OBJECTIVE

This review article aims to determine the properties, uses, toxicity, and other side effects of crosslinking agents in tissue scaffolds when applied in vitro and in vivo.

METHODS

A literature search was performed using the PubMed-NCBI (MEDLINE) database (https://pubmed.ncbi.nlm. nih.gov/) with keywords: crosslinking reagent, collagen, hydroxyapatite, and bone regeneration. GRADE criteria were used to assess the quality of evidence.

RESULTS

A total of six articles were included in the study. Improved mechanical properties of collagen-hydroxyapatite scaffolds with high porosity can be achieved by employing crosslinking methods, including physical dehydrothermal (DHT) treatment, chemical treatment with glutaraldehyde (GA), Microbial Transglutaminase (mTGase), 1‐ethyl‐3‐(3‐ dimethylaminopropyl) carbodiimide (EDAC), or a combination of both DHT and EDAC. Furthermore, the crosslinking of EDAC and DHT can lead to forming ester bonds between activated carboxyl groups and hydroxyl groups.

CONCLUSION

The combination of DHT and EDAC crosslinking can increase mechanical strength, make the pore size appropriate, make the scaffold more stable, and support cell adhesion so that new cells can grow, and the process of osteogenesis can run more optimally.

Cross-linking Reagents ; Collagen ; Durapatite ; Hydroxyapatite ; Bone Regeneration

BACKGROUND AND OBJECTIVES

Orthodontic tooth movement is driven by bone remodeling influenced by systemic factors, including caffeine and ethanol. This study aimed to investigate the effects of caffeine and ethanol on the expression of Receptor Activator of Nuclear Factor κβ (RANK) and Osteoprotegerin (OPG), key bone remodeling biomarkers, during orthodontic tooth movement.

METHODS

A laboratory experimental study was conducted on 30 male Wistar rats divided into three groups: K1 (orthodontic force only), K2 (force + caffeine), and K3 (force + ethanol). Orthodontic force was applied using Ni-Ti coil springs. Caffeine and ethanol were administered orally daily. On days 7 and 14, maxillary tissues were collected and analyzed via immunohistochemistry for RANK and OPG expression. Data were analyzed using One-Way ANOVA and Independent Sample T-tests with significance at pRESULTS

Caffeine and ethanol administration increased RANK and OPG expression compared to controls; however, only the ethanol group showed a significant increase in RANK expression on day 14 (p = 0.044). OPG expression was significantly higher in treatment groups at both time points (pCONCLUSION

Caffeine and ethanol modulate bone remodeling marker expression during orthodontic force application, with ethanol significantly increasing RANK expression at later stages. Further studies are needed to clarify the clinical implications for orthodontic treatment.

Animals ; Tooth Movement Techniques ; Tooth Movement ; Osteoprotegerin ; Role ; Movement ; Ethanol ; Bone Remodeling ; Caffeine ; Immunohistochemistry

OBJECTIVES: To study the clinical effect of the L-shape technique combined with concentrated growth factor on the horizontal bone defects of maxillary anterior teeth. METHODS: Twenty-five implants from 25 patients who underwent single maxillary anterior tooth implantation with simultaneous bone grafting were selected as the study subjects. Based on the bone grafting techniques, the patients were divided into a test group (L-shaped technique with guided bone regeneration combined with concentrated growth factor, 11 cases) and a control group (traditional guided bone regeneration combined with concentrated growth factor, 14 cases). The early discomfort and wound healing conditions in the two groups at two weeks after surgery were compared. The horizontal bone thickness, vertical bone thickness, and grayscale values in the augmentation area were measured immediately postsurgery and six months after surgery. Implant stability, hard tissue resorption within six months, and grayscale values were compared between the two groups. RESULTS: Differences in early discomfort, wound healing, implant stability, and grayscale values between the two groups were not statistically significant (P>0.05). Vertical bone thickness in the test group was significantly better than that in the control group at six months after surgery (P<0.05). The variation in horizontal bone thickness in the test group was significantly higher than that in the control group (P<0.05). CONCLUSIONS The application of the L-shape technique with concentrated growth factor for horizontal bone defects in the anterior maxillary area yielded satisfactory short-term results in terms of bone augmentation, early discomfort, wound healing, and implant stability at six months after surgery.
Humans ; Maxilla/diagnostic imaging* ; Intercellular Signaling Peptides and Proteins/therapeutic use* ; Wound Healing ; Bone Transplantation/methods* ; Dental Implantation, Endosseous/methods* ; Bone Regeneration ; Male ; Female ; Adult ; Dental Implants, Single-Tooth ; Middle Aged

