The present study was conducted to compare the effects of xenogenic bovine fetal demineralized bone matrix (DBM), commercial DBM, omentum, omentum-calf fetal DBM, cortical autograft and xenogenic cartilage powder on the healing of tibial defects in a dog model to determine the best material for bone healing. Seven male adult mongrel dogs, weighing 26.2 +/- 2.5 kg, were used in this study. Seven holes with a diameter of 4-mm were created and then filled with several biomaterials. Radiographs were taken postoperatively on day 1 and weeks 2, 4, 6, 8. The operated tibias were removed on the 56th postoperative day and histopathologically evaluated. On postoperative days 14, 42 and 56, the lesions of the control group were significantly inferior to those in the other group (p < 0.05). On the 28th postoperative day, the autograft group was significantly superior to the control and omentum groups (p < 0.05). Moreover, calf fetal DBM was significantly superior to the control group. There was no significant difference between the histopathological sections of all groups. Overall, the omentum and omentum-DBM groups were superior to the control group, but inferior to the autograft, commercial-DBM, calf fetal DBM and calf fetal cartilage groups.
Animals ; Autografts/*transplantation ; Biocompatible Materials/*therapeutic use ; *Bone Regeneration ; Cattle ; Dogs ; Male ; Omentum/*transplantation ; *Wound Healing

Silk fibroin, a natural fibrin, is a suitable matrix biomaterial for wound repair due to its unique properties such as good biocompatibility, tunable biodegradation and mechanical properties, low host inflammatory response, low cost, ease of fabrication, etc. Silk fibroin can be used alone or in combination with other materials to construct various dressings including scaffolds, hydrogels, films, smart mats, and microneedles, which can meet the needs of different wound repair and regulate the wound repair process. Thus, the application research of silk fibroin in skin tissue engineering has increased dramatically. Compared with other natural materials, silk fibroin promotes tissue regeneration and wound repair by improving cell proliferation, migration, and differentiation behavior at different stages, showing unique advantages in different dimensions. Based on the development of silk fibroin wound repair materials in the recent years, this review focuses on the mechanism and application prospect of silk fibroin and its composite materials in wound repair.
Fibroins/metabolism* ; Biocompatible Materials/therapeutic use* ; Tissue Engineering ; Hydrogels ; Fibrin ; Tissue Scaffolds

Wound repair is a highly coordinated and mutually regulated complex process involving various kinds of cells, extracellular matrices and cytokines. A variety of growth factors play an important regulatory role in wound healing, and it is critical to achieve effective delivery and sustained function of growth factors. In recent years, the application of biomaterials in tissue engineering has shown great potential, and the effective delivery of growth factors by biomaterials has attracted increasing attention. Based on this, this paper introduces the mechanism of related growth factors in the process of wound healing, focusing on the recent progress of biomaterial delivery of growth factors to accelerate wound healing, in order to provide new enlightenment for clinical wound treatment.
Biocompatible Materials/metabolism* ; Extracellular Matrix/metabolism* ; Intercellular Signaling Peptides and Proteins/therapeutic use* ; Tissue Engineering ; Wound Healing

OBJECTIVE: To review the research progress of natural biomaterial polyhydroxyalkanoate (PHA) in orthopedics. METHODS: The literature concerning PHA devices for bone defects, bone repair, and bone neoplasms, respectively, in recent years was extensively consulted. The three aspects of the advantages of PHA in bone repair, the preparation of PHA medical devices for bone repair and their application in orthopedics were discussed. RESULTS: Due to excellent biodegradability, biocompatibility, and potential osteoinduction, PHA is a kind of good bone repair material. In addition to the traditional PHA medical implants, the use of electrostatic spinning and three-dimensional printing can be designed to various functional PHA medical devices, in order to meet the orthopedic clinical demands, including the bone regeneration, minimally invasive bone tissue repair by injection, antibacterial bone repair, auxiliary establishment of three-dimensional bone tumor model, directed osteogenic differentiation of stem cells, etc. CONCLUSION At present, PHA is a hotspot of biomaterials for translational medicine in orthopedics. Although they have not completely applied in the clinic, the advantages of repair in bone defects have been gradually reflected in tissue engineering, showing an application prospect in orthopedics.
Orthopedics ; Osteogenesis ; Arthrodesis ; Anti-Bacterial Agents ; Biocompatible Materials ; Polyhydroxyalkanoates/therapeutic use*

