Objective: To investigate the chemical constituents of 80% ETOH extract from rhizome of Belamcanda chinensis (L.) DC. Methods: The constituents were isolated and purified by chromatography on silica gel, Sephadex LH-20 and HPLC; the structures of the compounds were determined by MS and NMR spectral analysis. Results: Ten constituents were identified from rhizome of Belamcanda chinensis (L.) DC, including tectoridin (I), acetovanillone (II), 4-hydroxy-acetophenone (III), β-sitosterol (IV), β-daucosterol (V), 5, 7, 4′-trihydroxyl-3′, 5′-dimethoxyflavone (VI), luteolin (VII), apigenin (VIII), 5,7,4′-trihydroxyflavanones (IX), and isorhamnetin (X). Conclusion: Compounds VI, VI, VIII, and IX have been isolated from rhizome of Belamcanda chinensis for the first time.

OBJECTIVETo investigate the clinical effects of enblock distal radius T-plate fixation in treating trailing edge fracture of tibial plateau medial condyle and posterior cruciate ligament (PCL) avulsion fracture.

METHODSFrom September 2008 to November 2011, 5 patients with trailing edge fracture of tibial plateau medial condyle and PCL avulsion fracture caused by knee joint hyperextension,were treated with surgery. There were 3 males and 2 females with an average age of 35 years old (25 to 42). Left knee injury was in 3 cases and right knee had in 2 cases; 2 cases caused by sports injury and 3 cases caused by road accident. All patients were undergone emergency treatment. Fractures were anatomically reduced and fixed with T-plate through poples approach. Complications were observed after operation. Bone healing and clinical effects were respectively evaluated by X-rays and HSS system.

RESULTSFive patients were followed up for 1 to 4 years with a mean of 2 years. All incisions obtained healing of I stage. All knee joints recovered well and were stable with inflexion more than 120 degrees, no complications such as knee joint pain, injuries of nerve and blood vessel, infection, internal fixation failure were found. The mean score of HSS system was 94.40 +/- 6.09 and all patients got excellent result.

CONCLUSIONFor the treatment of trailing edge fracture of tibial plateau medial condyle and PCL avulsion fracture caused by knee joint hyperextension, enblock distal radius T-plate fixation had advantages of good stability,higher success rate, and knee joint function can recover well.

Adult ; Female ; Follow-Up Studies ; Fracture Fixation, Internal ; Humans ; Male ; Posterior Cruciate Ligament ; diagnostic imaging ; injuries ; surgery ; Tibial Fractures ; diagnostic imaging ; surgery ; Tomography, X-Ray Computed ; Treatment Outcome

OBJECTIVETo observe the therapeutic effects of steel plate fixation after the failure of arthrodesis of ankle by screw fixation.

METHODSFrom August 2001 to October 2011, 15 patients were with steel plate fixation after failure of arthrodesis of ankle by screw fixation. Among patients, 9 cases were males and 6 cases were females,ranging age from 40 to 65 years old with the average of 56 years old. Ten cases were in left and 5 cases were in right. Screws were removed and steel plate was fixed intraoperatively, and plaster external fixation for postoperation. Clincal effect were evaluated according to AOFAS scoring system from pain, waliking ability and aligment before and after operation, and X-ray was used to evaluate joint fusion after operation.

RESULTSAll patients were followed up, and the duration ranged from 4 months to 4 years with an average of 2 years. The incison were healed in stage I. No ankle pain,injury of blood vessel and nerve,infection and farilure of internal fixation occuerred. The AOFAS score increased from 36.86 +/- 8.32 preoperatively to 85.09 +/- 4.65 (t = -26.366, P = 0.000).

CONCLUSIONSteel plate fixation after the failure of ankle arthrodesis of screw fixation has the advantages of rigid stability, simple manipulation and high success rate, less pain, perfect recovery.

Adult ; Aged ; Ankle Joint ; diagnostic imaging ; surgery ; Arthrodesis ; Bone Plates ; Bone Screws ; Female ; Follow-Up Studies ; Fracture Fixation, Internal ; instrumentation ; Humans ; Male ; Middle Aged ; Steel ; Tomography, X-Ray Computed ; Treatment Failure

Air ; analysis ; Chromatography ; methods ; Iodine ; analysis ; Workplace

Accidents, Occupational ; Bromine ; poisoning ; Humans ; Hydrobromic Acid ; poisoning

