ABSTRACT Orthodontic treatments have been described as a risk factor for the development of gingival recessions. This descriptive and cross-sectional study was performed to evaluate the alveolar bone morphotype of the upper and lower anterior of 33 orthodontic treatment of candidate patients. The images were obtained from a high-resolution cone beam computerised tomography. Then, the thickness of the alveolar bone plate of teeth was measured in six levels, recording the presence of dehiscences and fenestrations. A total of 2,334 sites were evaluated. The average thickness of the maxillary alveolar bone at the buccal surface was 0.70, 0.62 and 1.43 mm at the cervical, middle and apical levels, respectively, while in the mandibular teeth it was 0.53, 0.50 and 2.96 mm. At the palatal and lingual surfaces, the bone was thicker than the buccal except at the apical level of the mandible. Most of the examined sites were measured less than 1 mm (n = 1,235, 52.9%), associated with high prevalence of bone dehiscences (57.6%) and fenestrations (33.3%), particularly in skeletal Class III patients. The observed bone morphotype involved a high vulnerability to bone resorption, and the subsequent gingival recession occurrence, face to orthodontic movements.
Alveolar Bone Loss ; Orthodontics

Alveolar Bone Loss ; diagnosis ; Alveolar Process ; Humans

BACKGROUND: Repeated dis/re-connection of implant abutment caused bone loss around implant fixtures due to the new formation of biologic width of the mucosal-implant barrier. The aim of this clinical study was to evaluate whether the repeated dis/re-connection of implant abutment cause bone loss clinically and the effect of cleansing methods on a bone loss during the early healing period. METHODS: A total 50 implants were installed in 20 patients and repeated dis/re-connection of abutment was performed at the time of surgery and once per week for 12 weeks. 0.9% normal saline solution as group1 and 0.1% chlorhexidine solution as group 2 was used to clean abutments. All patients had radiographs taken at the placement of implant and 4, 8, and 12 weeks postoperatively. The data for bone loss around implant were analyzed. RESULTS: The marginal bone loss at 12 weeks were 1.28+/-0.51mm, 1.32+/-0.57mm in the mesial and distal sides in group1, 1.94+/-0.75mm, 1.81+/-0.84mm in group 2, respectively. In view of marginal bone loss, there was not a significant statistical difference between groups. CONCLUSIONS: Repeated dis/re-connection of implant abutment may not cause marginal bone loss around implant fixture although limited samples and short-term observation period. In spite of more bone loss in group 2, there was no statistical significant difference between groups. In context of those results, the clinical significance of the repeated dis/re-connection of implant abutment and the cleansing method of abutments is debatable when it comes to marginal bone loss during early healing period.
Alveolar Bone Loss ; Chlorhexidine ; Humans ; Sodium Chloride

The purpose of this study was to investigate the causes of food impaction and to explore solutions as well. For this study, 39 patients with food impaction wee selected. 77 contact areas in these patients were investigated mobility, tightness of contact area, gingival index, plaque index, attachment loss, alveolar bone loss, proximal caries, marginal ridge distance and occlusal relationships. The results were as follows ; 1. Teeth without distal support were found to be the most frequent site of food impaction (41.6%). Food impaction was found to be more frequent in the upper teeth (66.2%) than the lower teeth (33.8%). 2. Food impaction was found in tight contact cases (71.4%). Alveolar bone loss was not found in the early stage of food impaction (83.1%) 3. The distance between the marginal ridges of food impaction sites (mean=0.48mm) was shorter than that of the control group. (mean=0.77mm) (p<0.001) 4. In 18.2% of t he cases, proximal carries were found at the food impaction site. 5. Food impaction affected patient's occlusion with the following frequencies ; cusp to marginal ridge relationship (72.7%), cusp to fossa relationship (3.9%) and stepped relationship (23.4%).
Alveolar Bone Loss ; Humans ; Periodontal Index ; Tooth

PURPOSE: Implant beds with an insufficient amount of cortical bone or a loss of cortical bone can result in the initial instability of a dental implant. Thus, the objective of this study was to evaluate the effect of bone cement grafting on implant initial stability in areas with insufficient cortical bone. METHODS: Two different circumferential defect depths (2.5 mm and 5 mm) and a control (no defect) were prepared in six bovine rib bones. Fourteen implants of the same type and size (4 mm x 10 mm) were placed in each group. The thickness of the cortical bone was measured for each defect. After the implant stability quotient (ISQ) values were measured three times in four different directions, bone cement was grafted to increase the primary stability of the otherwise unstable implant. After grafting, the ISQ values were measured again. RESULTS: As defect depth increased, the ISQ value decreased. In the controls, the ISQ value was 85.45+/-3.36 (mean+/-standard deviation). In circumferential 2.5-mm and 5-mm defect groups, the ISQ values were 69.42+/-7.06 and 57.43+/-6.87, respectively, before grafting. These three values were significantly different (P<0.001). After grafting the bone cement, the ISQ values significantly increased to 73.72+/-8.00 and 67.88+/-10.09 in the 2.5-mm and 5.0-mm defect groups, respectively (P<0.05 and P<0.001). The ISQ value increased to more than double that before grafting in the circumferential 5-mm defect group. The ISQ values did not significantly differ when measured in any of the four directions. CONCLUSIONS: The use of bone cement remarkably increased the stability of the implant that otherwise had an insufficient level of stability at placement, which was caused by insufficient cortical bone volume.
Alveolar Bone Loss ; Bone Cements ; Dental Implants ; Ribs ; Transplants*