This paper describes the biological characteristics of the metal tantalum (Ts) and the application status of tantalum in artificial joints, bone necrosis, spine, defects of bone and other aspects of bone. The early clinical application results of tantalum in bone diseases were satisfactory, but it is necessary to do further study of tantalum in a deep going way, and further detailed comparison between the tantalum with other metals as orthopedics implants. The advantage of tantalum materials as orthopedic implants still needs to be verified by a great deal of clinical cases for a long period of time.
Biocompatible Materials ; therapeutic use ; Bone Diseases ; surgery ; Humans ; Orthopedic Fixation Devices ; Orthopedic Procedures ; instrumentation ; Prostheses and Implants ; Tantalum ; therapeutic use

BACKGROUNDGlaucoma filtering surgery (GFS) is the most common procedure performed in the treatment of glaucoma. Although antiscarring agents help prevent postsurgical scarring and improve glaucoma surgical outcomes, they may be associated with an increased incidence of severe and potentially blinding complications. Poly(DL-lactide-co-glycolide) (PDLLA/GA) is a bioresorbable polymer, which can be prepared with a large range of physical, mechanical, and biological properties and has been widely used in medicine, including as an absorbable suture and a drug carrier and especially as a scaffold in tissue engineering. This study aimed to evaluate the effect of PDLLA/GA on scar formation after glaucoma filtration surgery (GFS).

METHODSForty-eight New Zealand white rabbits were divided into two groups randomly and GFS was performed on the right eye of each. PDLLA/GA membranes were put under the sclera flap for evaluation. GFS with no membrane inserted served as control. Clinical evaluations of intraocular pressure (IOP) and the presence of a filtration bleb were performed at intervals (3 days, 1, 2, 4, 8, 12, 20, and 24 weeks) postoperatively. At each time point, three eyes per group were excised to observe histological changes such as inflammation and scar formation and the expression of collagen type IV, proliferating cell nuclear antigen (PCNA), matrix metalloproteinase-9 (MMP-9), and tissue inhibitor of metalloproteinase-1 (TIMP-1). The expression of connective tissue growth factor (CTGF) mRNA was determined by reverse transcription-polymerase chain reaction.

RESULTSThe lower IOP level and an effective bleb were maintained for a long time after GFS in the PDLLA/GA group. The histological analysis showed less inflammation and scar formation, weaker expression of collagen type IV and PCNA, more intense MMP-9 and TIMP-1, slightly elevated ratio of MMP-9 and TIMP-1, and a smaller increase in CTGF mRNA postoperatively in the PDLLA/GA group but less than the control group (P < 0.05).

CONCLUSIONPDLLA/GA membranes may be promising for preventing fibrosis after GFS.

Animals ; Biocompatible Materials ; therapeutic use ; Cicatrix ; prevention & control ; Filtering Surgery ; Glaucoma ; drug therapy ; surgery ; Lactic Acid ; therapeutic use ; Polyglycolic Acid ; therapeutic use ; Rabbits

OBJECTIVETo seek new method for the treatment of peripheral nerve injury.

METHODSIn rat model with sciatic nerve defect, chitosan-collagen film was sutured into conduit to bridge 5 mm, 10 mm nerve defects. Rats that underwent end-to-end anastomosis were taken as controls. General observation, electrophysiological study, histological study and image analysis were performed at 4, 8, 12 weeks postoperatively.

RESULTSIn 5 mm nerve defects, the quality of nerve regeneration was similar to that of the control group. For 10 mm nerve defect, nerve regeneration was inferior to that of the control group. Chitosan-collagen film obviously degraded at 12 weeks postoperatively.

CONCLUSIONSChitosan-collagen film conduit can be used to bridge peripheral nerve defect.

Animals ; Biocompatible Materials ; therapeutic use ; Chitin ; analogs & derivatives ; therapeutic use ; Chitosan ; Collagen ; therapeutic use ; Male ; Models, Animal ; Nerve Regeneration ; Rats ; Rats, Wistar ; Sciatic Nerve ; injuries ; physiology ; surgery

OBJECTIVETo explore the method to repair bone defect with bone-morphogenetic-protein loaded hydroxyapatite/collagen-poly(L-lactic acid) composite.

