PURPOSE: Central retinal vein occlusion (CRVO) often produces significant and permanent loss of vision in the affected eye, however there is no known effective treatment of CRVO. By restoration of retinal venous circulation via radial optic neurotomy (RON), we want to know the efficacy and complication of radial optic neurotomy were evaluated. METHODS: Ten eyes of 10 consecutive patients diagnosed as CRVO in Chonbuk national university hospital with best visual acuity 0.1 or worse underwent RON after a standard three-port vitrectomy as Opremcak's study. The average duration of the CRVO prior to RON was 2.4 months with a range of 1-9 months. RESULTS: The average follow-up was 5 months with a range of 1-12 months. Equal or better postoperative visual acuity, rapid resolution of intraretinal hemorrhage and restoration of normal retinal vasculature were noted in 8 of the 10 (80%) patients. 5 of the 10 (50%) patients had a final visual acuity of 0.1 or better. two patients achieved 0.3 final visual acuity, one patient achieved 0.6 final visual acuity. CONCLUSIONS: Compared with others without any treatment, RON may be a beneficial surgical procedure for severe CRVO and 0.1 or worse visual acuity. More cases and longer follow-up are needed to establish the indication, efficacy, and safety of RON in CRVO
Follow-Up Studies ; Hemorrhage ; Humans ; Jeollabuk-do ; Retinal Vein* ; Retinaldehyde ; Visual Acuity ; Vitrectomy

There are numerous studies about the transformation of renal pathology during lupus nephritis progression. A number of researchers suggest that patients with previous proliferative glomerulonephritis may not need to repeat renal biopsy in relation to treatment strategies. However, the pathology of renal biopsy could offer important information to clinicians about the progression of disease. Here, we report a rare case of the convertion of ISN/RPS classification from a proliferative lesion to a wholly non-proliferative lesion. A 40-year-old female was admitted complaining of generalized edema for 1 month. At the age of 33 she had been diagnosed as SLE with proliferative lupus nephritis. The renal remission was induced with corticosteroid pulse therapy and 12 cycles of intravenous cyclophosphamide treatment. The repeated renal biopsy revealed class V lupus nephritis compared with referential biopsy of class IV-G. A better prognosis is expected with lower activity and a lower chronicity index. Repeat renal biopsy may give useful information relating to the prognosis of nephritis.
Adult ; Biopsy ; Cyclophosphamide ; Edema ; Female ; Glomerulonephritis ; Humans ; Lupus Nephritis ; Nephritis ; Prognosis

The use of implants could improve the support, retention, and stability of removable prosthetic restoration for fully edentulous patients with severe alveolar bone resorption. When the prosthesis is manufactured without accurate diagnosis and evaluation, this may lead to unfavorable treatment result. The patient in this case had the treatment of implant overdentures at a private dental clinic, but visited the hospital for retreatment due to soft tissue pain and decreasing retention of existing dentures. The vertical dimension was raised compared to the existing dentures, and overdentures were manufactured using milled bars and additional attachments. The clinical results were satisfactory in the aspect of improved oral hygiene maintenance, function and esthetics.

One of the treatment options for edentulous state patients with residual ridge resorption is implant overdenture using milled bar and attachment. It not only provides improved retention and stability but can also reduce the coverage of palatal surface. In addition, when a small number of implants are used, milled bar has the effect of being splinted between implant fixtures, which makes it mechanically advantageous under functions such as mastication. The patient in this case was a maxillary edentulous state patient with a considerable amount of residual alveolar bone resorption after removing the existing failed implants. Three implants were planted on both sides and an implant overdenture was fabricated using milled bar and ADD-TOC attachment.

Excessive crown height space increases can cause crestal bone loss and screw loosening after prosthesis is placed. Milled bar and implant overdenture can be used as a treatment method for partially edentulous patients who have severe alveolar bone loss and excessive crown height space. Milled bar can provide primary splinting effect and stability between implants. Also, milled bar with additional retention device such as Advanced Dental Device-Treatment Of Choice (ADD-TOC) and magnet can provide additional retention force for implant overdenture. In this case, the patient has a partially edentulous mandible that has severe alveolar bone loss and multiple number of teeth loss after excision due to leiomyosarcoma. Because of the long-term loss of mandibular molars, the opposing teeth were extruded. Maxillary left molars were corrected to the occlusal plane through molar intrusion, and mandibular left molar region were treated with implant overdenture, using milled bar with ADD-TOC and magnet after implant placement. The clinical result was satisfactory on the aspect of esthetic and masticatory function.

Among many contributing factors of implant failure, excessive loading and inflammation contribute mainly to increasing implant failure rate. Especially, poor oral hygiene around implants is one of the most common reasons for implant failure. When implant prosthesis fails to function, the clinician should re-diagnose and plan treatment using the remaining implants. Additional implantation may be needed to make a new type of prosthesis or either implant-assisted RPD and implant overdenture treatment may be performed using the remaining implants.In this article, a patient whose fixed implant prosthesis in the maxilla had failed of poor oral hygiene maintenance was reported to be recovered with removable implant overdenture by using remaining implant abutments and a milled bar with additional retentive elements. Through this treatment, the clinical results were satisfactory in terms of esthetics, masticatory function recovery and oral hygiene management.

Traditionally, gingival retraction has been performed to obtain customized abutment impressions with subgingival margins of the implant supported prosthesis. However, gingivalretraction may have side effects such as gingival recession and bleed, leading to an inaccurate impression. In order to prevent these problems, in this case, the new techniquehas been introduced; a customized abutment which is designed for superimposition is used. Before the connection of the abutment to the implant fixture, pre-scannedshape data are stored, and then the optical impression without gingival retraction is obtained after connecting to the fixture. The suprastructure is fabricated by superimposingthe two data. This technique showed the clinical efficacy of fabricating the implant supported prosthesis with subgingival margin, which satisfied the aesthetics, convenience,and clinically acceptable marginal and internal fit. (J Korean Acad Prosthodont 2020;58:169-75)

Failure of fixed implant supported prosthesis is caused by biomechanical factors such as excessive occlusal stress and biological factors such as bacterial infections andinflammation. Implants with severe bone resorption that have worsened without being resolved due to implant complications should be removed and then new treatmentsshould be planned, taking into account remaining teeth, remaining implants, and residual alveolar. The patient of this case removed some of fixed implant prosthesis of mandible.The condition of the remaining alveolar bone was reassessed for further implant replacement and a few implants were placed. Then implant assisted removable partialdenture (IAPRD) treatment is performed using implant surveyed bridge as abutment. Through this treatment, the clinical results were satisfactory on aspect of masticatoryfunction recovery and oral hygiene management. (J Korean Acad Prosthodont 2020;58:161-8)

were satisfactory on the aspect of esthetic and masticatory function. (J Korean Acad Prosthodont 2020;58:137-44)

For patients with unstable mandibular movements and centric relation of the mandible due to long-term use of ill-fitting dentures, the successful fabrication of new dentures is challenging. Before fabrication new dentures, registration of centric relation is the critical point in such cases. In this case, treatment dentures with a flat occlusal table were used to stabilize mandibular movements and to register centric relation. In order to reflect the patient's jaw relation and vertical dimension obtained through the treatment dentures to the final denture, the treatment dentures were digitally duplicated, and impressions and jaw relations were obtained using the duplicated therapeutic dentures. The clinical results were satisfactory on the aspect of aesthetic and masticatory functioned.