No abstract available.
Failure to Thrive*

No abstract available.
Epinephrine* ; Facial Nerve* ; Paralysis* ; Rabbits*

This study measured the relative displacements of the five-unit fixed partial dentures as cast with the same fixed partial dentures sectioned and assembled by investment-soldering, soldering stand-soldering, and cast-joining techniques. A total of fifteen specimens using a type IV gold alloy wee one-piece cast as control and then sectioned and assembled five test specimens for each method were prepared. A computerized three dimensional coordinate measuring machine and specially designed cylinder for this study were used. Displacement was defined by six displacement variables for the each of cylinders incorporated in each casting: three component displacements ( Lx, Ly, and Lz) and rotational displacements( thetax, thetay, thetaz). The global displacement was computed using the mathematical formula R= Global displacement ={{{{rm SQRT { (x'-x)^2 +(y'-y)^2 + (z'-z)^2} }} }} Under the conditions of this study, the following conclusions were drawn: 1. The investment-soldering group showed the largest mean value of final global displacements, followed by stand-soldering group, cast-joining group and one-piece cast group. However, between the mean values of final global displacement for the cast-joining group and one-piece cast group, there was no significant difference. 2. For investment-soldering and stand-soldering groups, the greater global displacements were recorded in soldering phase than in indexing or investing phase. 3. For one-piece cast group, the displacements occured mostly in the casting phase. And for castjoining group, there was no significant difference in global displacements among the fabrication procedures. 4. Intercentroidal distance decreased in framework-pattering, solder-indexing, solder-standing, and soldering phases, but increased in investment block-investing and casting phases. 5. Specially designed cylinder for touch-trigger type coordinate measuring machine was validated.
Abstracting and Indexing as Topic ; Alloys ; Denture, Partial, Fixed ; Investments ; Methods

No abstract available.
Classification* ; Dermatoglyphics* ; Yersinia*

During 1964 to 1967, a survey of 30,534 persons for filariasis was made on all over the country with the following results: Among 24,816 draftees from all over the country in the army recruitment camp 155(0.63 %) were found infected with Brugia malayi. Cheju Do showed the highest microfilaria rate(3.5 %), North Kyongsang Do(1.4 %) the next and South Cholla Do(1.2 %) the third. Blood films from 2,308 inhabitants were examined and 407(17.6 %) showed microfilaria in Cheju Do. 30(3.1 %) out of 974 inhabitants in North Kyongsang Do were found to be infected. The microfilaria rates were 2.0 per cent for 400 inhabitants of Chindo island in South Cholla Do. However, no positive case of microfilaria was found in the inhabitants of Kokumdo among 1,820 persons examined in South Cholla Do and of Namhae island(among 165 persons examined) in South Kyongsang Do. The mean microfilarial density per 20 cu. mm of blood was 52.6 in the inhabitants of Cheju Do, 12.2 in North Kyongsang Do and 27.3 in Chindo island(South Cholla Do). Any distinct relationship between the incidence of positive cases of microfilariae and age or sex of the cases was not observed in Cheju Do. However, in Norh Kyongsang Do and South Cholla Do the microfilaria rate of the male group is higher than the one of the female group of the inhabitants. From the above survey results it turned out that filariasis was found throughout Southern Korea except Kyonggi Do and South Kyongsang Do. A total 30,534 persons examined, 601(2.0 %) were found to be infected by Brugia malayi. Therefore, it seems that there are some endemic foci of malayian filariasis in three main areas such as North Kyongsang Do, South Cholla Do and Cheju Do.
parsitology-helminth-nematoda-Brugia malayi ; filariasis ; epidemiology ; Army

