Objective To investigate the correlation of clinical stage and treatment plan with prognosis in incidental prostatic carcinoma.Methods From 2004 to 2010,a total of 1076 patients diagnosed as BPH underwent transurethral plasma kinetic enucleation of prostate (TUPKEP) in our hospital,and their clinical data were respectively analyzed.Among them,42 cases were found to have incidental prostatic carcinoma.The correlation of clinical stage and treatment plan with prognosis in incidental prostatic carcinoma were observed.Results Among 1076 BPH patients undergoing TUPKEP operation,42 cases (3.9％) aged 56-88 years were found to have incidental prostatic carcinoma,which all displayed as prostatic adenocarcinoma including 18 cases at T1 a stage and 24 cases at T1b stage.10 cases received endocrinal therapy,14 cases received bilateral orchiectomy,14 cases underwent radical prostectomy and 4 cases were treated with watchful waiting.Patients were followed up for 24 to 96 months.The survival rates were 100.0％ and the rates of progression were 0.0％,20.0％,0.0％ in T1 a patients received watchful waiting,androgen-deprivation therapy and radical prostectomy,respectively.Total survival rate was 100.0％ and total rate of progression was 11.1％ in T1a patients.The survival rates were 71.4％,100.0％ and the rates of progression were 42.9％,0.0％ in T1 b patients received androgen-deprivation therapy and radical prostectomy,respectively.Total survival rate was 83.3 ％ and total rate of progression was 25.0 ％ in T1 b patients.Compared with T1 b patients,the total survival rate was higher (x2=18.19,P＜0.01) and the rate of progression was lower in T1 a patients (x2 =6.52,P＜0.05).Conclusions The survival rate in T1 a patients accepted androgen-deprivation therapy is similar to that in T1 a patients with watchful waiting.Compared with T1a patients,the survival rate is lower but the rate of progression is higher in T1 b patients received active androgen-deprivation therapy.The survival rate is higher in T1 b patients treated with radical prostectomy than in those received other treatments.Watchful waiting is acceptable for T1 a patients.T1 b patients should be treated with radical prostectomy for a better effect.

Humans ; Minimally Invasive Surgical Procedures ; Neurosurgery ; methods

Objective To investigate the effects of different dose of tranexamic acid in fibrinolysis during liver transplantation. Methods Sixty ASA Ⅱ~ Ⅳ liver transplant recipients, were randomly, double-blind assigned to one of 3 groups (n = 20): group control (group C), group tranexamic acid 1 (group T1) and group tranexamic acid 2 (group T2). The patients in group C received a loading dose of normal saline 10 mL, then continued infuse normal saline at 20 mL/h until neohepatic phase 120 min, while in other two groups, patients received a loading dose of tranexamic acid 1 g, totally 10 mL, followed by continuous infusion at 10 mg/(kg·h) in group T1 or 20 mg/(kg·h) in group T2 until neohepatic phase 120 min. Prothrombin time, fibrinogen, fibrin degradation product and D-dimers were measured before operation (T0), 120 min after the skin incision (T1), nonhepatic phase 30 min (T2), neohepatic phase 120 min (T3). Blood loss, fresh frozen plasma dosage, fibrinogen dosage and thromboembolic events were recorded. Results The plasma concentration of fibrin degradation product and plasma concentration of D-dimers were different in the 3 groups, group T2< group T1 0.05). Conclusions Continuous infusion of tranexamic acid can inhibit fibrinolysis during liver transplantation. No adverse event of thrombosis was detected. Larger dose of tranexamic acid can reduce blood loss and fresh frozen plasma transfusion.

China ; Dust ; analysis ; Female ; Humans ; Male ; Manufactured Materials ; Occupational Exposure ; prevention & control ; statistics & numerical data ; Occupational Health

Purpose:To investigate the expression of tumor suppressor genes P16 and P15 in human primary gastric carcinoma(PGC) and metastatic lymph node(MLN) in order to explore their roles in carcinoma metastasis and the prognosis of PGC.Methods:The expresion of P16 and P15 was detected by SP immunohistochemical method in 92 cases of PGC and 138 MLN. All samples were obtained fresh, fixed with 10% buffered formalin immediately, embedded with paraffin and then sectioned serially. Results:The positive expression rates of P16 and P15 were 17.45% and 28.3% in PGC, and 15.95% and 28.3% in MLN respectively. The positive expression rates of P16 and P15 in PGC with lymph node metastasis was lower than that without lymph node metastasis ( P

