OBJECTIVETo explore the clinical application of mandibular-driven simultaneous maxillo-mandihular distraction to correct hemifacial microsomia with rapid prototyping technology.

METHODSThe patient' s skull resin model was manufactured with rapid prototyping technology. The osteotomy was designed on skull resin model. According to the preoperative design, the patients underwent Le Fort I osteotomy and mandibular ramus osteotomy. The internal mandible distractor was embedded onto the osteotomy position. The occlusal titanium pin was implanted. Distraction were carried out by mandibular-driven simultaneous maxillo-mandihular distraction 5 days after operation.

RESULTSThe distraction in five patients was complete as designed. No infection and dysosteogenesis happened. The longest distance of distraction was 28 mm, and the shortest distance was 16 mm. The facial asymmetry deformity was significantly improved at the end of distraction. The ocelusal plane of patients obviously improved.

CONCLUSIONSRapid prototyping technology is helpful to design precisely osteotomy before operation. Mandibular-driven simultaneous maxillo-mandibular distraction can correct hemifacial microsomia. It is worth to clinical application.

Face ; abnormalities ; surgery ; Facial Asymmetry ; congenital ; surgery ; Goldenhar Syndrome ; surgery ; Humans ; Hyperplasia ; surgery ; Mandible ; surgery ; Maxilla ; surgery ; Osteogenesis, Distraction ; methods ; Osteotomy ; methods ; Osteotomy, Le Fort

A promoter-trap vector pGBT14 for selecting promoters of fungus gene was constructed with E. coli-yeast shuttling plasmid pGBT9. Using this vector, a0. 5-2. 0kb chromosomal DNA library of Cepholosporium acremonium was constructed, and twenty four DNA fragments with promoter function in Saccharomyces oerevisiae Y153 were selected from this DNA library. And the promoter function of these DNA fragments was analyzed.

· ATM:To analyze bacterial spectrum and drug sensitivity in conjunctival sac of cataract patients of Kazak.
· METHODS:A total of 538 cases of conjunctival sac secretion in cataract patients of Kazak were collected.The samples were cultured and their sensibilities to antibiotics were tested.
· RESULTS: The bacterial culture was positive in 214 cases.The positive rate was 39.8%. The variety of pathogenic bacteria were mainly made up of gram positive cocci ( 88.3%), and most of them were Staphylococcus epidermidis ( 66.4%), followed by Micrococcus(9.8%).Sex had no effect on conjunctival bacteria rate in the cataract patients of Kazak, while age, place of residence had an effect on camier rate. The camier rate of conjunctival bacteria was significantly higher in people over 60 years old than that in people with age between 40 to 59 years old.And the people from city had a significant lower bacteria positive rate than those from countryside and pastoral. Most of grams were sensitive to Vancomycin, Teicoplanin, Rifampicin, Duly cloth mildew mutual and Amikacin, the tolerance was less than 20%, and they usually had higher tolerance to Penicillin, Erythromycin, Tetracycline and Chloramphenicol (>70%) .
·CONCLUSlON:Gram positivecocci is the most common bacteria in conjunctival sac in cataract patients of Kazak. Staphylococcus epidermidis was most common, followed by Micrococcus.The germ-carrying rate of conjunctival SAC in Kazakh population is associated with the patient’s age and area of residence.The clinical use of antibacterial drugs should be strictly grasp the indications, to reduce the incidence of bacterial resistance.

OBJECTIVETo investigate the association of polymorphisms in the apolipoprotein B gene (APOB) 3'variable number of tandem repeat with natural longevity in the Xinjiang Uighur nationality people.

METHODSTotally 191 healthy individuals over 90 years and 53 individuals aged 65-70 years were recruited among Xinjiang Uighur population, the nationality, gender and living area were matched. Genotyping was performed using polymerase chain reaction-sequence specific primer(PCR-SSP) and PCR-sequencing.

