Objective To explore the clinical features of occupational pneumoconiosis (hereinafter referred to as “pneumoconiosis”) complicated with interstitial lung disease (ILD). Methods A total of 56 patients with pneumoconiosis complicated with ILD were selected as the research subjects using a retrospective study method, and their clinical features were analyzed. Results The main clinical symptoms of the 56 patients were progressive dyspnea, cough, and expectoration, with detection rates of 76.8%, 75.0%, and 55.4%, respectively. The detection rates of hypoxemia and respiratory failure were 67.9% and 32.1% respectively. Among the 35 patients who underwent pulmonary function test, restrictive, mixed, and obstructive ventilatory disorders were detected in 37.1%, 22.9%, and 17.1% of cases, respectively, with a 74.3% detection rate for reduced diffusion capacity. High resolution computed tomography of the chest revealed ground-glass shadows, grid shadow, interlobular thickening, honeycomb shadows and tractive bronchiectasis, with detection rates of 57.1%, 35.7%, 35.7%, 23.2%, and 17.9%, respectively. Lesions were mostly diffusely distributed in both lungs, with a predominance in the lower lungs compared to the mid-upper lungs. Patients complicated with connective tissue disease, including systemic sclerosis, rheumatoid arthritis, systemic lupus erythematosus, polymyositis, and dermatomyositis, accounted for 33.9% (19 cases). Conclusion The clinical symptoms, pulmonary function, and arterial blood gas analysis results of patients with pneumoconiosis complicated with ILD show no specific features. However, a subset of pneumoconiosis patients with ILD also have coexisting connective tissue diseases.

Objective:To analyze the performance characteristics of the energy output of defibrillation device at different lifecycle stages of the equipment,and to improve the level of management,so as to ensure the safety and effectiveness of using the device.Methods:A total of 90 defibrillation devices of using 10 types included 861290 and CardioServ(included scrapped devices)during the period of 2015-2022 were retrospectively analyzed.The detected data of energy output of defibrillation device were analyzed as statistical method,and the error of releasing energy was calculated.A total of 36 defibrillation devices that were in the early stages of use(at the first three years of device use)were divided into the first year,the second year and the third year,and the data of energy outputs of devices among three years were compared.The data of the type A and type B defibrillation devices,which were the largest number of devices in the normal stage of use(the middle stage of use),were calibrated according to the energy release in the three years between 2018 and 2000.The difference of releasing energy at the preseted value of 100J between the two types of devices was analyzed.Finally,the errors of energy releases of 8 devices,which energy outputs exceeded the deadline,in the scrap period between 2015 and 2022 were summarized.Results:In the data of three groups of devices in the early stages of use,the differences at the first and second year of device use among 100J,150J and 200J of the energy releases of the preseted values were significant(t=-0.17,-0.17,-0.58,P>0.05).The difference of the measured values between the first and third years of device use was not significant(Z=-0.70,-0.38,-0.86,P>0.05).The results of variance analysis of repeated measurement of the energy releases of the devices in normal stage indicated that the difference of the energy release at 100J preseted point among different types of 41 devices was significant(F=4.40,P<0.05).The energy release of type X defibrillator appeared constantly high,and the relative error increased with the increasing of preseted values.The repeatability of the device was better,and the relationship between preseted energy(x)and release energy(y)conformed to linear relationship(R2=0.9985).In these defibrillation devices that were using,the qualified rate of energy output of>100J preseted point was 97.68%.Conclusion:There is slight difference in the mean value of energy release between different type of defibrillation devices within the qualified range,and the energy release still is a performance indicator that should be highly focused for defibrillation devices.We should combine with the maintenance and repair data of device to conduct in-depth analysis,so as to grasp the operating status of the device,and optimize the strategy of quality control,and ensure the safety of defibrillator in clinical use.

To explore the digital manufacturing process of distal extension removable partial denture. From November 2021 to December 2022, 12 patients (7 males and 5 females) with free-ending situation were selected from the Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University. Three-dimensional model of the relationship between alveolar ridge and jaw position was obtained by intraoral scanning technique. After routine design, manufacturing and try-in of metal framework for removable partial denture, the metal framework was located in the mouth and scanned again to obtain the composite model of dentition, alveolar ridge and metal framework. The free-end modified model is obtained by merging the digital model of free-end alveolar ridge with the virtual model with the metal framework. The three-dimensional model of artificial dentition, and base plate was designed on the free-end modified model, and the resin model were made by digital milling technology. The removable partial denture was made by accurately positioning the artificial dentition and base plate, bonding metal framework with injection resin, grinding and polishing the artificial dentition and resin base. Compared with the design data after clinical trial, the results showed that there was an error of 0.4-1.0 mm and an error of 0.03-0.10 mm in the connection between the resin base of artificial dentition and the connecting rod of the in-place bolt and the connection between artificial dentition and resin base. After denturen delivery, only 2 patients needed grinding adjustment in follow-up visit due to tenderness, and the rest patients did not find any discomfort. The digital fabrication process of removable partial denture used in this study can basically solve the problems of digital fabrication of free-end modified model and assembly of artificial dentition with resin base and metal framework.

