Minimal intervention dentistry (MID) is a new approach to caries management in older patients, which emphasize on early discussion, early diagnosis and early treatment. It focuses on stopping the disease process and patient-friendly surgical intervention only when required. Geriatric MID can improve oral ecological balance, lower caries risk, reverse dental caries process and reduce the pain when surgical intervention required. It can help clinicians in coping with erosion, abrasion, demineralization, rampant dental caries, retained roots, recurrent caries, subgingival caries, "wet" oral environment, salivary dysfunction, high plaque levels, swollen or bleeding gum and poor compliance in older patients. This article mainly describes the application of MID in surgical intervention of dental caries, including the strategies for caries removal, cavity preparation, choice of biology material, management of erosion and abrasion, "wet" subgingival environment and vital pulp therapy.
Aged, 80 and over ; Dental Caries ; Dental Plaque ; Dentistry ; Humans

The ageing of Chinese population combined with development of geriatric dentistry results in increased retention of natural teeth and higher risk of dental caries in older patients. This means new challenge for clinicians. Minimal intervention dentistry (MID) is a new approach to caries management in older patients, which emphasize on early discussion, early diagnosis and early treatment. It focuses on stopping the disease process and patient-friendly surgical intervention only when required. This article describes the application of MID in geriatric caries management: Assessment of the risk of caries; early detection (before cavity appears); external and internal remineralization.
Aged ; Dental Caries ; Dentistry ; Humans

OBJECTIVETo evaluate the accuracy of 3 impression materials in reproductions of simian dental arches using a 3-dimensional optical digitizer.

METHODSTwo simian dental arches were prepared as the master models. Impressions were made for stone casts using three impression materials, including alginate impression materials, C-silicone materials and Impregum-Penta polyether rubber. Five plaster replication models for each master model, as well as for each impression materials were made. The master models and the casts were digitized using a 3-dimensional optical scanner and digitizer. The images of each plaster cast and its original master model were superimposed to obtain the setting cross-section volume of the dental crown. The ratios of the plaster cast volume change and discrepancy distribution patterns were analyzed.

RESULTSCompared with the volume of the master models, the discrepancies of the plaster casts volume were -5.84%, -3.21%, and -0.63% for alginate impression materials, silicone materials and Impregum-Penta polyether rubber, respectively. The discrepancy between the master models and casts from alginate material was statistically significant (P<0.05), but not for silicone materials or Impregum-Penta polyether rubber. Maximal deviation of image fitting was located in the cervix and the gingival areas.

CONCLUSIONThe volumes of all the plaster casts from the 3 impression material are smaller than that of the master model. Impregum-Penta polyether rubber allows the most precise and silicone material the relatively accurate reproduction of the denture model, while alginate can not. The major error areas are in the dental cervix and gingival region.

Dental Casting Technique ; Dental Impression Materials ; chemistry ; Dental Impression Technique ; Dental Models ; Humans ; Imaging, Three-Dimensional ; methods

BACKGROUNDThe low-temperature resistance aging performance of Yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) is the key effective factor that influences the long-term success rate of prosthesis. The objective of this study was to test and compare the aging performances for resisting low temperature of Lava Frame, Cercon Smart, and Upcera Yttria-stabilized zirconia core materials, via analyzing the micro and the crystal phases of the materials, and measure the three-point bending strength and the fracture toughness.

METHODSThe three zirconia green bodies were prepared as 60 test samples for three-point bending strength and as 60 test samples for fracture toughness. The test samples for three-point bending strength and fracture toughness were assigned to five groups and were treated respectively for 0, 5, 10, 15, and 20 hours to observe the micro and the crystal phases of the test samples. Then the three-point bending strength and fracture toughness were tested by X-ray diffraction (XRD).

RESULTSThe m phase content of Lava Frame was raised from 7.70% to 13.01%; the m phase content of Cercon Smart was raised from 4.95% to 8.53%; and Lava Frame is raised from 10.84% to 35.18%. The three-point bending strengths of the three zirconia core materials were higher than 1100 MPa and the fracture toughness was higher than 3 MPa·m(1/2). The three-point bending strength and the fracture toughness of Upcra zirconia decreased the most, followed by Lava Frame, and then by Cercon Smart.

CONCLUSIONThe aging resistance sequences of the three zirconia core materials are, from strong to weak, Cercon Smart, Lava Frame, and Upcera.

