Statement of Problem. Objective and quantitative measurement of implant stability is very important from implant installation to long-lasting maintenance period thereafter. Purpose of study. This study was to evaluate and compare two ISQ and PTVs on the implant stability measurements according to the increased effective implant length. Materials and Methods. Twenty self-tapping fixtures were installed in the bovine scapula and in 10 of those for group I, ISQ and PTVs were obtained in the vertical/horizontal directions according to the increased effective implant length using OsstellTM and Periotest? After stability measurement, removal torques were measured between the after installation and after thread exposure group. Results. ISQ and PTVs showed decreased and increased values according to the increased abutment length. Apart from PTVs, ISQ values were shown higher in horizontal direction to the long axis of bone in both the after installation and the after thread exposure groups. Removal torque values were shown higher in after installation group. Conclusion. From the results of this study, implant stability measurement using resonance frequency analysis was more sensitive and discriminative than PTVs measurement.
Axis, Cervical Vertebra ; Scapula ; Torque

This study is to determine the biomechanical characteristics of Korean adults. Male 32 and female 28 were participated for the measurement which was performed by immersion method and reaction board method. Body segments were head with neck, trunk, upper arm, forearm, hand, thigh, leg and foot. Their volumes were measures by immersion method. Their weight were determined by using Dempster (1955), Drills and Contini (1969) density data. Each COM (center of mass) of body segment weight were determined by specific posture on the reaction board. The postures were asked to the subject total arm-lifted posture, forearm-lifted posture, total leg-lifted posture, leg-lifted posture. According to each posture, the COM of each segment were calculated. Also, center positions of mass according to posture change were estimated. The results were compared with cadaver data from Dempster (1955), Cluaser (1969), Matsui (1958) which are applied very often and also bio data from Lim (1994) and Jung (1993) on Korean adults.
Adult* ; Arm ; Cadaver ; Female ; Foot ; Forearm ; Hand ; Head ; Humans ; Immersion ; Leg ; Male ; Methods ; Neck ; Posture ; Thigh

BACKGROUND: Desmosomes are adhesive intercellular junctions that form an important component of the junction complexes of epithelial cells. They provide intercellular links between the intermediate filament cytoskeletons of adjacent cells and are thus involved in maintaining the structural integrity of tissues. OBJECTIVE: Calcium and retinoids are major regulators of epidermal differentiation and their role on keratin proteins are well known. However, their effects on desmosome moleucles are unknown. To address this question we initiated a study of the effects of these epidermal differentiation regulators on desmosomal components, i.e., desmoplakin, desmoglein, and pemphigus antigens. METHODS: We used monoclonal antibodies against desmoplakin(DP) and desmoglein(DG), and sera from patients with pemphigus vulgaris(PV), pemphigus foliaceus(PF) and paraneoplastic pemphigus (PNP) to study the effects of calcium and retinoic acids, which are major regulators of epidermal differentation, on desmosomal protein formation in human cultured deratinocytes. We performed immunofluorescence, immunoblotting and immunoprecipitation study using human keratinocytes cultured in high calcium media with or without retinoic acid and in low calcium media with or without retinoic acid. RESULTS: 1. In low calcium (0.15mM) media, PV antigen and DG were produced in a small amount and it appeared that these desmosomal proteins were located in cytosol. Whereas in high calcium (1.8mM) media, production of these desmosomal proteins was increased not they were assembled at the desmosomal structures located in cell-cell contact margins. 2. PF antigen, which was identical to the DG, were not produced or expressed in cultured keratinocytes even when cultured in high calcium media. 3. PNP antigen and DP were produced in cultured keratinocytes grown in both high low calcium media but their production was increased in high calcium media and only in high calcium media they were assembled at the desmosomal structures. 4. Retinoic acids induced loosening of cell-cell contacts of cultured keratinocytes and decreased the production of desmosomal proteins. CONCLUSION: Our results suggests calcium is a major regulator of the production and assembly of desmosomal proteins including pemphigus antigens, but PF sera and monoclonal antibodies against DG show different antigen binding characteristics. It appears that retinoic acids inhibit production of desmosomal proteins.
Adhesives ; Antibodies, Monoclonal ; Calcium* ; Cytoskeleton ; Cytosol ; Desmogleins ; Desmoplakins ; Desmosomes* ; Epithelial Cells ; Fluorescent Antibody Technique ; Humans ; Immunoblotting ; Immunoprecipitation ; Intercellular Junctions ; Intermediate Filaments ; Keratinocytes ; Pemphigus ; Retinoids ; Tretinoin*