No abstract available.
Head* ; Neck* ; Neurilemmoma*

The purpose of this study was to investigate the effects of investing conditions on the marginal discrepancy of conical telescope outer crown with Co-Cr-Ti alloy(Dentitan) and to compare the marginal discrepancy and the retention force of outer crowns using different pattern materials (plastic foil, casting wax, pattern resin). To evaluate the effects of investing conditions on the marginal discrepancy, patterns with plastic foil were invested under three different liquid/powder ratio conditions using phosphate bonded investment (Univest-nonprecious): standard, 10% decreased and 10% increased. At each liquid/powder ratio condition, metal ring was lined with single or double layers of ceramic ring liner. The marginal discrepancy of outer crown at different investing conditions was measured by x 100 compact measuring microscope(STM5, Olympus, Japan). For measurement of the marginal discrepancy and the retention force of outer crown using different pattern materials, the investing condition of 10% decreased liquid/powder ratio and double layers of ring liner was selected because this investing condition resulted in the best fit of outer crown. Marginal discrepancy was measured in the same way above and retention force on universal testing machine. Under the conditions of this study, the following conclusions were drawn: 1. The thickness of ring liner had more influence on the marginal discrepancy of outer crown than the liquid/powder ratio, and the acceptable marginal fitness could not be expected at the investing condition directed by investment manufacturer. 2. There were no differences in the marginal discrepancy of outer crown among three different pattern materials 00.05). 3. Casting wax showed the greatest retention force(1640g) of outer crown, followed by pattern resin(1110g), plastic foil(820g). However, there was no significant difference between plastic foil and pattern resin(p>0.05). 4. Plastic foil showed the least variation in marginal discrepancy and retention force.
Alloys* ; Ceramics ; Crowns* ; Investments ; Plastics ; Telescopes*

Our purpose is to describe a successful twin pregnancy and delivery after intracytoplasmic sperm injection (ICSI) followed by calcium ionophore with spermatozoa from a globozoospermic man. On the second attempt of ICSI, all of eight metaphase II oocytes were fertilized with treatment with calcium ionophore. Day 3 transfer of six normally developing embryos resulted in an ongoing twin pregnancy, and two preterm healthy babies were born in the 33th week of gestation. To the best of our knowledge, this is the first report of pregnancy and delivery after ICSI followed by calcium ionophore with spermatozoa from a globozoospermic man in Korea.
Calcium* ; Embryonic Structures ; Humans ; Metaphase ; Oocytes ; Pregnancy ; Pregnancy, Twin* ; Sperm Injections, Intracytoplasmic* ; Spermatozoa*

The purpose of this study was to investigate the displacements of cast framework by torch soldering and electric soldering techniques. Specimen had two cylinders and connecting bar that had sectioned with 0.3mm gap at mid point. 10 of total specimens were divided into two groups. In torch soldered group, soldering investment block was made and conventional torch soldering procedure was carried out. In electric soldered group, electric soldering was carried out on the master cast without soldering investment block by using electric soldering machine(Dentapunkt DP 7, Kulzer, Germany). After soldering procedure, three dimensional coordinates of two centroids of each cylinder were measured by three dimensional coordinate measuring machine. The intercentroidal displacement and global displacement were calculated and then, these values were compared and evaluated. The results were obtained as follows: 1. Intercentroidal distances of specimens decreased after both soldering procedures, and the decrease in intercentroidal distance was greater for torch soldered group than for electric soldered group 2. Global displacements of torch soldered group were greater than those of electric soldered group
Investments

The purpose of this study was to evaluate the effect of wattage and curing time on surface hardness, three-point bending strength and internal porosity of microwave curing denture base resin. Two sizes of resin spicimens were made of Acron MC ; 3.5x10x60mm for surface hardness and three-point bending strength measurement and 5x12x60mm for internal porosity measurement. They were cured by microwave energy at varing wattages(500W, 700W) and curing times(2min., 3min., 4min.) to determine if a certain wattage/curing time combination would improve physical properties. Surface hardness was measured with Vikers hardness tester, three-point bend-ing strength with universal testing machine and internal porosity was calculated by measuring the weight in air and in water. The results obtained were as follows : 1. There was no significant difference in percent porosity among experimental groups(p>0.05). 2. 500W/3min, group showed the higher surface hardness than 700W/2, 3, 4min. groups(p<0.05), and 700W/4 min. group showed the lower surface hardness than 500W/2, 3, 4min. groups(p<0.05), but there was no significant difference among others(p>0.05). 3. 500W/3min. group yielded the higher value of bending strength than 500W/2min., 700W/3, 4min. groups(p<0.05), but there was no significant difference among others(p>0.05).
Denture Bases* ; Dentures* ; Hardness ; Hardness Tests ; Microwaves* ; Polymethyl Methacrylate ; Porosity ; Water