Objective: To summarize the point selection pattern and treatment method in acupuncture-moxibustion for dyspepsia through data mining of the related clinical literatures in recent two decades, and to provide reference for clinical application. Methods: With data mining technology, clinical literatures related to acupuncture-moxibustion for dyspepsia published between January 1997 and July 2018 were collected from major Chinese databases, and the treatment methods, point and meridian frequencies were summarized and analyzed. Results: A total of 106 studies were included. For meridians, the top 5 meridians used were the Stomach Meridian, Conception Vessel, Spleen Meridian, Liver Meridian and Pericardium Meridian. For point selection, the leading 5 points were Zusanli (ST 36), Zhongwan (CV 12), Shangwan (CV 13), Xiawan (CV 10) and Sanyinjiao (SP 6). For major and adjunct points, the 5 most significant major points were Zusanli (ST 36), Zhongwan (CV 12), Neiguan (PC 6), Sanyinjiao (SP 6) and Shangwan (CV 13); the 5 most significant adjunct points were Neiting (ST 44), Qihai (CV 6), Fenglong (ST 40), Yinlingquan (SP 9) and Tianshu (ST 25). For treatment method, the top 3 methods used were moxibustion alone, acupuncture alone and acupuncture combined with medicinal herbs. Conclusion: The main meridian chosen in acupuncture-moxibustion for dyspepsia was the Stomach Meridian, and the points were mainly selected from the Stomach Meridian; treatment method was moxibustion alone, which may provide reference for clinical treatment of this disease.

Objective Medical statistics is an important tool in scientific research and practice.The article was to evaluate the current knowledge, learning needs and related influencing factors of medical statistics among medical doctoral students to provide references for the optimization in the teaching mode of medical statistics. Methods A questionnaire was used to investigate Grade 2014 doctoral students who took medical statistics course before and after the teaching in a medical university. Results The knowl-edge of doctoral students were at different levels and they had different learning requirements.More than 81.4% of the respondents have difficulty in the choice of scientific and reasonable design and the scientific design.Over 50%students had insufficient knowledge of advanced statistics and poor software application ability.They had the demands for more practical cases explanation in theory course, more software teaching hours and some short term specialized courses. Conclusion The university and teachers should carry out teaching reform according to the particularity of doctoral students and teach in small sections according to their knowledge levels of sta-tistics and learning requirements.It is suggested that the teaching should be combined with the students'own research projects in order to improve the teaching effect and improve the students'ability in sta-tistical design and solving the practical problem in scientific research statistics.

Titanium and titanium alloys,which are bio-inert materials and have excellent mechanical properties,have broad applications in clinic.On the one hand,TiO2 nanotube can effectively enhance the osteogenic differentiation of bone marrow mesenchymal stem cells and have antimicrobial abilities in some extent;On the other hand,TiO2 nanotube,an outstanding drug-carrier,could effectively prevent and treat bone implant-related infection by loading antimicrobial agents.By means of modifying the nanotube coating,improving the efficiency of drug loading and ameliorating release profile,the ideal antimicrobial property could be achieved.Strategies for drug release can be divided into two approaches,namely mechanical release and intellectual release.Mechanical release could fortify the antibacterial ability of coating,but the unicity and uncontrollability of agents diluting need to be resolved.By contrast,intellectual agents release has the advantages of multiple drug species,controllable release volume and programmed trigger condition.This article reviews the current and potential methods of antibacterial substances loading and release from TiO2 nanotube,and expects to provide the orientation for future direction of controllable and intellectual nanotube drug release.

Objective: To clinically evaluate the efficacy of electrolyzed oxidizing water (EOW) as a root canal irrigation solution on disinfecting bacteria and removing the smear-layer to keep the non-bacterium state in the root canal. Methods: In the first experiment, 108 single-rooted teeth that needed root canal treatment were randomly divided into two groups. EOW was used as the root canal irrigation solution in the experimental group while 30 ml/L H2O2, saline solution, and 75 g/L EDTA solution were used as controls. Bacteriological examinations were conducted from each tooth before and after treatment with the root canal irrigation solutions. In the second experiment, the 20 fresh human extracted teeth were divided into two groups and treated as same as the first experiment in root canal preparation and irrigation. After irrigation, the apical canal wall was observed using SEM. Results: There was no significant difference in bacterial growth and removing the smear layer between the group using EOW and that using saline solution, 30 ml/L H2O2 and 75 g/L EDTA solution. Conclusion:The results indicate EOW is useful as a clinical root canal irrigation solution.

