ObjectiveTo evaluate the probability of the fetal heart scanning in first trimester(11 -14+6 week) by transabdominal ultrasonography.MethodsBy using advanced ultrasound machine with high resolution transabdominal probe,249 fetal hearts were scanned.Four chamber view,left and right outflow view,three vessels view were obtained.The successful observation rates of these views under different gestational age were recorded.For 18 pregnant women with suboptimal transabdominal scanning condition,transvaginal scan were supplemented.ResultsAmong 249 singleton fetuses with low risk of congenital heart disease,four chamber view was successfully visualized in 227 (91.2％),left outflow view in 125(50.2％),right outflow view in 102(40.9％),three vessels view in 98(39.4％).The successful observation rate of these four views increased with gestational ages.The successful observation rate of each view in successive gestational age showed remarkable difference (P ＜ 0.05).The four chamber view had the highest successful observation rate with 95％ after 12 weeks.After 13 weeks,left and right outflow views visualizing rate was above 85％.Transvaginal scanning can increase the four chamber view successful observation rate.For observation of other views,transvaginal scanning,however,showed no superior than transabdomial scanning.ConclusionsHigh resolution transabdominal probe can be used to perform the fetal hearts scanning in early trimester.It will benefit to find the fetal heart malformation.

ObjectiveTo develop a new formula to estimate macrosomia weight and compared with published 25 formulas.Methods1153 fetuses including 239 macrosomia within one week of delivery were considered.Two-dimensional ultrasound measurements of the fetal biparietal diameter (BPD),head circumference (HC),abdominal circumference (AC) and femur length (FL) were performed and recorded by experienced sonographers.The birth weight were measured after the babies born.The formula finding group,1034 fetuses including 914 fetuses weighting less than 4000g and 120 macrosomia,were utilized to generate an overall regression formula by stepwise linear regression.120 macrosomia were used to established the formula for estimating macrosomic weight.As the training group,other 119 macrosomia were used to test the new formula and compared with other 25 existing formulas.ResultsThe new formula for whole weight was:lgBW =0.180 (HC) + 0.00628 (AC) - 0.00318 (HC)2 + 0.00173 (AC) (FL) +0.0000430(BPD)(HC)2.The new formula for macromia was:lgBW =0.730(BPD) -0.0375 (BPD)2 +0.000264(AC) (FL).The new method gave ( - 87.89 ± 230.95)g of estimation error and (4.4 ± 3.9) ％ of absolute percentage error,while the best existing formula provided (115.61± 345.09)g and (6.8 ± 5.4)％.With the new method,89.1％ of estimates fell within ± 10％ of the actual birth weight,while the best existing formula gave 75.6％.ConclusionsThe new formula was based on typical Chinese Han women,the error was lower and more suitable than those developed formulas for Chinese populations,especially for macrosomia fetuses.

OBJECTIVETo investigate the association of A260G and A386G polymorphisms of the DAZL gene with male infertility caused by oligozoospermia or azoospermia.

METHODSWe searched the PubMed, Science Direct, Wiley Online Library, CNKI, VIP, and CDDB databases up to November 30, 2013 for case-control studies evaluating the relationship of SNP260 and SNP386 polymorphisms of the DAZL gene with male infertility, and meanwhile conducted manual sourcing of the references in the identified studies and relevant articles. Two reviewers independently screened the title, abstract and keywords of each article retrieved. The StataSE12. 0 software was used for meta-analysis and other statistical analyses.

RESULTSTotally, 13 case-control studies were included (10 about A260G and 11 about A386G), involving 2 715 infertile patients (2 500 with oligozoospermia or azoospermia) and 1 835 normozoospermic men. DAZL A260G showed no statistical significance in the allele, dominant, recessive, co-dominant, or super-dominant gene model (P >0. 05). DAZL A386G exhibited a strong correlation with oligozoospermia or azoospermia in Asians in the allele gene model (OR = 0. 15, 95% CI 0.07 -0.34, P <0.05), dominant gene model (OR =0. 16, 95% CI 0.07 - 0. 35, P <0.05), co-dominant gene model (AA/AG) (OR = 0. 15, 95% CI 0. 06 - 0. 33, P < 0. 05), and super-dominant gene model (OR = 0. 15 (95% CI 0.06 - 0.33, P <0.05) , and so did it in Chinese in the four gene models ( OR = 0. 11, 95% CI 0.04 - 0. 28, P <0.05; OR =0. 11, 95% CI 0.04 - 0.28, P<0.05; OR = 0.09, 95% CI 0.03 - 0.26, P<0.05; OR = 0.09, 95% CI 0.03 - 0.26, P< 0.05).

CONCLUSIONOur study manifested that the DAZL polymorphism A386G, but not A260G, was correlated with reduced sper- matogenesis or sperm count specifically in Chinese males. More high-quality trials are required for a deeper insight into the exact relationship of DAZL A260G and A386G polymorphisms with oligozoospermia- or azoospermia-induced male infertility.