Peri-implantitis is a pathologic condition associated with dental plaque that occurs in the implant tissue and is characterized by inflammation of the mucous membrane surrounding the implant, followed by the progressive loss of supporting bone. In this study, a case of guided bone regeneration therapy based on plaque control of peri-implant inflammation was reported. Four years after surgery for the left second premolar implant, the patient presented with "left lower posterior tooth swelling and discomfort for more than 2 years". The X-ray periapical film showed a decrease in distal bone mineral density of implant, and the clinical diagnosis was peri-implantitis of the left second premolar. Implants underwent guided bone regeneration and regular periodontal maintenance treatment. Re-examination at 3.5 months, 11 months, 18 months, and 7 years showed that the alveolar bone height and bone mineral density were stable, and the periodontal depth became shallow. However, the gingival recession was mild. In the present case, follow-up at 7 years demonstrated that the clinical periodontal indexes could be remarkably improved after complete periodontal treatment for peri-implantitis, and the alveolar bone could be well restored and regenerated.
Humans ; Peri-Implantitis/etiology* ; Follow-Up Studies ; Bone Regeneration ; Guided Tissue Regeneration, Periodontal/methods* ; Dental Plaque/prevention & control* ; Male ; Female ; Dental Implants/adverse effects*

OBJECTIVES: This study explores the differences in fluid flow within alveolar cancellous bone at various sites under orthodontic forces and elucidates the relationship between fluid shear stress and bone remodeling. These fin-dings lay the groundwork for understanding the biomechanical mechanisms of orthodontic tooth movement. METHODS: Stress relaxation tests were performed on human alveolar bone samples to determine material parameters by using the Prony series. An inverse model of alveolar bone was then developed for numerical simulations of fluid-structure interactions to calculate fluid flow within cancellous bone. Meanwhile, a rat model of tooth movement was established to investigate variations in bone remodeling speeds across different regions. RESULTS: The microstructural distribution of cancellous alveolar bone was similar in humans and rats. The bone volume fraction and trabecular thickness gradually decreased from root cervical region to root apical region, while the trabecular space gradually increased. Under the influence of orthodontic forces, fluid shear stress within cancellous bone showed spatial variability across different levels, with the highest shear stress occurring at the root apical region, ranging from 0 to 0.936 6 Pa. Additionally, the rat model of tooth movement indicated that bone remodeling occurred more rapidly at the root apical region. CONCLUSIONS Fluid stimulation has a remarkable effect on al-veolar bone remodeling, causing changes in the structure of alveolar bone and ultimately regulating the speed of structu-ral remodeling.
Bone Remodeling ; Animals ; Tooth Movement Techniques ; Rats ; Alveolar Process/physiology* ; Stress, Mechanical ; Humans ; Biomechanical Phenomena ; Cancellous Bone/physiology* ; Shear Strength