RESULTSFourteen alleles were found in the Xinjiang Uighur nationality population. The frequency of HVE36 and HVE42 in the natural longevity group were significantly higher than that in the control group (both P<0.05) and HVE44, HVE46, HVE48 and HVE58 were only found in the natural longevity group. However, the frequency of HVE26, HVE30 and HVE34 were markedly lower in the natural longevity group compared to the control group. Logistic regression analyses revealed that allele L and the genotypes LL were positively associated with age, whereas the allele S and genotype SS were negatively associated with age (both P<0.05). Each allele consists of 15 bp tandem repeats with rich-AT by PCR-sequencing.

CONCLUSIONThese results indicate that the S allele, and SS genotype are frail factors in China Uighur natural longevity people, whereas allele L and genotypes LL are protective factors.

Aged ; Aged, 80 and over ; Apolipoproteins B ; genetics ; Base Sequence ; China ; Female ; Gene Frequency ; Genotype ; Humans ; Longevity ; genetics ; Male ; Middle Aged ; Minisatellite Repeats ; genetics ; Molecular Sequence Data ; Polymerase Chain Reaction ; Polymorphism, Genetic ; genetics

OBJECTIVETo screen and isolate secondary metabolite biosynthesis-related gene for establishing the foundation of functional gene research, we construct a cDNA library of Glycyrrhiza uralensis.

METHODTotal RNA was isolated from G. uralensis using the method of lithium chloride sedimentation. Double strand cDNA was joined into pBlueScript II vector. The number of clones, recombinant rate and length of insert fragments were determined.

RESULTThe capacity of the original library was 1.15 x 10(7) with a recombinant rate of 98.2% and the inserted cDNA fragments ranged from 0.5 to 4.8 kb. 126 ESTs through random sequencing were obtained. The most homological proteins came from leguminous plants, including Arabidopsis thaliana, Oryza sativa, and so on. Most of the proteins were related to genes linking cell matabolism, resistance, growth retardation and dormancy.

CONCLUSIONThe library has enough capacity, high recombinant rate and long insert fragment for the further study.

Computational Biology ; DNA, Recombinant ; genetics ; Electrophoresis, Agar Gel ; Expressed Sequence Tags ; Gene Library ; Glycyrrhiza uralensis ; genetics ; RNA, Messenger ; analysis ; genetics ; RNA, Plant ; analysis ; genetics ; Sequence Analysis, DNA

OBJECTIVETo present a method of quantitative diagnosis of craniofacial skeleton deformities based on three-dimensional computed tomography (3D CT).

METHODS20 cases with facial asymmetric deformities underwent 3D CT and the 3D images were reconstructed by Mimics 10.0 (Belgium). Anatomical landmarks were located and the coordinate of the landmarks obtained. Axial images of 1 patient with Romberg disease was used as representative case. The differences in the distance between the right landmarks and the left were calculated and analyzed.

RESULTSThe measurement results were not significantly different between two stages with an interval of 4 weeks ( P > 0.05), showing a reproducible resutls. The deviation of landmarks at facial midline increased gradually from upward to downward, reaching (2.63 +/- 0.54) mm at menton point. Paired landmarks showed asymmetry in three dimensions, especially gonion point on the left side, which was deviated 10.21 mm inward, 9.26 mm forward, 6.30 mm upward, compared to the opposite side.

CONCLUSIONSThe method of 3D CT quantitative analysis can provide precise information in the diagnosis and treatment planning of facial asymmetry deformity.

Anatomic Landmarks ; diagnostic imaging ; Cephalometry ; Craniofacial Abnormalities ; diagnostic imaging ; Facial Asymmetry ; diagnostic imaging ; Humans ; Imaging, Three-Dimensional ; methods ; Tomography, X-Ray Computed ; methods

OBJECTIVEElucidate the medicinal licorice species circumscription in order to develop licorice resources in China and select new cultivars.

METHODPCR amplification, DNA sequencing and cladistic analysis.

RESULTAcquire the ITS sequences and phylogenetic tree of 8 licorice species.

CONCLUSIONAccording to results Glycyrrhiza eurycarpa and G. glabra var. glandulosa should be combined into G. and G. glabra respectively and G. egladulosa is an independent species.

