Orange.
Sanghoon LEE ; Seung Huun CHUN ; Hana BAK ; Soo Young JEON ; Sung Ku AHN
Korean Journal of Dermatology 2003;41(9):1268-1270
Epidermodysplasia verruciformis(EV) is a rare, often familial disease, associated with human papilloma virus. It is characterized by long-lasting, wide-spread wart-like or pityriasis versicolor-like lesions from early childhood and in about one-third patients, cutaneous carcinomas develop in adult life. We report a case of 57-year-old male with EV, with lesions only on the left forearm and the hand, who had been exposed to Agent Orange during Vietnam War.
Adult
;
Citrus sinensis*
;
Epidermodysplasia Verruciformis*
;
Forearm
;
Hand
;
Humans
;
Male
;
Middle Aged
;
Papilloma
;
Pityriasis
;
Vietnam