METHODS18 adult beagle dogs were randomly divided into 3 groups. In Group A, bone-morphogenetic-protein (BMP) loaded hydroxyapatite/collagen-poly(L-lactic acid) (HAC-PLA) scaffold was implanted in a 2 cm diaphyseal defect in the radius. In Group B, unloaded pure HAC-PLA scaffold was implanted in the defects. No material was implanted in Group C (control group). The dogs were sacrificed 6 months postoperatively. Features of biocompatibility, biodegradability and osteoinduction were evaluated with histological, radiological examinations and bone mineral density (BMD) measurements.

RESULTSIn Group A, the radius defect healed after the treatment with BMP loaded HAC-PLA. BMD at the site of the defect was higher than that of the contralateral radius. Fibrous union developed in the animals of the control group.

CONCLUSIONSBMP not only promotes osteogenesis but also accelerates degradation of the biomaterials. Optimized design parameters of a three-dimensional porous biomaterial would give full scope to the role of BMP as an osteoinductive growth factor.

Animals ; Biocompatible Materials ; therapeutic use ; Bone Morphogenetic Proteins ; therapeutic use ; Bone Substitutes ; therapeutic use ; Collagen ; therapeutic use ; Dogs ; Durapatite ; therapeutic use ; Lactic Acid ; therapeutic use ; Microscopy, Electron, Scanning ; Osseointegration ; Osteogenesis ; Radiography ; Radius ; diagnostic imaging ; pathology ; Wound Healing ; physiology

Polyethersulfone (PES) hollow fibers were fabricated by dry-wet spinning method for hemodialysis application. The effects of additives polyethylene glycols (PEG) in the dope solution and of fiber thickness and inner diameter fiber on the membrane mechanical characters were investigated. The dialysis tests were conducted by using a simulated solution prepared by dissolving bovine serum albumin (BSA), lysozyme and urea in de-ionized water to test the effects of membrane characters and operating conditions on dialysis efficiency. The results indicated that the reduction of PEG concentration from 27.6 wt% to 24.1 wt% in the dope solution improved the clearance of toxins, but slightly decreased the mechanical characters. The reduction of fiber thickness or fiber inner diameter was found to improve the clearance of toxins by removing 64.2% of lysozyme and 89.4% of urea (membrane area 0.2 m2), whilst BSA retention was found being maintained above 98%. The dialysis efficiency was also noted to increase with the increase in the flow rate of either the simulated or the dialysate solution, or increasing the membrane area. Moreover, The result of a comparison on the clearance of toxins between commercial F60S and PES dialyzers indicated higher dialysis efficiency per area of the fabricated PES membrane.
Biocompatible Materials ; therapeutic use ; Evaluation Studies as Topic ; Membranes, Artificial ; Polyethylene Glycols ; chemistry ; Polymers ; chemistry ; Renal Dialysis ; instrumentation ; methods ; Sulfones ; chemistry

OBJECTIVETo study the feasibility and authenticity of repairing alveolar defects in alveolar cleft patients with osteoinduction active material (OAM) in clinic.

METHODSTwenty-seven cases of alveolar defect chosen from clinic were divided into two groups (test group and control group). For test group (12 cases), OAM was transplanted to repair the alveolar cleft. For control group (15 cases), autogenous ilium cancellous bone were transplanted into the defect region to repair alveolar cleft. At 6 months after operation, CT and three-dimensional reconstruction were used to observe alveolar appearance, and the effect and clinical success rate of recover alveolar cleft by using different repair material were compared.

RESULTSIn the 27 cases, all the maxillary continuity was restored except two of test group and two of control group. There was no significant difference between test group and control group regarding the clinical success rate of the alveolar cleft repair (P = 1.000).

CONCLUSIONOAM was used to repair the alveolar cleft that can result in new bone formations and the burgeon of canines from the bone grafted areas. There is no significant difference between OAM and autogenous ilium cancellous bone regarding the effect of the alveolar cleft repair.

Alveolar Process ; pathology ; surgery ; Biocompatible Materials ; therapeutic use ; Bone Regeneration ; Bone Transplantation ; Cleft Palate ; surgery ; Humans ; Ilium ; transplantation