Base Sequence ; DNA, Plant ; genetics ; DNA, Ribosomal Spacer ; genetics ; Glycyrrhiza ; classification ; genetics ; Glycyrrhiza uralensis ; genetics ; Molecular Sequence Data ; Pharmacognosy ; Phylogeny ; Plants, Medicinal ; classification ; genetics

OBJECTIVETo find out the licorice(Glycyrrhiza uralensis) distribution area, resource complexion and resource reserves of northeast China, to analyze the cause of the swing of the pendulum of resources, to put forward the countermeasure of resource protection and to provide evidence for the establishment of relative statutes.

METHODCombination of visit-inquisition and sample-square investigation involving the resource complexion of the 32 counties and cities in the northeast China wasmade.

RESULT AND CONCLUSIONThe east distribution boundary and the whole distribution current of licorice in the northeast China were determined the northeast licorice distributing region was compartmentalized into three typical sub-regions, and the licorice population character and artificial disturbing status in main counties of every sub-region were described. The licorice reserves were also figured out. At the same time, the nature and the artificial factors that influenced the swing of the pendulum of licorice resource were analyzed, and the correlative safeguard measure was brought forward.

China ; Conservation of Natural Resources ; Ecosystem ; Glycyrrhiza uralensis ; Pharmacognosy ; Plants, Medicinal

OBJECTIVETo retrospectively survey frostbite in patients living in plain regions, and to analyze the features of frostbite and the results after hospitalization.

METHODSFifty-nine patients with frostbite, aged from 15 to 85 years admitted in Beijing Jishuitan Hospital from 1992 to 2007, were enrolled in this study. Occupation, cause of the injury, initial visit time, position and degree of depth (assessed according to the standard of burn injury) of frostbite, and amputation rate of patients were recorded and analyzed.

RESULTSMost patients of the 59 cases were workers or unemployed, the main reasons of injury were prolonged contact with material in a low temperature, with impaired consciousness, and having an out-door activity. The average first visit time was 11 days after the exposure. Frostbite was superficial 2(nd) to deep 2(nd) degree in 12 patients, while 47 patients were found to have 3(rd) to 4(th) degree injury. Limbs, or fingers and toes were amputated from 40 patients. The differences between patients visited within 3 days after frostbite and patients visited later than 3 days in respect of degree of depth of frostbite and amputation rate were statistically significant (P < 0.05). There was no significant difference in amputation rates in different body parts of frostbite (P > 0.05).

CONCLUSIONSPatients in plain regions mainly suffer frostbite at the distal portions of the extremities. They should visit hospital early after injury so that the degree of frostbite can be alleviated and rate of amputation can be lowered.

Adolescent ; Adult ; Aged ; Aged, 80 and over ; Amputation ; Female ; Frostbite ; surgery ; therapy ; Humans ; Male ; Middle Aged ; Retrospective Studies ; Young Adult

OBJECTIVEThe purpose of this study was to explore suppositional sutural construction and protraction in the three-dimensional finite element model of craniofacial complex.

METHODSCombining spiral CT scanning technology with the three-dimensional finite element method, three-dimensional FEM model of craniofacial complex was developed for analysis. In the model, craniofacial sutures were constructed through the MSC. Patran program and different mechanical properties of sutures were applied. Under the same loading condition, bone displacements of the maxilla were calculated.

RESULTSA three-dimensional FE model of craniofacial complex, comprising teeth and craniofacial sutures, was developed. The displacement of the skeletal structures with sutures was significantly larger than that without sutures.

CONCLUSIONSThe construction of craniofacial sutures in the three-dimensional finite element model of craniofacial complex could improve the accuracy of finite element model, which set up good foundation for biomechanical studies of craniofacial complex.

Cephalometry ; methods ; Child ; Cranial Sutures ; anatomy & histology ; diagnostic imaging ; Female ; Finite Element Analysis ; Humans ; Imaging, Three-Dimensional ; Materials Testing ; Radiography