Objective To repair the experimental femoral head necrosis with the implantation of tricalcium phosphate (TCP) loaded with human bone morphogenetic protein-2(hBMP-2) gene transfected bone marrow derived mesenchymal stem cells(BMSCs). Methods Established the animal models of femoral head necrosis in 22 goats by the ligation of the lateral and medial circumflex femoral arteries and delivery of liquid nitrogen into femoral head. 4 goats served as the control group without any treatment. 3 weeks after surgery, necrotic bone in the other 18 goats were removed and TCP loaded gene transfer cells were implanted into the femoral head with BMP-2 gene transfected BMSCs in right side and ?-gal gene transfected BMSCs in left side. BMP-2 concentrations in femoral head were tested by the ELISA at 1st, 2nd, 3rd week after implantation. Histological observation was done before and at 6th, 10th, 16th week after implantation. New bone volumes (NBV) were measured at 16th week after implantation by the histomorphometry method. X-ray was taken at 16th week after operation in untreated group and after treatment in BMP-2 group and ?-gal group. Results The concentration of BMP-2 in femoral head of BMP-2 group was higher than that of ?-gal group at different time point. Empty lacunae and fibrotic marrow were demonstrated before implantation. New bone was evident in the implantation field of BMP-2 group while fibrous tissues were evident in that of ?-gal group at 6th, 10th and 16th week after treatment. Histomorphology analysis indicated that the NBV in BMP-2 group was significantly higher than that in ?-gal group. Articular surface collapse were observed in the X-ray photograph of untreated group. Regular shape and normal density of femoral head in BMP-2 group compared with the irregular shape and low density of femoral head in ?-gal group could be demonstrated in the X-ray photograph 16 weeks after treatment. Conclusion Implantation of the TCP loaded with human BMP-2 gene transfected BMSCs could repair early-stage experimental femoral head necrosis.

Objective To quantify the EEG data in patients with brain death, expecting to obtain a criteria with high sensitivity and specificity for the diagnosis of brain death. Methods Analyzed the EEG data obtained from 17 brain dead cases and 5 clinical brain dead cases with spectrum analysis and made comparison with that from 13 non-brain dead cases. Results The EEG electric power of the brain dead group was significantly lower than that of non-brain dead group (P

Adult ; Altitude ; Chordoma ; surgery ; Endoscopy ; Female ; Humans ; Nasal Cavity ; surgery ; Paranasal Sinuses ; surgery ; Skull Base ; surgery ; Video-Assisted Surgery

Manganese peroxidase (MnP), a crucial enzyme in lignin degradation, has wide potential applications in environmental protection. However, large-scale industrial application of this enzyme is limited due to several factors primarily related to cost and availability. Special attention has been paid to the production of MnP from inexpensive sources, such as lignocellulosic residues, using solid-state fermentation (SSF) systems. In the present study, a suitable SSF medium for the production of MnP by Schizophyllum sp. F17 from agro-industrial residues has been optimized. The mixed solid medium, comprising pine sawdust, rice straw, and soybean powder at a ratio of 0.52:0.15:0.33, conferred a maximum enzyme activity of 11.18 U/g on the sixth day of SSF. The results show that the use of wastes such as pine sawdust and rice straw makes the enzyme production more economical as well as helps solve environmental problems.
Culture Media ; Fermentation ; Industrial Microbiology ; methods ; Oryza ; Peroxidases ; biosynthesis ; Schizophyllum ; enzymology ; Wood

A PCR method was used to amplify the sequence encoding the mature peptide of?-mannanase of Bacillus subtilis. The gene was inserted into the Pichia pastoris vector pPIC9K, downstream of?-factor signal peptide sequence. The resultant recombinant plasmid pPIC9K-MAN was lineared by BglII digestion and introduced into the host Pichia pastoris GS115 by PEG method. After screen, the recombinant P. pastoris strain MAN22 was obtained and fermented in large scale 5L fermenter. The recombinant mannanase activity could reach to 1102IU/ml. The properties of the recombinant mannanase were characterized.

Objective To obtain recombinant human Smith D1 (Sm D1) antigen and establish detecting assay.Methods Human Smith D1 antigen was synthesized by PCR using human Leukemic cDNA. The prokaryotic expression vector pGEX-ST-Sm D1 was constructed and transformed into E.coli.BL21 cell.Protein expressed under the induction of IPTG.We established DIGFA for detecting anti-Sm D1 antibodies with purified Sm D1 antigens.Results Sequence and restriction analysis revealed Sm D1 gene was cloned in frame into pGEX-5T,SDS-PAGE profile showed a clear protein band with a relative molecular weight of 39 000 and western blotting indicated that the expressed product specifically reacted to polyclonal anti-human Sm D1 genes.There was no significant difference between DIGFA and IB.The agreement between DIGFA and IB was 91.7% as calculated by Kappa statistical method.The sensitivity and specificity of DIGFA were 100% and 83.3% repectively.Conclusions Human Sm D1 gene is successfully cloned、 expressed and purification.The DIGFA,using purified Sm D1 antigens,is as good as IB,rather simpler, more rapid and reliable assay.