Abstract: Objective To analyze the risk factors for neonatal preterm birth in 12 hospitals in Yunnan Province from 2016 to 2017, and to establish a nomogram prediction model for neonatal preterm birth, providing scientific evidence for the prevention of preterm birth. Methods A total of 20 445 pregnant women who gave birth in 12 hospitals in Yunnan Province from 2016 to 2017 were collected and grouped into a preterm group (n=1 186) and a full-term group (n=19 259) according to whether they had a premature delivery. The general information questionnaire of pregnant women designed by the research team was applied to understand the basic conditions and pregnancy information of the two groups, and the risk factors of preterm birth were determined by logistic regression analysis, R software was applied to draw a nomogram prediction model of neonatal preterm birth, and its predictive performance was tested. Results There were significant differences in the proportions of twins and above (9.11% vs 7.10%), pregnancy-induced hypertension (21.67% vs 18.57%), gestational diabetes mellitus (18.21% vs 15.90%), anemia (24.28% vs 20.70%), premature rupture of membranes (11.64% vs 9.76%), and abnormal placenta (7.08% vs 5.51%) between the preterm group and the full-term group (χ2=6.731, 7.055, 4.441, 8.691, 4.437, 5.232, all P<0.05); the logistic regression analysis showed that the risk factors for neonatal preterm birth were twins and above (OR=2.378), pregnancy-induced hypertension (OR=2.039), gestational diabetes mellitus (OR=1.824), anemia (OR=1.825), and premature rupture of membranes (OR=2.313) (all P<0.05); the discrimination (area under the curve was 0.794, 95%CI=0.738-0.850) and precision (goodness of fit HL test, χ2=8.864, P=0.312) of the nomogram model constructed to predict the occurrence of neonatal preterm birth were both good. Conclusions The nomogram model for preterm birth constructed based on 5 factors including number of fetuses, pregnancy-induced hypertension, gestational diabetes mellitus, anemia and premature rupture of membranes can predict the occurrence of neonatal preterm birth well, thus providing reference for the prevention of neonatal preterm birth.

OBJECTIVETo elucidate the natural occurrence of masked deoxynivalenol (DON-3-G) and other multi-mycotoxins in cereals from parts of China.

METHODSA total of 446 corn and wheat samples harvested in 2007 and 2008 collected from Henan, Hebei, Guangxi, Anhui, Sichuan, Chongqing and Jiangsu provinces were analyzed for DON-3-G and other multi-mycotoxins (including deoxynivalenol (DON), zearalenone (ZEN), nivalenol (NIV), et al) by UPLC-MS/MS.

RESULTSCorn and wheat samples were mainly contaminated by DON and its derivatives as well as ZEN.88% (169/192) of wheat samples were positive for DON (range: 1.5 - 590.7 µg/kg; median: 30.8 µg/kg); 22.9% (44/192) of wheat samples were contaminated with ZEN (range: 1.7 - 3425.0 µg/kg; median: 8.0 µg/kg) and six samples contained ZEN concentration higher than the ZEN tolerance limit of 60 µg/kg. DON was detected in 50.5% (103/204) corn samples (range: 1.6 - 4374.4 µg/kg; median: 94.9 µg/kg); Seven samples contained DON exceeding the tolerance limit of 1000 µg/kg for DON. Additionally, ZEN was found in 41.7% (85/204) corn samples with the concentration between 1.6 µg/kg and 4808.7 µg/kg (median: 48.5 µg/kg) and there were 37 corn samples with ZEN level in the excess of tolerance limit for ZEN (60 µg/kg). DON-3-G was detected in corn and wheat samples for the first time in China with the median level of 21.4 µg/kg and 34.6 µg/kg for wheat and corn, respectively. Wheat was more heavily contaminated with DON-3-G than both 3-acetyl-DON (3-A-DON, median: 4.1 µg/kg) and 15-acetyl-DON (15-A-DON, median: 3.1 µg/kg) (t values were 5.111 and 5.966, respectively, both P values < 0.01). While, the level of 15-A-DON (median: 48.6 µg/kg) in corn was higher than 3-A-DON (median: 6.8 µg/kg) (t = -3.579, P < 0.01). The concentration of DON, DON-3-G, 3-A-DON, 15-A-DON and ZEN in corn were higher than that in wheat (Z values were -3.492, -1.960, -2.467, -8.711 and -6.272, respectively, all P values < 0.05). Wheat (median: 29.0 µg/kg) contained higher NIV in comparison with corn (median: 18.2 µg/kg, Z = -2.086, P < 0.05).

CONCLUSIONWheat and corn samples from parts of China were contaminated with multi-mycotoxins and DON was the predominant;in comparison of wheat, corn was more heavily contaminated with DON, DON-3-G, 3-A-DON, 15-A-DON and ZEN.

China ; Edible Grain ; chemistry ; microbiology ; Food Contamination ; Food Microbiology ; Fusarium ; isolation & purification ; Mycotoxins ; isolation & purification ; Trichothecenes ; isolation & purification ; Triticum ; chemistry ; microbiology ; Zea mays ; chemistry ; microbiology

OBJECTIVETo analyze the influence of included angle between the anterior aspects of S2 and S vertebral bodies on pelvic inlet imaging in the pelvic midline sagittal plane.

