OBJECTIVES: This study was aimed to examine the patients' perception and satisfaction with the results of endodontic microsurgery which was apicoectomy with retrofilling. MATERIALS AND METHODS: A questionnaire was given to 109 patients, who were recalled after a minimum of 3 months upon endodontic microsurgery in the Department of Conservative Dentistry, Yonsei University. A contingency table and correlation analysis were used to determine if there were any correlations between age/gender and the patients' responses (p = 0.05). RESULTS: Approximately 60% of respondents answered they had never heard of surgical endodontic procedures. 63.3% of respondents chose the surgical option because they wanted to keep their natural teeth. If the patient required the same procedure on another tooth later, 100 out of 109 respondents answered they would choose microsurgery instead of extraction. Most patients (82.57%) appeared to be satisfied with the surgical procedure. CONCLUSIONS: Endodontic microsurgery consisting of apicoectomy and retrofilling seems to appeal to majority of patients as a satisfactory and valuable treatment choice.
Apicoectomy ; Surveys and Questionnaires ; Dentistry ; Humans ; Microsurgery ; Tooth

The purpose of this study was to evaluate the apical sealing ability of Super-EBA, MTA and Dyract-flow as retrofilling materials. Forty-eight extracted human teeth with straight and single root canal were used in this study. The root canals were prepared to a #40 apical canal size and obturated with gutter-percha. Apicoectomies were performed and root end cavities were prepared to a depth of 3mm using an ultrasonic device. The root end cavities were filled with Super-EBA, MTA or Dyract-flow. Leakage was measured using an electrochemical technique for 4 weeks. According to this study, the results were as follows. 1. Increasing leakage with time was observed in all groups. 2. No significant difference was noted among the 3 groups with time (p = 0.216). 3. No significant difference was noted among the 3 groups when measured within the same time interval (p = 0.814). The results of this study suggest that the sealing ability of Dyract-flow is equal to that of Super-EBA and MTA, and Dyract-flow may be an alternative to other materials for root-end filling.
Apicoectomy ; Dental Pulp Cavity ; Electrochemical Techniques ; Humans ; Tooth ; Ultrasonics ; Pemetrexed

OBJECTIVES: The purpose of this study was to evaluate the proximity of the mandibular molar apex to the buccal bone surface in order to provide anatomic information for apical surgery. MATERIALS AND METHODS: Cone-beam computed tomography (CBCT) images of 127 mandibular first molars and 153 mandibular second molars were analyzed from 160 patients' records. The distance was measured from the buccal bone surface to the root apex and the apical 3.0 mm on the cross-sectional view of CBCT. RESULTS: The second molar apex and apical 3 mm were located significantly deeper relative to the buccal bone surface compared with the first molar (p < 0.01). For the mandibular second molars, the distance from the buccal bone surface to the root apex was significantly shorter in patients over 70 years of age (p < 0.05). Furthermore, this distance was significantly shorter when the first molar was missing compared to nonmissing cases (p < 0.05). For the mandibular first molars, the distance to the distal root apex of one distal-rooted tooth was significantly greater than the distance to the disto-buccal root apex (p < 0.01). In mandibular second molar, the distance to the apex of C-shaped roots was significantly greater than the distance to the mesial root apex of non-C-shaped roots (p < 0.01). CONCLUSIONS: For apical surgery in mandibular molars, the distance from the buccal bone surface to the apex and apical 3 mm is significantly affected by the location, patient age, an adjacent missing anterior tooth, and root configuration.
Apicoectomy ; Cone-Beam Computed Tomography ; Humans ; Molar* ; Tooth

Two case reports describing a new technique of creating a repositionable piezoelectric bony window osteotomy during apicoectomy in order to preserve bone and act as an autologous graft for the surgical site are described. Endodontic microsurgery of anterior teeth with an intact cortical plate and large periapical lesion generally involves removal of a significant amount of healthy bone in order to enucleate the diseased tissue and manage root ends. In the reported cases, apicoectomy was performed on the lateral incisors of two patients. A piezoelectric device was used to create and elevate a bony window at the surgical site, instead of drilling and destroying bone while making an osteotomy with conventional burs. Routine microsurgical procedures - lesion enucleation, root-end resection, and filling - were carried out through this window preparation. The bony window was repositioned to the original site and the soft tissue sutured. The cases were re-evaluated clinically and radiographically after a period of 12 - 24 months. At follow-up, radiographic healing was observed. No additional grafting material was needed despite the extent of the lesions. The indication for this procedure is when teeth present with an intact or near-intact buccal cortical plate and a large apical lesion to preserve the bone and use it as an autologous graft.
Apicoectomy* ; Cerebral Cortex ; Follow-Up Studies ; Humans ; Incisor ; Microsurgery ; Osteotomy* ; Tooth* ; Transplants