No abstract available.
Rupture* ; Spleen*

We roport herein three cases of pruritic urticarial papules and plaques of pregnancy in two primigravidas and one multigravida in erythematous papules and urticarial plaques on both thighs, buttock and upper extremites. In the second case, lesions initially developed on both thighs and then preaded on abdomen, back and exter ities. Abdomen, thighs and extremites were involved in the third case. Histopathologic findings revealed acanthosis orfocal spongiosis in epidermis and lymphocytic perivascular infiltration with or without eosinophilsn dermis. They were treated with systemiror topical steroids and, mtihistamines. Itching was relieved within a few days after therapy and skin lesions resolved spontaneously after delivery.
Abdomen ; Buttocks ; Dermis ; Epidermis ; Pregnancy* ; Pruritus ; Skin ; Steroids ; Thigh

No abstract available.
Salivary Glands*

The physical conditions of the Korean and the Japanese young adults (aged 18-29) were analyzed for the 10 important body dimensions such as stature, body weight, sitting height, chest circumference, and etc.. The Korean data published in 1979 and 1992 were compared with the Japanese data published in 1984 and 1994, respectively. Also, the physical developments and the sex differences of the Korean in past 13 years were compared with those of Japanese. The results are as follows. 1) The stature, sitting height and perineum height of the Korean young male and female are significantly smaller than those of the Japanese. 2) In the past, the chest circumference, waist circumference, hip circumference, body weight of the Korean are larger values than those of the Japanese. But, there are no significant differences in recent surveys. 3) Most body dimensions of male show significantly larger than those of female in the two countries. 4) There is no significant difference in thigh circumference between the Korean male and female in 1992. 5) There are no significant differences in thigh circumference between the '84 Japanese male and female and in hip circumference between the '94 Japanese male and female. 6) Compared with the results of the past surveys, the relative body weight, perineum height, and chest circumference of female to male are decreased in the two countries. But, the relative hip circumference of female to male are increased in both countries.
Asian Continental Ancestry Group* ; Body Weight ; Female ; Hip ; Humans ; Male ; Perineum ; Sex Characteristics ; Thigh ; Thorax ; Waist Circumference ; Young Adult

No abstract available.
Peritoneal Dialysis, Continuous Ambulatory*

In order to improve the traditional teaching method of the experiments,a kind of teaching mode “self-service teaching mode of biochemical experiments” with the character of original and modern thought is created. In turn the virtual instruments and experiments-monitoring system are designed by utilizing the computer technology.

STATEMENT OF PROBLEM: Titanium-Nickel alloy might be used in various prosthetic restorations since it has a unique property such as super-elasticity and high fatigue resistance. However, little is known about the casting ability of this alloy. PURPOSE: This in vitro study compared the casting accuracy and the porosity made with different investments and various sprue designs to ascertain what casting condition would be better for the fabrication of Ti-Ni cast restorations. MATERIAL AND METHODS: A total of 70 Ti-Ni alloy crowns were made and divided into 7 groups of 10 copings on a metal master die. For measuring the effect of the sprue numbers, two groups with one and two 8-gauge sprues were compared. Moreover, the results of the conventional sprue and the double thickness sprues were compared. Three investments were used; carbon free phosphate bonded investment, titanium investment and gypsum bonded investment. The cast restorations were evaluated at 48 points on the entire circumferential margin with a stereomicroscope measuring in micrometers. Each crown was radiographically examined for casting defects and porosity. Data on casting accuracy were analyzed using two-way and Post hoc Scheffe's comparison to determine whether significant differences existed at the 95% confidence level. Student-Newman-Keuls test were performed to identify significant differences in the number of voids. RESULTS: The double sprueing group and double thickness group had significantly less marginal discrepancy than the single sprueing group (P<.05 and P<.01, respectively). The castings with phosphate bonded investment showed the least marginal discrepancy and the smoothest surface. The castings invested in the gypsum bonded investment had the greatest gaps in margin and the largest failure rate. The double sprueing group and phosphate bonded investment group had significantly smaller void numbers and smaller void size than the other groups. CONCLUSION: Within the limitations of this in vitro study, the casting accuracy of the groups using thicker, double sprue design and the phosphate bonded investment was significantly superior. Moreover, void number and size were less than other groups.
Alloys ; Calcium Sulfate ; Carbon ; Celiac Disease ; Crowns ; Fatigue ; Investments ; Porosity* ; Titanium