METHODSTotally 58 axial pelvic CT scans were chosen as study objects including 43 males and 15 females,with an average age of 40.7 years old (ranged,18 to 68 years old). The angles between the anterior aspects of S2 and S1, vertebral bodies and the horizontal plane on midline sagittal CT reconstruction were measured to simulate the optimal S2 and S1 inlet angles. The included angle between the anterior aspects of S2 and S1 vertebral bodies was calculated by subtrocting the S1,inlet angle from the S2 inlet angle defined as a base number. Then, the impact of the calculated included angles on the pelvic inlet imaging was analyzed. Results:The S2 inlet angles averaged (30.5±6.5) degrees; the S inlet angles averaged (25.7±5.9) degrees. The difference between them was significant (t=3.35, P=0.001). Ten patients had zero angle between the anterior aspects of S2 and S1 vertebral bodies; 14 patients had negative angle, averaged-(8.9±8.1) degrees; 34 patients had positive angle,averaged (11.8+6.4) degrees.

CONCLUSIONThe difference of included angle between the anterior aspects of S2 and S1 vertebral bodies leads to the difference between S1 inlet view and S2 inlet view in most cases, complicating the pelvic inlet imaging,and affecting the reliability of the application of pelvic inlet view. Utilizing the angles measured on the preoperative midlihe sagittal CT reconstruction to obatin the patient-customized S1 and S2 inlet views could accurately guide the S1 and S2 iliosacral screw insertion.

Adolescent ; Adult ; Aged ; Animals ; Bone Screws ; Female ; Fracture Fixation, Internal ; methods ; Humans ; Image Processing, Computer-Assisted ; Male ; Middle Aged ; Pelvis ; anatomy & histology ; injuries ; Spine ; anatomy & histology ; Tomography, X-Ray Computed ; Young Adult

OBJECTIVESTo introduce a classification system of upper sacral segment and its significance based on the continuous pelvic axial computed tomography scan.

METHODSThe whole pelvis 2.0 mm thick axial scan images of 127 cases were observed, the sacroiliac screw channel of S1 were measured, according to the size of the transverse screw channel the upper sacral segment were classified. Such as transverse screw channel existed and in at least 4 layer scan images its width was > 7.3 mm, it was defined as sacral segment of the normal type. Such as transverse screw channel existed and its maximum width was 7.3 mm or less on scanning level, it was defined as a transitional. Such as transverse channel did not exist, or its width on all scanning level was 0 mm or less, it was defined as dysplastic. Various cases,percentage, and the average of the transverse screw channel were calculated.

RESULTSThere were 58 normal (45.7%),42 transitional (33.1%), and 27 dysplastic (21.2%) upper sacral segments with an averaged width of the tansverse screw channel of 13.9 mm, 5.2 mm, and 0.9 mm, respectively. Each specimen could be defined as one of the three types of upper sacral segment without exceptions.

CONCLUSIONIt is possible to insert a transverse iliosacral screw into a normal upper sacral segment when indicated because of the capacious transverse screw channel. The transverse iliosacral screw placement into the transitional and dysplastic upper sacral segments was contraindicated because of the limited or none transverse screw channel. The transitional upper sacral segment was superior to the dysplastic segment due to its starting point location restriction on the true lateral sacral view.

Adolescent ; Adult ; Aged ; Aged, 80 and over ; Bone Density ; Bone Screws ; Female ; Fracture Fixation, Internal ; Humans ; Male ; Middle Aged ; Pelvic Bones ; diagnostic imaging ; surgery ; Sacrum ; diagnostic imaging ; surgery ; Tomography, X-Ray Computed ; Young Adult

Objective To develop a candidate reference method for the measurement of progesterone in human serum.Methods The serum sample is mixed with the internal standard [3,4-~(13)C_2] progesterone.After extraction with n-hexane and purified by a aqueous solution of 2-Hydroxypropyl-?- cyclodextrin (HP-?-CD),the serum progesterone and labeled progesterone are converted to the 3-enol heptafluorobutyrate and analyzed by gas chromatography mass spectrometry (GC/MS) with selected ion monitoring.The concentration of serum progesterone is calculated by bracketing method.Results The results gave coefficients of variation (CVs) of 0.69% to 2.12%.The analytical recoveries ranged from 98.3% to 100.1%.The results of measuring certified reference materials of serum progesterone are agree with the target value.Conclusion The procedure for measuring progesterone in serum is a highly accurate and precise method and may be used as a candidate reference method for serum progesterone assays.