The chronic paranasal sinusitis are caused by various orign such as dental, general and anatomic problem. Among them, the odontogenic maxillary sinusitis which concerned by cral & maxillofacial surgeon have been treated by medicine, conservative treatment such as endodontic treatment, and Caldwell-Luc operation. But, New technique, so called Functional Endoscopic Sinus Surgery, have recently been performed in the ENT dept. This technique have the mechanism that widening maxillary ostium through removal of involved nasal mucosa and adjacent tissue accelerates adequate drainage and regeneration of normal mucosa and have merits such as minimum morbidity and complication. So, we would report one case, 22 years old female, of 3 patents who were diagnosed as odontogenic maxillary sinusitis and treated by Functional Endoscopic Sinus Surgery and Apicoectomy, and had good results.
Apicoectomy ; Drainage ; Female ; Humans ; Maxillary Sinus* ; Maxillary Sinusitis* ; Mucous Membrane ; Nasal Mucosa ; Regeneration ; Sinusitis ; Young Adult

In current endodontic practice, introduction of operating microscope, ultrasonic instruments, and microinstruments has induced a big change in the field of surgical retreatment. In this study, we aimed to offer key steps of endodontic microsurgery procedure compared with traditional root-end surgery, and to evaluate factors influencing success and failure based on published articles. Endodontic microsurgery is a surgical procedure performed with the aid of a microscope, ultrasonic instruments and modern microsurgical instruments. The microscope provides magnification and illumination - essential for identifying minute details of the apical anatomy. Ultrasonic instruments facilitate the precise root-end preparation that is within the anatomical space of the canal. Modern endodontics can therefore be performed with precision and predictability, thus eliminating the disadvantages inherent in traditional periapical surgery such as large osteotomy, beveled apicoectomy, inaccurate root-end preparation and the inability to observe isthmus. Factors influencing the outcomes of endodontic microsurgery may be diverse, but standardization of procedures can minimize its range. Among patient and tooth-related factors, periodontal status and tooth position are known to be prognostic, but there are only few articles concerning this matter. High-evidence randomized clinical trials or prospective cohort studies are needed to confirm these findings.
Apicoectomy ; Cohort Studies ; Endodontics ; Humans ; Lighting ; Microsurgery ; Osteotomy ; Retreatment ; Tooth ; Ultrasonics

We report a case of large radicular cyst progression related to endodontic origin to emphasize proper intervention and follow-up for endodontic pathosis. A 25 yr old man presented with an endodontically treated molar with radiolucency. He denied any intervention because of a lack of discomfort. Five years later, the patient returned. The previous periapical lesion had drastically enlarged and involved two adjacent teeth. Cystic lesion removal and apicoectomy were performed on the tooth. Histopathological analysis revealed that the lesion was an inflammatory radicular cyst. The patient did not report any discomfort except for moderate swelling 3 days after the surgical procedure. Although the patient had been asymptomatic, close follow-ups are critical to determine if any periapical lesions persist after root canal treatment.
Apicoectomy ; Dental Pulp Cavity ; Follow-Up Studies ; Humans ; Molar ; Radicular Cyst* ; Tooth