Ceramics ; chemistry ; Dental Porcelain ; chemistry ; Microscopy, Electron, Scanning ; Temperature ; X-Ray Diffraction ; Yttrium ; chemistry ; Zirconium ; chemistry

Background The low-temperature resistance aging performance of Yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) is the key effective factor that influences the long-term success rate of prosthesis.The objective of this study was to test and compare the aging performances for resisting low temperature of Lava Frame,Cercon Smart,and Upcera Yttria-stabilized zirconia core materials,via analyzing the micro and the crystal phases of the materials,and measure the three-point bending strength and the fracture toughness.Methods The three zirconia green bodies were prepared as 60 test samples for three-point bending strength and as 60 test samples for fracture toughness.The test samples for three-point bending strength and fracture toughness were assigned to five groups and were treated respectively for 0,5,10,15,and 20 hours to observe the micro and the crystal phases of the test samples.Then the three-point bending strength and fracture toughness were tested by X-ray diffraction (XRD).Results The m phase content of Lava Frame was raised from 7.70％ to 13.01％; the m phase content of Cercon Smart was raised from 4.95％ to 8.53％; and Lava Frame is raised from 10.84％ to 35.18％.The three-point bending strengths of the three zirconia core materials were higher than 1100 MPa and the fracture toughness was higher than 3 MPa·m1/2.The three-point bending strength and the fracture toughness of Upcra zirconia decreased the most,followed by Lava Frame,and then by Cercon Smart.Conclusion The aging resistance sequences of the three zirconia core materials are,from strong to weak,Cercon Smart,Lava Frame,and Upcera.

Hepatitis B virus (HBV) has an important role in the development of human hepatocellular carcinoma (HCC). Accumulated evidence has shown that HBV-encoded X protein (HBx) can induce both genetic alterations in tumor suppressor genes and oncogenes, as well as epigenetic aberrations in HCC pathogens. Non-coding RNAs (ncRNAs) mainly include microRNAs and long non-coding RNAs (lncRNAs). Although ncRNAs cannot code proteins, growing evidence has shown that they have various important biological functions in cell proliferation, cell cycle control, anti-apoptosis, epithelial–mesenchymal transition, tumor invasion and metastasis. This review summarizes the current knowledge regarding the mechanisms and emerging roles of ncRNAs in the pathogenesis of HBV-related HCC. Accumulated data have shown that ncRNAs regulated by HBx have a crucial role in HBV-associated hepatocarcinogenesis. The findings of these studies will contribute to more clinical applications of HBV-related ncRNAs as potential diagnostic markers or as molecular therapeutic targets to prevent and treat HBV-related HCC.
Carcinoma, Hepatocellular* ; Cell Cycle Checkpoints ; Cell Proliferation ; Epigenomics ; Genes, Tumor Suppressor ; Hepatitis B virus* ; Hepatitis B* ; Hepatitis* ; Humans* ; MicroRNAs ; Neoplasm Metastasis ; Oncogenes ; RNA, Long Noncoding ; RNA, Untranslated*

OBJECTIVETo investigate the role of excretory/secretory antigens from Clonorchis sinensis (CsESAs) in hepatic fibrosis induced by C. sinensis infection in rats and explore the possible mechanism.

METHODSCsESAs was collected from adult C. sinensis cultured in sterile condition for 12 h and injected intraperitoneally in Wistar rats. Masson staining was used to observe the changes in the hepatic collagen fiber after the injection. HE staining and immunofluorescence staining were performed to detect the expression of alpha-smooth muscle actin (alpha-SMA) to examine the proliferation and the activity of hepatic stellate cells. The specific antibody titer of CsESAs was determined using enzyme-linked immunosorbent assay to investigate the role of the antigen-antibody complex in the development of hepatic fibrosis.

RESULTSAfter intraperitoneal injection of CsESAs, obvious hepatic fibrosis and hepatic stellate cell proliferation and activation were observed in the rat livers. The severity of the hepatic fibrosis was associated with the dose of CsESAs injected, whereas the titer of the specific antibody against CsESAs showed no direct relation to the hepatic fibrosis.

CONCLUSIONIntraperitoneal injection of CsESAs can cause hepatic stellate cell activation and hepatic fibrosis in rats, but the antigen-antibody complex does not seem to play the key role in the activation of the hepatic stellate cells.

Actins ; metabolism ; Animals ; Antigens, Helminth ; immunology ; Clonorchiasis ; parasitology ; Clonorchis sinensis ; immunology ; pathogenicity ; Hepatic Stellate Cells ; pathology ; Liver Cirrhosis ; immunology ; parasitology ; Male ; Rats ; Rats, Wistar

OBJECTIVETo study the effect of methylene blue on the growth and acid production of Streptococcus mutans, and the effect of methylene blue on acid production metabolism in plaque glycolysis model (i-PGM) in vitro, and investigate the practicability of methylene blue as a new kind of dental caries prevention agent.

METHODSNephelometer method was used to measure OD value of Streptococcus mutans culture fluid in the different incubation conditions. The kinds and quantities of acid produced by Streptococcus mutans in the different incubation conditions were measured with gas chromatography. pH values of glycolysis buffer media of i-PGM in the different treatment conditions were measured by ORION electrode.

RESULTS(1) The OD value of Streptococcus mutans treated by methylene blue was lower than that by normal saline, and there was significant statistical difference between them. (2) The kinds of acid in three different culture fluid were same, but the total quantities of acid were significantly different among three different culture fluid, in which the total quantities of acid of culture fluids treated by glucose was the greatest, and treated by methylene blue was the lest. (3) The pH value of i-PGM treated by methylene blue was significantly different compared with negative control group, but was not significantly different compared with positive control group.