Alleles ; Asian Continental Ancestry Group ; Azoospermia ; genetics ; Case-Control Studies ; Humans ; Infertility, Male ; genetics ; Male ; Oligospermia ; genetics ; Polymorphism, Genetic ; RNA-Binding Proteins ; genetics ; Spermatozoa

Berberine Alkaloids ; therapeutic use ; Humans ; Phytotherapy ; Tachycardia ; drug therapy

China ; Coronary Artery Bypass ; methods ; Coronary Artery Disease ; surgery ; Humans

Coronary Disease ; complications ; Erdheim-Chester Disease ; complications ; Humans ; Male ; Middle Aged

Adrenal Gland Neoplasms ; Adult ; Humans ; Male ; Pheochromocytoma ; Rupture, Spontaneous

BACKGROUND: Bone marrow mesenchymal stem cell (MSC) is a kind of stem cell with potential of self-repair and multi-differentiation. It may differentiate into neuron, adipose cell and osteoblasts.OBJECTIVE: To observe the transforming efficacy of human bone marrow mesencymal stem cells (hMSCs) into neurons in vitro in different generations so as to provide reliable experimental data for the clinical application of MSCs.DESIGN: Single sample was designed.SETTING: Department of Neurology, Sino-Japan Friendship Hospital,Jilin UniversityPARTICIPANTS: Marrow tissue was collected from 9 cases of spinal fusion in Department of Orthopedics of First Hospital affiliated to Jilin University. Of 9 cases, all of them were in known of the experiment.METHODS: The experiment was performed in Sino-Japan Hospital affiliated to Jilin University from September 2002 to February 2003. The primary and generative culture of hMSCs was given. Experimental and the control groups were divided.-mercaptoethanol was taken as inducer. hMSCs of the 2rd, 4th, 6th and 8th generations were selected for induction in vitro for 6 h. Cytochemistry staining and immunohistochemistry staining were used to assay the expressions of neuronal and astrocytic marked proteins.MAIN OUTCOME MEASURES: ① Growth curve analysis on genera tive culture of hMSCs. ② Nissel staining. ③ Immunohistochemical staining.RESULTS: ① Common characters of generative culture: The latent phase of generative culture was 12-24 hours, exponential phase was 7-10 days and 11-13 days later, cell culture entered the platform phase. ② After induction of the 2nd, 4th and 6th generated hMSCs, deep blue granular Nissl body presented in cytoplasm. In 6 hours on the 8th induction, there was no obvious deep blue Nissl structure presented in cytoplasm.③ Except GFAP, NSE and NF-M were expressed in hMSCs of different generations after induction for 6 hours. There was no significant difference in positive rates of the 2nd, 4th and 6th generations (P ＞ 0.05), but the significant difference presented in comparison between the 8th generation and the 2nd, 4thand 6th generations (P ＜ 0.05). CONCLUSION:-mercaptoethanol can induce hMSCs differentiating into neuronal cells in vitro. The positive rates of the 2nd, 4th and 6th generationsare higher remarkably than the 8th generation.

Objective To observe the expression of caspase-3 on the trehalose as cryoprotectant for preserving aortic valve homograft in liquid nitrogen.Methods The aortic valve homograft was divided into 5groups,namely:0.1 mol/L DMSO(control group),0.1 mol/L trehalose(experimental group 1),0.1 mol/L trehalose+0.1 mol/L DMSO(experimental group 2),0.2 mol/L trehalose+0.1 mol/L DMSO(experimental group 3),0.3 mol/L trehalose+0.1 mol/L DMSO(experimental group4).At the time of 12 months,15 months and 18 months when preserved in liquid nitrogen,relative expression of caspase-3 of the aortic valve homograft was measured by RT-PCR and Western Blot.Fresh group was a negative control group.Results At the same time(P<0.05),the expression of caspase-3 of fresh aortic tissue was slightest.The experimental group 2 was in accord with the experiment group 3,which was of a sort compare with the fresh group.The experimental group 4,which was worse than the experimental group 2 and 3,ranked above the experimental group 1.The worst was the control group.Conclusions The joint use of trehalose and DMSO could well inhibit the expression of caspase-3.Moreover.0.1mol/L trehalose+0.1 mol/L DMSO and 0.2 mol/L trehalose +0.1 mol/L DMSO could maximize the inhibition of the expression of caspase-3.

Objective To explore the effects of angled abutments on the anterior maxilla implant restoration. Methods We analyzed the biomechanical properties of implants of different sizes (Φ3.5 mm,4.0 mm and 4.5 mm in diameter;L11.5 mm and L13 mm in length)after connecting different angled abutments (0°,10°,20°,and 30°) using finite element method.Results The stresses and strains of loading parts of restorations increased and their distribution became more concentrated as the angle of abutment increased.Cortical bone of Φ3 .5 implants with smaller angle (10°or less)andΦ4.0 implants with abutments had the risk of overpassing the bone elastic threshold when the angle approached 30°.However,the cortical bone elastic deformation was within a safe range at all angles inΦ4.5 group.Conclusion We should consider the diameter of the implant when selecting angled abutments.The angled abutments are not suitable for small diameter implants.The bite force should be under control when needed. The larger angled abutments can be applied in the standard and major diameter implants and it is necessary to avoid occlusal overloading.