PURPOSE: The aim of this study was to determine whether the panoramic mandibular index (PMI) is useful for assessing bone mineral density. We also analyzed the potential correlations between PMI parameters and patient age. MATERIALS AND METHODS: Four observers measured the PMI of both sides of the mental foramen using a picture archiving and communication system and images in the Digital Imaging and Communications in Medicine format. They studied 300 panoramic radiographic images of patients belonging to the following age groups: 40–49 years, 50–59 years, 60–69 years, 70–79 years, and 80–89 years. The observers were allowed to zoom in or out and to adjust the contrast of the images. Further, they were instructed to record the reasons for any measurements that could not be made. Then, we conducted a reliability analysis of the measured PMI and assessed the correlations between different patient age groups and the 3 parameters used for determining the PMI from the available data. RESULTS: Among the 600 data items collected, 23 items were considered unmeasurable by at least 1 observer for the following 4 reasons: postoperative state, lesion, unidentified mental foramen, and alveolar bone loss. The intraobserver reproducibility of the measurable data was 0.611-0.752. The mandibular cortical width (MCW) decreased significantly as patient age increased. CONCLUSION: PMI had limited usability when the margin of the mental foramen was not clear. In contrast, MCW, a parameter used for determining the PMI, had fewer drawbacks than the PMI with respect to bone mineral density measurements and exhibited a significant correlation with patient age.
Alveolar Bone Loss ; Bone Density ; Humans ; Mandible ; Radiography

Oligonucleotide drugs have the characteristics of targeting, modifiability and high biosafety. Recent studies have shown that oligonucleotide can be used to make biosensors, vaccine adjuvants, and has the functions of inhibiting alveolar bone resorption, promoting jaw and alveolar bone regeneration, anti-tumor, destroying plaque biofilm, and precise control of drug release. Therefore, it has a broad application prospect in the field of stomatology. This article reviews the classification, action mechanism and research status of oligonucleotide in stomatology. The aim is to provide ideas for further research and application of oligonucleotide.
Humans ; Alveolar Bone Loss ; Biofilms ; Bone Regeneration ; Oligonucleotides ; Oral Medicine

Resorption of alveolar bone that occurs following tooth extraction is irreversible, it may compromise the restoration of implants or conventional prostheses. Ridge preservation can minimize ridge resorption after tooth extraction. In this article, healing features of socket after tooth extraction, factors influencing ridge remodeling, and the use of bioma-terials were reviewed.
Alveolar Bone Loss ; Alveolar Process ; Alveolar Ridge Augmentation ; Humans ; Tooth Extraction ; Tooth Socket ; Wound Healing

Adequate bone volume is the primary condition for successful dental implants. However, sufficient bone volume is often encountered in the vertical direction, but the bone volume in the buccolingual direction is insufficient, making it less suitable to be implanted. If the traditional spitting technique is used in the mandible, fracture and necrosis can easily occur in the labial (buccal) bone plate due to the absence of elasticity, thick cortical bone, poor blood supply, and anastomotic branch. The two-stage ridge splitting technique can be used in patients with narrow alveolar ridge in the mandible. This study summarizes the principles and conditions of application, operational points, clinical efficacy, and analysis of the causes of buccal bone plate absorption.
Alveolar Bone Loss ; Alveolar Process ; Alveolar Ridge Augmentation ; Bone Transplantation ; Dental Implantation, Endosseous ; Dental Implants ; Humans ; Mandible ; surgery

The purpose of this study was to observe bone apposition and marginal bone loss and to check the possibility of success on titanium implant, HA coated implant and the implant with natural coral that were place immediately after teeth extraction in dogs. Experimental subjects were divided into 4 groups ; the 1st group is the titanium implant, second the HA coated implant, third the implant with natural coral, and the last the control group that was prepared in the extraction sockets. After 12 weeks, the dogs were sacrificed for visual observation and microscopic examination approaching histologic and histomorphometric analysis. The results were as follows : 1. Neither the infection nor the exposure of implant was found at the sites of all implant. 2. In a histomorphometric analysis, mean percentage of direct bone contact with the titanium implant was 80.7% and the HA coated implant showed 81.5% apposition, but the implant with natural coral showed 64.9% apposition(P<0.05). 3. In a microscopic examination, mature lamellated bone was found around the immediate implants and control group, while unabsorbed natural coral around the immediate implants with natural coral was found. 4. All immediate implant groups showed the loss of marginal bone in order from implant with natural coral, titanium implant, and HA coated implant. 5. Implant with natural coral that was placed by the type I interface of the Barzilay's classification immediately after teeth extraction showed low percentage of direct bone contact area, low success rate and a lot of marginal bone loss. Above results suggested that the immediate implants are osseointegrated successfully, although slightly marginal bone was loss.
Alveolar Bone Loss* ; Animals ; Anthozoa ; Classification ; Dogs ; Titanium ; Tooth