CONCLUSIONMethylene blue can inhibit the growth and acid production metabolism of Streptococcus matans and acid production metabolism of i-PGM.

Dental Caries ; Dental Plaque ; Glycolysis ; Methylene Blue ; Streptococcus mutans

OBJECTIVE To explore the antitumor effects of combined tanshinoneⅠ(TanⅠ),metformin (Met) and aspirin (Asp) on malignant melanoma in mice and the possible mechanisms. METHODS C57BL/6 mice were injected with 0.1 mL B16F10 cells(2.8×109L-1)to establish the subcutaneous trans-plantation tumor model at the right forelimbs axillary.Then,the mice were divided into 8 groups according to body mass,including model group, TanⅠgroup(20 mg·kg-1,ip),Asp group(210 mg·kg-1,orally in drinking water), Met group (70 mg·kg-1, orally in drinking water), Asp+Met group, TanⅠ+Asp group, TanⅠ+Met group and TanⅠ+Asp+Met group,10 mice in each group.Each mouse drank about 7 mL of water every day for a total of 18 d.The mouse body mass was measured every other day and the tumor diameter was calculated every day. The mice were sacrificed after treatment, the tumor mass was measured and the tumor inhibitory rates were counted. The histopathological changes of the liver and spleen were observed with HE staining. The percentage of lymphocytes in the tumor tissue such as CD8+T,CD4+T and Treg cells was detected by flow cytometry.Inflammatory factors such as interleukin-6 (IL-6),IL-1β and tumor necrosis factor-α (TNF-α) were detected by ELISA. RESULTS The body mass (including tumor mass)of mice in different groups increased during the experiment,but that of TanⅠ+Asp+Met group increased more slower than in model group(P<0.01).At the end of the experiment,no lesions were seen in any liver or spleen tissue by pathological observation,and the number of survivors was 8/10(model group),8/10(TanⅠgroup),7/10(Asp group),7/10(Met group),8/10(TanⅠ+Asp group), 8/10 (TanⅠ+Met group), 7/10 (Asp+Met group) and 5/10 (TanⅠ+Asp+ Met group), respectively. Compared with model group,there were no obvious changes in tumor volume or tumor mass in TanⅠ, Asp and Met groups and other two-two joint groups,but the tumor volume and tumor mass in TanⅠ+Asp+ Met group were significantly decreased (P<0.01, P<0.05), and the tumor inhibitory rate in this group was 46.2%.Compared with the model group,the percentage of CD8+T cells increased(P<0.05) in TanⅠ+Asp+Met group,but there were no significant changes in other groups.The contents of IL-6, IL-1β and TNF-α in tumor tissue of TanⅠ+Met group were much higher than in model group(P<0.01, P<0.05,P<0.05)and the content of IL-6 increased in TanⅠ+Asp+Met group(P<0.01).CONCLUSION Combination of TanⅠ,Asp and Met can effectively inhibit the growth of melanoma in mice,which may be related to the increasing percentage of CD8+T lymphocytes and IL-6 in tumor tissue.However there are possibly some side effects.

OBJECTIVETo investigate the antigen clearance time, time to symptom disappearance, and the association between them using immunofluorescence assay for dynamic monitoring of influenza virus antigen in children with influenza.

METHODSA total of 1 063 children suspected of influenza who visited the Hunan People's Hospital from March to April, 2016 were enrolled. The influenza A/B virus antigen detection kit (immunofluorescence assay) was used for influenza virus antigen detection. The children with positive results were given oseltamivir as the antiviral therapy and were asked to re-examine influenza virus antigen at 5, 5-7, and 7 days after onset.

RESULTSOf all children suspected of influenza, 560 (52.68%) had an influenza virus infection. A total of 215 children with influenza virus infection were followed up. The clearance rate of influenza virus antigen was 9.8% (21 cases) within 5 days after onset. The cumulative clearance rate of influenza virus antigen was 32.1% (69 cases) within 5-7 days, and 98.1% (211 cases) within 7-10 days after onset. Among these children, 6 children (2.8%) achieved the improvement in clinical symptoms within 3 days after onset. The cumulative rate of symptom improvement was 84.7% (182 cases) within 3-5 days after onset, and 100% achieved the improvement after 5 days of onset.

CONCLUSIONSThe time to improvement in symptoms after treatment is earlier than antigen clearance time. Almost all of the children achieve influenza virus antigen clearance 7-10 days after onset. Therefore, it is relatively safe for children to go back to school within 7-10 days after onset when symptoms disappear.

Antigens, Viral ; blood ; Child ; Child, Preschool ; Female ; Fluorescent Antibody Technique ; Humans ; Infant ; Influenza A virus ; immunology ; Influenza B virus ; immunology ; Male ; Time Factors