1.Regulation of Hypothalamo-Pituitary-Gonadal Axis.
Journal of Korean Society of Pediatric Endocrinology 2002;7(1):10-20
No abstract available.
Axis, Cervical Vertebra*
2.Buckling resistance, bending stiffness, and torsional resistance of various instruments for canal exploration and glide path preparation.
Sang Won KWAK ; Jung Hong HA ; Woocheol LEE ; Sung Kyo KIM ; Hyeon Cheol KIM
Restorative Dentistry & Endodontics 2014;39(4):270-275
OBJECTIVES: This study compared the mechanical properties of various instruments for canal exploration and glide-path preparations. MATERIALS AND METHODS: The buckling resistance, bending stiffness, ultimate torsional strength, and fracture angle under torsional load were compared for C+ file (CP, Dentsply Maillefer), M access K-file (MA, Dentsply Maillefer), Mani K-file (MN, Mani), and NiTiFlex K-file (NT, Dentsply Maillefer). The files of ISO size #15 and a shaft length of 25 mm were selected. For measuring buckling resistance (n = 10), the files were loaded in the axial direction of the shaft, and the maximum load was measured during the files' deflection. The files (n = 10) were fixed at 3-mm from the tip and then bent 45degrees with respect to their long axis, while the bending force was recorded by a load cell. For measuring the torsional properties, the files (n = 10) were also fixed at 3-mm, and clockwise rotations (2-rpm) were applied to the files in a straight state. The torsional load and the distortion angle were recorded until the files succumbed to the torque. RESULTS: The CP was shown to require the highest load to buckle and bend the files, and the NT showed the least. While MA and MN showed similar buckling resistances, MN showed higher bending stiffness than MA. The NT had the lowest bending stiffness and ultimate torsional strength (p < 0.05). CONCLUSIONS: The tested instruments showed different mechanical properties depending on the evaluated parameters. CP and NT files were revealed to be the stiffest and the most flexible instruments, respectively.
Axis, Cervical Vertebra
;
Torque
3.Influence of Gut Microbes on the Brain-Gut Axis (Gut 2011;60:307-317).
Yeong Yeh LEE ; Andrew Seng CHUA
Journal of Neurogastroenterology and Motility 2011;17(4):427-429
No abstract available.
Axis, Cervical Vertebra
4.Three-dimensional accuracy of different correction methods for cast implant bars.
Ji Yung KWON ; Chang Whe KIM ; Young Jun LIM ; Ho Beom KWON ; Myung Joo KIM
The Journal of Advanced Prosthodontics 2014;6(1):39-45
PURPOSE: The aim of the present study was to evaluate the accuracy of three techniques for correction of cast implant bars. MATERIALS AND METHODS: Thirty cast implant bars were fabricated on a metal master model. All cast implant bars were sectioned at 5 mm from the left gold cylinder using a disk of 0.3 mm thickness, and then each group of ten specimens was corrected by gas-air torch soldering, laser welding, and additional casting technique. Three dimensional evaluation including horizontal, vertical, and twisting measurements was based on measurement and comparison of (1) gap distances of the right abutment replica-gold cylinder interface at buccal, distal, lingual side, (2) changes of bar length, and (3) axis angle changes of the right gold cylinders at the step of the post-correction measurements on the three groups with a contact and non-contact coordinate measuring machine. One-way analysis of variance (ANOVA) and paired t-test were performed at the significance level of 5%. RESULTS: Gap distances of the cast implant bars after correction procedure showed no statistically significant difference among groups. Changes in bar length between pre-casting and post-correction measurement were statistically significance among groups. Axis angle changes of the right gold cylinders were not statistically significance among groups. CONCLUSION: There was no statistical significance among three techniques in horizontal, vertical and axial errors. But, gas-air torch soldering technique showed the most consistent and accurate trend in the correction of implant bar error. However, Laser welding technique, showed a large mean and standard deviation in vertical and twisting measurement and might be technique-sensitive method.
Axis, Cervical Vertebra
;
Welding
5.An evaluation of angles between the alveolar crest bone and the implant effect on the implant crestal area induced stresses using a finite element method.
Sung Bum CHO ; Kyu Bok LEE ; Kwang Hun JO
The Journal of Korean Academy of Prosthodontics 2007;45(2):274-282
STATEMENT OF PROBLEM: Main consideration was given to the stresses at the site of implant entry into the cortical bone at the alveolar crest. As a suspectible factor affecting the occurrence of stress concentrations, the contact angle between the implant and the alveolar crest bone was addressed. PURPOSE: The purpose of this study is to evaluate angles between the alveolar crest bone and the implant effect on the implant crestal area induced stresses using a finite element method. MATERIAL AND METHODS: Cylindrically shaped, standard size ITI implants entering into alveolar crest with four different contact angles of 0, 15, 30, and 45 deg. with the long axis of the implant were axisymmetrically modelled. Alterations of stresses around the implants were computed and compared at the cervical cortical bone. RESULTS AND CONCLUSION: The results demonstrated that regardless of the difference of the implant/alveolar crest bone contact angles, stress concentration occurred at the cervical bone and the angle differences led to insignificant variations in stress level.