OBJECTIVES: To evaluate the osteogenic efficacy of three-dimensional printing individualized titanium mesh (3D-PITM) as a scaffold material in guided bone regeneration (GBR). METHODS: 1) Patients undergoing GBR for alveolar bone defects were enrolled as study subjects, and postoperative healing complications were recorded. 2) Postoperative cone beam computed tomography (CBCT) scans acquired at least 6 months post-surgery were used to calculate the percentage of actual bone formation volume. 3) Alveolar bone specimens were collected during the first-stage implant surgery for histomorphometric analysis. This analysis quantitatively measured the proportions of newly formed bone and newly formed unmineralized bone within the specimens. Specimens were categorized into three groups based on healing complications (good healing group, wound dehiscence group, 3D-PITM exposure group) to compare differences in the proportions of newly formed bone and newly formed unmineralized bone. RESULTS: 1) Twelve patients were included. Guided bone regeneration failed in one patient, and 3D-PITM exposure occurred in three patients (exposure rate: 25%). 2) The mean percentage of actual bone formation volume in the 11 successful guided bone regeneration cases was 95.23%±28.85%. 3) Histomorphometric analysis revealed that newly formed bone constituted 40.35% of the alveolar bone specimens, with newly formed unmineralized bone accounting for 13.84% of the newly formed bone. Intergroup comparisons showed no statistically significant differences (P>0.05) in the proportions of newly formed bone or newly formed unmineralized bone between the good healing group and the wound dehiscence group or the 3D-PITM exposure group. CONCLUSIONS 3D-PITM enables effective bone augmentation. Radiographic assessment demonstrated favorable bone formation volume, while histological analysis confirmed substantial formation of newly formed mineralized bone within the surgical site.
Humans ; Printing, Three-Dimensional ; Titanium ; Cone-Beam Computed Tomography ; Bone Regeneration ; Osteogenesis ; Surgical Mesh ; Tissue Scaffolds ; Alveolar Process/surgery* ; Adult ; Male ; Middle Aged ; Female ; Wound Healing ; Guided Tissue Regeneration, Periodontal/methods* ; Alveolar Bone Loss/surgery*

OBJECTIVES: Color doppler flow imaging (CDFI) and cone-beam computed tomography (CBCT) were utilized to evaluate changes in mucosal vascular parameters and the osteogenic effects following guided bone regeneration (GBR) in the maxillary anterior region using trapezoidal or modified triangular flaps. METHODS: Patients undergoing single maxillary anterior dental implant surgery with GBR were randomly allocated into two groups: a trapezoidal flap group and a modified triangular flap group. After GBR surgery, the mucosal vascular parameters at the surgical site were assessed at various time intervals (preoperative, 2 h, 1 and 3 days, and 1, 2, and 4 weeks postoperative) using CDFI. In addition, the effects of bone augmentation were evaluated through the analysis of CBCT images obtained preoperatively, 2 h, and 6 months postoperative. RESULTS: The buccal mucosa in the edentulous area had a lower blood flow rate than the corresponding tooth in the same jaw, and the difference was statistically significant (P<0.001). The mucosal blood flow rate in the surgical area increased compared with that in the preoperative period. The peak flow rate was recorded at 2 weeks postoperatively and then decreased to levels comparable to those of the reference tooth. A statistically significant difference was observed between the two groups (P<0.05). The buccal alveolar ridge width of the implant platform was reduced by (1.3±0.9) mm in the trapezoidal flap group and (0.9±0.7) mm in the modified triangular flap group, respectively, at 6 months postoperatively, compared with 2 h postoperative. The buccal alveolar ridge width of the 5 mm from the implant platform was reduced by (0.9±0.6) mm and (0.3±0.6) mm, respectively. The buccal alveolar ridge width of the 10 mm from the implant platform was reduced by (0.6±0.8) mm and (0.2±0.6) mm, respectively. The height of the alveolar ridge was reduced by (1.9±1.4 ) mm and (1.4±1.3) mm. The change in graft volume was (136±78 ) mm³ and (114±85) mm³. However, the differences between the two groups were not statistically significant (P>0.05). CONCLUSIONS When a tooth is missing, blood flow to the buccal mucosa on the side of the missing tooth is reduced. The modified triangular flap group demonstrated superior microcirculation of blood flow in the operative area after GBR of the maxillary anterior teeth. Trapezoidal and modified triangular flaps achieved the anticipated bone augmentation during bone augmentation surgery in the maxillary anterior region, with no considerable effect on the changes in alveolar bone size parameters.
Humans ; Surgical Flaps/blood supply* ; Bone Regeneration ; Mouth Mucosa/blood supply* ; Cone-Beam Computed Tomography ; Osteogenesis ; Maxilla/surgery* ; Male ; Female ; Guided Tissue Regeneration, Periodontal/methods*