Objective:To explore the clinical application value of 3D printing technology in percutaneous nephrolithotomy(PCNL) to complex renal calculi.Methods:The clinical data of 41 patients with complex renal calculi from May 2018 to October 2019, in the First Affiliated Hospital of Xiamen University and Xiang'an District of the First Affiliated Hospital of Xiamen University were retrospectively analyzed. There were 19 cases underwent PCNL after 3D printing (3D printing group), and 22 cases during the same period did not undergo 3D printing before operation (control group). Before operation, the two groups underwent CT plain scan enhanced examination. In 3D printing group, 3D printing technology was used to obtain 3D renal models, then 3D renal models were used for preoperative design and simulation of surgical puncture and preoperative conversation.The control group only underwent PCNL after routine examination.The ages of the patients in 3D printing group and control group were (42.9±2.5) vs. (41.3±2.9) years old, male/female ratio 11/8 vs. 12/10, body mass index (22.4±1.1) vs. (23.2±1.4) kg/m 2, serum creatinine (42.9±2.5) vs. (78.2±4.5) μmol/L, stone size (5.0±1.2) vs. (5.2±1.3) cm, the CT values of the stones was (930±210) vs.(950±200) HU. The difference of above parameters was not statistically significant ( P>0.05). The following indexes were compared between the two groups: score of questionnaire on satisfaction of preoperative conversation, and datas about operation and postopetation. Results:All the operations were successfully completed. The time of locating the target calyces in 3D printing group and control group was (3.3±1.3) vs. (5.3±3.1) min, and the coincidence of puncture calices was 94.7% (18/19) vs. 54.5%(12/22), and the stone removal rate of the 3D printing group was 78.9% (17/19) vs. 36.4% (8/22), 3D printing group was better than the control group in these respects( P < 0.05). However, there were no significant differences in postoperative complications [21.0% (4/19) vs. 13.6% (3/22)], multi-channel[89.4% (17/19) vs. 86.4% (19/22)], operation time [(121.8±20.2) vs. (132.1±18.5) min], time of hospitalization [(7.6±1.3) vs. (8.0±1.8)d] and time of extubation for renal fistula [(3.8±1.7)vs. (4.5±2.0 )d] (all P > 0.05). During preoperative conversation between the 3D printing group and the control group , the time spent on signing the consent [(17.0±3.9) vs.(21.0±3.3) min], the degree of understanding of the stone condition [(2.5±0.6)vs.(2.0±1.2) points], the degree of understanding of the PCNL surgical process and complications [(2.6±0.6) vs.(1.8±1.3) points] and the degree of satisfaction with the doctor’s preoperative conversation effects [(2.4±0.9) vs.(1.7±1.6) points]were significantly different in comparisons ( P<0.05). Conclusions:3D printing technology can be used in PCNL to directly display the internal anatomical relationship of renal calculi, guide accurate preoperative designing, help improve the operation efficiency and stone clearance rate, and can also be used as a mold in preoperative conversation to improve communication efficiency.

The scientific papers in "Chinese Journal of Medical Instrumentation" from 1997 to 2001 have been analysed by bibliometrics, including the characteristics of the periodical, its author's areas, units distribution and quotations. Some suggestions have been put forward to promote the biomedical engineering research.
Bibliometrics ; China ; Equipment and Supplies ; Humans ; Multivariate Analysis ; Periodicals as Topic ; statistics & numerical data

Objective To verify the daily delivery accuracy of volumetric-modulated arc therapy (VMAT) and achieve the process quality control (PQC) of linac using statistical process control (SPC)technology.Methods The log files of all treatments were taken out from the linac system.An in-house software which created by Matlab 7.14 was used to analyze the daily parameters accuracy and the mechanism and dose delivery accuracy of the linac for each VMAT,and an daily evaluation report was automatically created for the linac.The stability of the linac and the deviation of the delivery accuracy for various cancer sites were also analyzed.To achieve the process quality control of hnac using SPC technology,the control limit of each parameter was calculated by Johnson alternation and the single value control charts were drawn.Results 76 patients mainly with nasopharyngeal carcinoma,cervical carcinoma,rectal cancer and laryngeal cancer,got the treatment daily with VMAT technology,and a total of 2 446 arcs were delivered by the linac in continuous 16 days.The gantry angle error,y and x collimator position error,MLC leaf position error and dose delivery error were 0.49°,0.09 mm,0.38 mm,0.31 mm,0.05 MU,respectively.Compare to the nasopharynx,uteri,rectal and larynx cancer,it can be seen that the variation factors of dose delivery and gantry angle errors for various cancer sites were higher,which was 8.10％ and 4.54％,respectively.Through the process quality control of the linac,it was found that all the parameters were in control.While some abnormal points arose (the error was greater than UCL),and the ratio of the gantry angle which was out of control (0.45％) was the highest in all parameters.Conclusions linac delivery accuracy could be monitored and verified during the whole VMAT treatment for each patient,and the daily running condition of linac could be monitored.Through the introduction of SPC technology and the control charts,the process quality control of linac in VMAT could be achieved.It is a financial and valid method for the daily quality assurance of linac.

UNLABELLEDTo evaluate the effects of preadjusted bracket base shape, the morphology of tooth surface where bracket locates, and the suitability relevant to location of bracket on the preadjusted edgewise appliance technique. 1 vertical curve and 3 horizontal curves of the clinical crown surface of anterior teeth and bicuspid teeth were measured with the precise contour instrument on the 60 plaster models of the subjects who have normal occlusion in Sichuan province. It was found that variation of identical curve exists at the different heights between the teeth and between the individuals; the surface of the central zone of tooth-crown gradually protrudes from incisors to bicuspid teeth in the vertical direction, and the mesial contour of cuspid is more prominent than the distal in the horizontal direction.

CONCLUSIONThe 4 mm X 3 mm contour of the vestibular central zone of identical tooth-crown in different individuals is fairly stable; it is suitable for the location of preadjusted brackets. The vertical shifts of brackets could change the preadjusted torque value and the design of cuspid bracket should have the distinction between mesial and distal shape.

PARP [poly(ADP-ribose)polymerase] represents a novel potential target in cancer therapy. It is involved in a DNA repair process by catalyzing the transfer of ADP-ribose units from NAD to a number of its substrate proteins. In this work, a series of novel azaindole derivatives was designed and synthesized. Moreover, 16 target molecules were screened and 8 compounds displayed inhibitory activity against PARP-1. It has been demonstrated that these azaindoles bearing cycloamine substituents at 2-position were active to both PARP-1 and PARP-2.
Antineoplastic Agents ; chemical synthesis ; chemistry ; pharmacology ; Aza Compounds ; chemical synthesis ; chemistry ; pharmacology ; Indoles ; chemical synthesis ; chemistry ; pharmacology ; Poly (ADP-Ribose) Polymerase-1 ; Poly(ADP-ribose) Polymerases ; metabolism