Axis, Cervical Vertebra
6.Dosimetric Characteristics of Dual Photon Energy UsingIndependent Collimator Jaws.
Journal of the Korean Society for Therapeutic Radiology 1996;14(3):237-246
PURPOSE: The accurate dosimerty of independent collimator equipped for 6MV and 15MV X-ray beam was investigated to search for the optimal correction factor. METHODS AND MATERIALS: The field size factors, beam quality and dose distribution were measured by using 6MV, 15MV X-ray. Field size factors were measured from 3X3cm2 to 35X35cm2 by using 0.6cc ion chamber (NE 2571) at Dmax. Beam qualities were measured at different field sizes, off-axis distances and depths. Isodose distributions at different off-axis distance using 10X10cm field were also investigated and compared with symmetric field. RESULTS: 1) Relative field size factors was different along lateral distance with maximum changes in 3.1% for 6MV and 5% for 15MV. But the field size factors of asymmetric fields were identical to the modified central-axis values in symmetric fileld, which corrected by off-axis ratio at Dmax.2) The HVL and PDD was decreased by increasing off-axis distance. PDD was also decreased by increasing depth For field size more than 5X5cm2 and depth less than 15cm, PDD of asymmetric field differs from that of symmetric one (0.5~2% for 6MV and 0.4~1.4% for 15MV).3) The measured isodose curves demonstrate divergence effects and reduced doses adjacent to the edge close to the flattening filter center was also observed. CONCLUSION: When asymmetric collimator is used, calcutation of MU must be corrected with off-axis and PDD with a caution of underdose in central axis.
Axis, Cervical Vertebra
;
Jaw*
7.Erosion of the transverse foramina of Korean axis.
Byoung Young CHOI ; Hye Yeon LEE ; In Hyuk CHUNG
Korean Journal of Physical Anthropology 1993;6(2):239-248
No abstract available.
Axis, Cervical Vertebra*
8.A Study on the Effects of Wedge Filter in Peripheral Dose Distribution.
Wee Saing KANG ; Il Han KIM ; Charn Il PARK
Journal of the Korean Society for Therapeutic Radiology 1985;3(2):145-152
The peripheral dose distributions of wedge fields of Co-0 gamma-ay and 10MV x-ay were measured by the solid state detector controlled by means of semiautomatic water phentom system. The measurements were made on the principal plane parallel to the cross section of wedge filter (blade and ridge direction). For parallel motion of the detector to the beam axis the distance from the margin of radiation field at surface were 3, 5 and 10cm. For tranverse motion the depth of measurement were dm, 5, 10 and 15cm. The followings were drawn from the measurement. 1. The peripheral dose of the blade side of wedges was generally higher than that of the ridge side at symmetric point about beam axis. 2. In the superficial region phenomena of dose build-p appeared. 3. For Co-0 gamma-ay field, the peripheral dose did not monotonously decrease with the distance from the field margin but increase in some range, consequently showing a peak dose. 4. The peripheral dose did not only depend on radiation quality and field size, but also on wedge angle and wedge direction.
Axis, Cervical Vertebra
;
Water
9.Seohan Computerized Hue Test(2): Total Error Scores According to the Age in Normal Subjects and Total Error Scores and Central Cap in Color Defectives.
Minseop KIM ; Jeong Min HWANG ; Won Ryang WEE ; Jin Hak LEE ; Kun LEE ; In Bum LEE
Journal of the Korean Ophthalmological Society 2001;42(3):453-458
PURPOSE: To evaluate the clinical usefulness and its own characteristic of Seohan computerized 85-hue test(SCHT-85) which was developed by authors. METHODS: SCHT-85 was performed in 89 normal subjects and 41 subjects with color defects diagnosed by Hardy-Rand-Rittler test(HRR test) and Farnsworth Munsell 100-hue test(FM 100-hue test) and total error scores(TES) according to the age in normal subjects and TES and central cap in subjects with color defects were determined. RESULTS: In normal subjects, TES of SCHT-85 according to the age were slightly higher than those of FM 100-hue test and highly correlated with those of FM 100-hue test. TES of SCHT-85 were increased according to the degree of abnormality in the HRR test in subjects with color defects. TES of SCHT-85 were lower than those of FM 100-hue test in normal subjects and higher than those of FM 100-hue test in subjects with color defects. In subjects with color defects, the central cap of SCHT-80 showed the tendency to yellowgreen-purple axis in protan and green-bluepurple axis in deutan compared to that of FM 100-hue test. CONCLUSIONS: SCHT-85 is highly correlated with FM 100-hue test and seems to be more useful to differentiate normal subjects and subjects with color defects than FM 100-hue test.
Axis, Cervical Vertebra
10.Spondylolysis of the axis: report of one case.
Chang Uk CHOI ; Yeon Il KIM ; Byung Joon SHIN ; Yoo Sung SEO ; Yak Soo EUN
The Journal of the Korean Orthopaedic Association 1991;26(3):1032-1035
No abstract available.
Axis, Cervical Vertebra*
;
Spondylolysis*