OBJECTIVES: Various bone graft substitute materials are used to enhance bone regeneration in the maxillofacial skeleton. In the recent past, synthetic graft materials have been produced using various synthetic and natural calcium precursors. Very recently, eggshell-derived hydroxyapatite (EHA) has been evaluated as a synthetic bone graft substitute. To assess bone regeneration using EHA in cystic and/or apicectomy defects of the jaws through clinical and radiographic evaluations. MATERIALS AND METHODS: A total of 20 patients were enrolled in the study protocol (CTRI/2014/12/005340) and were followed up at 4, 8, 12, and 24 weeks to assess the amount of osseous fill through digital radiographs/cone-beam computed tomography along with clinical parameters and complications. Wilcoxon matched pairs test, means, percentages and standard deviations were used for the statistical analysis. RESULTS: The sizes of the lesions in the study ranged from 1 to 4 cm and involved one to four teeth. The study showed significant changes in the formation of bone, the merging of material and the surgical site margins from the first week to the first month in all patients (age range, 15-50 years) irrespective of the size of the lesions and the number of teeth involved. Bone formation was statistically significant from the fourth to the eighth week, and the trabecular pattern was observed by the end of 12 weeks with uneventful wound healing. CONCLUSION: EHA showed enhancement of bone regeneration, and healing was complete by the end of 12 weeks with a trabecular pattern in all patients irrespective of the size of the lesion involved. The study showed enhancement of bone regeneration in the early bone formative stage within 12 weeks after grafting. EHA is cost effective and production is environment friendly with no disease transfer risks. Thus, natural bioceramics will play an important role in the reduction of costs involved in grafting and reconstruction.
Apicoectomy ; Bone Regeneration ; Calcium ; Durapatite ; Humans ; Jaw ; Osteogenesis ; Skeleton ; Tooth ; Transplants ; Wound Healing

OBJECTIVE: To establish an apicoectomy guide template design and manufacturing method, based on multi-source data fusion, computer aided design (CAD) and fused deposition modeling (FDM). The feasibility of the guide template was preliminary evaluated by the in vitro model experiment. METHODS: An extracted upper anterior tooth, after root canal treatment, was optical scanned, after which the extracted upper anterior tooth was poured in an apicoectomy plaster model. Cone-beam computed tomography (CBCT) scanning of the apicoectomy plaster model was performed, after which optical scanning of the plaster model for apical resection surgery was carried out. All of the relevant CBCT and optical scanning data of the extracted upper anterior tooth and the apicoectomy plaster model were introduced into the Geomagic Studio 2012 software. The multi-source data fusion technology was used to virtually simulate the three-dimensional positional relationship of the extracted tooth, the dentition, the alveolar bone and the gingival, based on which, the three-dimensional design of the apicoectomy guide template was completed in the Geomagic Studio 2012 software. With the technology of fused deposition modeling, the apical resection surgical guide template was three-dimensionally printed with the material of polylactic acid (PLA). Under the guidance of the surgical guide template, the root apical resection was performed on the plaster model. After the apicoectomy, the extracted upper anterior tooth was taken off from the apicoectomy plaster model and then was given the optical scanning. The apical resection length and angle were calculated by the function of distance measurement and angle measurement, and the results were compared with the preset values. RESULTS: The length of the apical resection was 2.88 mm along the direction of the long axis of the tooth, which was 0.12 mm lower than the preset 3 mm. The included angle between the apical resection plane and the long axis of the tooth was 77.9°, 12.1° lower than the preset 90°. CONCLUSION This study successfully established a digital design and production method of apicoectomy guide template by combing the multi-source data fusion, CAD and FDM technology. The design route and the production method are feasible. The study will provide a technology and methodology reference for the development of domestic special software for the digital design of apicoectomy guide template.
Apicoectomy/methods* ; Computer-Aided Design ; Cone-Beam Computed Tomography ; Printing, Three-Dimensional ; Software

This case report demonstrates an unnecessary endodontic treatment of teeth with florid cemento-osseous dysplasia (FCOD) due to a misdiagnosis as periapical pathosis and emphasizes the importance of correct diagnosis to avoid unnecessary treatment. A 30-year-old woman was referred to our institution for apicoectomies of the mandibular left canine and both the lateral incisors. The periapical lesions associated with these teeth had failed to resolve after root canal treatment over a 3-year period. Radiographic examinations revealed multiple lesions on the right canine, the second premolar, and both first molars as well as the anterior region of the mandible. Based on clinical, radiographic and histological evaluations, the patient condition was diagnosed as FCOD. The patient has been monitored for 2 years. To avoid unnecessary invasive treatment, accurate diagnosis is essential before treatment is carried out in managing FCOD.
Apicoectomy ; Bicuspid ; Dental Pulp Cavity ; Diagnostic Errors ; Female ; Fibrous Dysplasia of Bone ; Humans ; Incisor ; Mandible ; Molar ; Osteomyelitis ; Periapical Diseases ; Tooth