Bisphosphonates(BP),a class of commonly used medications for treating osteoporosis and bone malignancies,significantly affect bone metabolism.When dental implants are placed in patients receiving BP,the potential impacts of BP on the formation and long-term maintenance of implant osseointegration cannot be ignored.In addition,the influence of dental implants on the occurrence of BP-related osteonecrosis of the jaw is garnering attention.This article explores the influences of BP on the stability of dental implants based on a review of previous animal and clinical studies,discusses the impact of dental implants on the occurrence of BP-related osteonecrosis of the jaw,and proposes suggestions for the dental implant treatment of patients taking BP in clinical practice.This review is expected to provide a theoretical basis for the related research and clinical treatment.
Humans ; Dental Implants ; Animals ; Diphosphonates/pharmacology* ; Osseointegration/drug effects* ; Bisphosphonate-Associated Osteonecrosis of the Jaw

OBJECTIVE: To identify the role of gene silencing or overexpression of Nemo-like kinase (NLK) during the process of neural differentiation of human mesenchymal stem cells (hBMSCs), and to explore the effect of NLK downregulation by transfection of small interfering RNA (siRNA) on promoting neuralized tissue engineered bone regeneration. METHODS: NLK-knockdown hBMSCs were established by transfection of siRNA (the experimental group was transfected with siRNA silencing the NLK gene, the control group was transfected with control siRNA and labeled as negative control group), and NLK-overexpression hBMSCs were established using lentivirus vector transfection technique (the experimental group was infected with lentivirus overexpressing the NLK gene, the control group was infected with an empty vector lentivirus and labeled as the empty vector group). After neurogenic induction, quantitative real-time polymerase chain reaction (qPCR) was used to detect the expression of neural-related gene, and Western blot as well as immunofluorescence staining about several specific neural markers were used to evaluate the neural differentiation ability of hBMSCs.6-week-old male nude mice were divided into 4 groups: ① β-tricalcium phosphate (β-TCP) group, ② β-TCP+ osteogenic induced hBMSCs group, ③ β-TCP+ siRNA-negative control (siRNA-NC) transfection hBMSCs group, ④ β-TCP+ siRNA-NLK transfection hBMSCs group. Four weeks after the subcutaneous ectopic osteogenesis models were established, the osteogenesis and neurogenesis were detected by hematoxylin-eosin (HE) staining, Masson staining and tissue immunofluorescence assay. Statistical analysis was conducted by independent sample t test. RESULTS: After gene silencing of NLK by siRNA in hBMSCs, neural-related genes, including the class Ⅲ β-tubulin (TUBB3), microtubule association protein-2 (MAP2), soluble protein-100 (S100), nestin (NES), NG2 proteoglycan (NG2) and calcitonin gene-related peptide (CGRP), were increased significantly in NLK-knockdown hBMSCs compared with the negative control group(P < 0.05), and the expression levels of TUBB3 and MAP2 of the NLK silencing group were also increased. Oppositely, after NLK was overexpressed using lentivirus vector transfection technique, TUBB3, MAP2, S100 and NG2 were significantly decreased in NLK-overexpression hBMSCs compared with the empty vector group (P < 0.05), and the expression level of TUBB3 was also decreased. 4 weeks after the subcutaneous ectopic osteogenesis model was established, more mineralized tissues were formed in the β-TCP+ siRNA-NLK transfection hBMSCs group compared with the other three groups, and the expression of BMP2 and S100 was higher in the β-TCP+ siRNA-NLK transfection hBMSCs group than in the other groups. CONCLUSION Gene silencing of NLK by siRNA promoted the ability of neural differentiation of hBMSCs in vitro and promoted neuralized tissue engineered bone formation in subcutaneous ectopic osteogenic models in vivo in nude mice.
Bone Regeneration/genetics* ; Animals ; Mesenchymal Stem Cells/cytology* ; Humans ; RNA, Small Interfering/genetics* ; Tissue Engineering/methods* ; Cell Differentiation ; Mice, Nude ; Gene Silencing ; Mice ; Male ; Protein Serine-Threonine Kinases/genetics* ; Intracellular Signaling Peptides and Proteins/genetics* ; Transfection ; Cells, Cultured ; Lentivirus/genetics*