Autologous ozonized blood transfusion(AOBT) is a therapy of re-transfusion of 100-200 mL of autologous blood after shaking and agitation with appropriate amount of oxygen-ozone in vitro. The oxidation of blood through the strong oxidation of ozone can enhance the non-specific immune response of the body, regulate the internal environment and promote health. This therapy has been increasingly applied in clinical practice, while no unified standard for the operation process in terms of ozone concentration, treatment frequency and treatment course had been established. This operation process of AOBT is primarily explored in order to standardize the operation process and ensure its safety and efficacy.

As intelligent production of traditional Chinese medicine （TCM） has been inevitable， informatization and automation of the production process have become the precondition for realizing intelligent manufacturing of TCM， of which the accumulation of critical material attribute and the critical quality attribute are the basis. The study of material properties is of great significance to achieve the quality control of the final product in the process， but there is a lack of systematic induction and summary of the research on the attribute of TCM pills. Therefore， the authors analyzed and summarized the attributes of raw materials， excipients and intermediates in the pill unit process according to the classification of powder properties， rheological properties and texture properties. What’s more， the impact of material attributes on the quality of the final product was summarized. Besides， this review summarized the attribute characterization techniques involved in the pill process and provided some suggestions for the characterization of product quality attributes. Finally， based on the concept of quality by design （QbD）， the authors proposed that the study of material attribute should be combined with process analytical technology （PAT）， and the focus of drug quality control should be moved forward to guide equipment upgrading， so as to realize intelligent continuous manufacturing of TCM pills.

The novel coronavirus disease (COVID-19) pandemic is emerging as a global health threat and shows a higher risk for men than women. Thus far, the studies on andrological consequences of COVID-19 are limited. To ascertain the consequences of COVID-19 on sperm parameters after recovery, we recruited 41 reproductive-aged male patients who had recovered from COVID-19, and analyzed their semen parameters and serum sex hormones at a median time of 56 days after hospital discharge. For longitudinal analysis, a second sampling was obtained from 22 of the 41 patients after a median time interval of 29 days from first sampling. Compared with controls who had not suffered from COVID-19, the total sperm count, sperm concentration, and percentages of motile and progressively motile spermatozoa in the patients were significantly lower at first sampling, while sperm vitality and morphology were not affected. The total sperm count, sperm concentration, and number of motile spermatozoa per ejaculate were significantly increased and the percentage of morphologically abnormal sperm was reduced at the second sampling compared with those at first in the 22 patients examined. Though there were higher prolactin and lower progesterone levels in patients at first sampling than those in controls, no significant alterations were detected for any sex hormones examined over time following COVID-19 recovery in the 22 patients. Although it should be interpreted carefully, these findings indicate an adverse but potentially reversible consequence of COVID-19 on sperm quality.
Adult ; Asthenozoospermia/virology* ; COVID-19/physiopathology* ; China ; Gonadal Steroid Hormones/blood* ; Humans ; Male ; Progesterone/blood* ; Prolactin/blood* ; SARS-CoV-2 ; Semen/physiology* ; Semen Analysis ; Sperm Count ; Sperm Motility ; Spermatozoa/physiology* ; Time Factors

Objective To study the changes of metabolites in serum and tissues （kidney, liver and heart） of mice died of acute tetracaine poisoning by metabolomics, to search for potential biomarkers and related metabolic pathways, and to provide new ideas for the identification of cause of death and research on toxicological mechanism of acute tetracaine poisoning. Methods Forty ICR mice were randomly divided into control group and acute tetracaine poisoning death group. The model of death from acute poisoning was established by intraperitoneal injection of tetracaine, and the metabolic profile of serum and tissues of mice was obtained by ultra-high performance liquid chromatography-electrostatic field orbitrap high resolution mass spectrometry （UPLC-Orbitrap HRMS）. Multivariate statistical principal component analysis （PCA） and orthogonal partial least square-discriminant analysis （OPLS-DA） were used, combined with t-test and fold change to identify the differential metabolites associated with death from acute tetracaine poisoning. Results Compared with the control group, the metabolic profiles of serum and tissues in the mice from acute tetracaine poisoning death group were significantly different. Eleven differential metabolites were identified in serum, including xanthine, spermine, 3-hydroxybutylamine, etc.; twenty-five differential metabolites were identified in liver, including adenylate, adenosine, citric acid, etc.; twelve differential metabolites were identified in heart, including hypoxanthine, guanine, guanosine, etc; four differential metabolites were identified in kidney, including taurochenodeoxycholic acid, 11, 12-epoxyeicosatrienoic acid, dimethylethanolamine and indole. Acute tetracaine poisoning mainly affected purine metabolism, tricarboxylic acid cycle, as well as metabolism of alanine, aspartic acid and glutamic acid. Conclusion The differential metabolites in serum and tissues of mice died of acute tetracaine poisoning are expected to be candidate biomarkers for this cause of death. The results can provide research basis for the mechanism and identification of acute tetracaine poisoning.
Animals ; Biomarkers/metabolism* ; Chromatography, High Pressure Liquid ; Mass Spectrometry ; Metabolome ; Metabolomics ; Mice ; Mice, Inbred ICR ; Tetracaine