OBJECTIVE: To investigate the biocompatibility of porous WE43 magnesium alloy scaffolds manufactured by 3D printing technology and to observe its effect in treating femoral defects in New Zealand white rabbits. METHODS: In vitro cytotoxicity test was performed using bone marrow mesenchymal stem cells from Sprague Dawley (S-D) rats. According to the different culture media, the cells were divided into 100% extract group, 50% extract group, 10% extract group and control group. After culturing for 1, 3 and 7 days, the cell activity of each group was determined by cell counting kit-8 (CCK-8). In the in vivo experiment, 3.0-3.5 kg New Zealand white rabbits were randomly divided into three groups: Experimental group, bone cement group and blank group, with 9 rabbits in each group. Each rabbit underwent surgery on the left lateral femoral condyle, and a bone defect with a diameter of 5 mm and a depth of 6 mm was created using a bone drill. The experimental group was implanted with WE43 magnesium alloy scaffolds, the bone cement group was implanted with calcium sulfate bone cement, and the blank group was not implanted. Then 4, 8 and 12 weeks after surgery, 3 rabbits in each group were euthanized by carbon dioxide anesthesia, and the femur and important internal organs were sampled. Micro-computed tomography (Micro-CT) scanning was performed on the left lateral femoral condyle. Sections of important internal organs were prepared and stained with hematoxylin-eosin (HE). Hard tissue sections were made from the left lateral femoral condyle and stained with methylene blue acid fuchsin and observed under a microscope. RESULTS: In the cytotoxicity test, the cell survival rate in the 100% extract group was higher than that in the control group (140.56% vs. 100.00%, P < 0.05) on 1 day of culture; there was no statistically significant difference (P>0.05) in cell survival rate among the groups on 3 days of culture; the cell survival rate in the 100% extract group was lower than that in the control group (68.64% vs. 100.00%, P < 0.05) on 7 days of culture. Micro-CT scanning in the in vivo experiment found that most of the scaffolds in the experimental group had been degraded in 4 weeks, with very few high-density scaffolds remaining. In 12 weeks, there was no obvious stent outline. In 4 weeks, a certain amount of gas was generated around the WE43 magnesium alloy scaffold, and the gas was significantly reduced from 8 to 12 weeks. Hard tissue sections showed that a certain amount of extracellular matrix and osteoid were generated around the scaffolds in the experimental group in 4 weeks. In the bone cement group, most of the calcium sulfate bone cement had been degraded. In 8 weeks, the osteoid around the scaffold and its degradation products in the experimental group increased significantly. In 12 weeks, new bone was in contact with the scaffold around the scaffold in the experimental group. There was less new bone in the bone cement group and the blank group. CONCLUSION The porous WE43 magnesium alloy scaffold fabricated by 3D printing process has good biocompatibility and good osteogenic properties, and has the potential to become a new material for repairing bone defects.
Animals ; Rabbits ; Printing, Three-Dimensional ; Alloys/chemistry* ; Tissue Scaffolds/chemistry* ; Magnesium/chemistry* ; Rats, Sprague-Dawley ; Biocompatible Materials ; Mesenchymal Stem Cells/cytology* ; Femur/surgery* ; Rats ; Absorbable Implants ; Male ; Bone Regeneration ; Tissue Engineering/methods* ; Cells, Cultured