Objective: Several COVID-19 patients have overlapping comorbidities. The independent role of each component contributing to the risk of COVID-19 is unknown, and how some non-cardiometabolic comorbidities affect the risk of COVID-19 remains unclear. Methods: A retrospective follow-up design was adopted. A total of 1,160 laboratory-confirmed patients were enrolled from nine provinces in China. Data on comorbidities were obtained from the patients' medical records. Multivariable logistic regression models were used to estimate the odds ratio ( Results: Overall, 158 (13.6%) patients were diagnosed with severe illness and 32 (2.7%) had unfavorable outcomes. Hypertension (2.87, 1.30-6.32), type 2 diabetes (T2DM) (3.57, 2.32-5.49), cardiovascular disease (CVD) (3.78, 1.81-7.89), fatty liver disease (7.53, 1.96-28.96), hyperlipidemia (2.15, 1.26-3.67), other lung diseases (6.00, 3.01-11.96), and electrolyte imbalance (10.40, 3.00-26.10) were independently linked to increased odds of being severely ill. T2DM (6.07, 2.89-12.75), CVD (8.47, 6.03-11.89), and electrolyte imbalance (19.44, 11.47-32.96) were also strong predictors of unfavorable outcomes. Women with comorbidities were more likely to have severe disease on admission (5.46, 3.25-9.19), while men with comorbidities were more likely to have unfavorable treatment outcomes (6.58, 1.46-29.64) within two weeks. Conclusion Besides hypertension, diabetes, and CVD, fatty liver disease, hyperlipidemia, other lung diseases, and electrolyte imbalance were independent risk factors for COVID-19 severity and poor treatment outcome. Women with comorbidities were more likely to have severe disease, while men with comorbidities were more likely to have unfavorable treatment outcomes.
Adult ; Aged ; COVID-19/virology* ; China/epidemiology* ; Comorbidity ; Female ; Humans ; Male ; Middle Aged ; Retrospective Studies ; Severity of Illness Index ; Treatment Outcome

Objective:To investigate the effect of microRNA-124 (miR-124) expression on pathological changes of Tau in elderly patients with Alzheimer disease to provide a new target for early detection and early treatment of Alzheimer disease in the elderly.Methods:The serum of 50 patients with Alzheimer disease from June 2017 to June 2018 in the Third People′s Hospital of Qinghai Province Hospital was taken as the sample of the research group and the serum of 50 healthy people was taken as the control sample. The mRNA expression of miR-124 in serum was determined by real-time polymerase chain reaction. The double antibody sandwich enzyme-linked immunosorbent assay was used. The expression levels of Tau protein and phosphorylated Tau (PTau) protein (S396, T181 and T231) were examined; pathological changes of Tau protein were detected by positron emission tomography.Results:The mRNA expression of serum miR-124 in Alzheimer disease patients was significantly higher than that in the control group (6.91 ± 0.41 vs. 5.11 ± 0.37, P < 0.01). The expression levels of total Tau protein, PTau (S396) protein and PTau (T181) protein in Alzheimer disease patients was significantly up-regulated, compared with those of the control group: (195.16 ± 20.48) ng/L vs. (123.25 ± 20.26) ng/L, (69.35 ± 8.92) ng/L vs. (40.53 ± 4.36) ng/L, (66.83 ± 8.45) ng/L vs. (35.87 ± 2.18) ng/L, P < 0.05. The pathological changes of Tau protein were clinically manifested as brain deposition, and the main parts were frontal lobe, occipital lobe, parietal lobe and temporal lobe. The overexpression of miR-124 was positively correlated with high expression of PTau (S396), high expression of PTau (T181) and high expression of total Tau, and it was an independent influencing factor. Conclusions:Overexpression of miR-124 can promote the expression of total Tau protein and phosphorylation of Tau protein, which is clinically indicative of Tau protein deposition in the brain of Alzheimer disease patients. It is expected to be a prognostic biomarker for Alzheimer disease.

· AIM:To investigate the prevalence and related factors of dry eye in primary school pupils in Lanzhou,Gansu Province.· METHODS:From October to November 2016,1347 pupils in two primary schools in Lanzhou,Gansu Province,were randomly selected as subjects.Every pupil was carried on the questionnaire of dry eye and eye inspection to confirm the diagnosis of dry eye.Besides,the prevalence and influencing factors of dry eye in pupils were analyzed by chi-square test,Mann-Whitney U test and logistic regression model.· RESULTS:A total of 1 268 pupils took part in this study and the inclusion ratio was 94.14％;271 individuals were diagnosed as dry eye,and the prevalence rate was 21.37％.Statistical analysis showed that the risk factors of dry eye were male,senior pupils,often using eye drops,poor reading habits,wearing contact lenses,video terminals last for a long time,learning pressure.· CONCLUSION:Dry eye has become one of the main diseases that plagued pupil's life and learning.It should cause wide attention.Considering the above factors,rational use of eye and improve lifestyle will help to reduce the damage to eye of pupils.