Benzene ; poisoning ; Chronic Disease ; Female ; Humans ; Middle Aged ; Occupational Diseases

Objective To understand the relationship between childhood non-intentional injury and socio-economic status (SES) in Jiangxi province. Methods Nearly 100 000 households were selected by PPS sampling method, in Jiangxi province. All children aged 0-17 years in selected households were surveyed using an 'injury questionnaire'. SES was calculated under the World Bank method. Results 98 335 children were surveyed and the identified number of non- intentional injury cases was 5429 and with 52 fatal cases. The morbidity was 5.52% and mortality was 52.88/100 000. The mortality of children with higher SES was lower than that of other groups but without statistical significance. The morbidity of moderate injury increased with the increasing SES, also without statistical significance. However, the morbidity of severe injury in male children decreased with the increasing SES. Rates of moderate injury morbidities of fall and road traffic injury also increased with the increasing SES. Moderate injury morbidity caused by animals decreased with the increasing SES. Severe injury morbidity of fall decreased with the increasing SES. Conclusion The morbidity of injury in children was affected by the SES and the relationship between injury and SES varied along with the results of different types of injuries.

The development of printing ink is a challenge for binder jetting 3D printed preparations, which directly determines the quality of the printed product. This study adopted a 2³ full-factor Design of Experiment (DoE) with three central points to optimize the printing ink composition of levetiracetam 3D printed dispersible tablet based on the concept of Quality by Design. Firstly, using polyvinyl pyrrolidone K30, glycerin and polysorbate 20 as independent variables based on 40% (v/v) isopropanol aqueous solution, and weight variation, hardness, friability and dispersion uniformity of the printed tablets were used as dependent variables. Then obtained the design space of the printing ink prescription by DoE model analysis, and the response optimizer was used to obtain the optimal printing ink prescription: isopropanol aqueous solution containing 0.1% (w/w) polyvinyl pyrrolidone K30 and 4.0% (w/w) glycerin. The jetting mechanism and wettability of the printing ink were analyzed, and different strengths of personalized 3D printed tablets were prepared and characterized, which verified the rationality of the printing ink formulation. This study provided a reference for the development of printing ink for binder jetting 3D printed preparations.

OBJECTIVETo explore the morbidity, mortality, and disease burden of traffic injury in children aged 0-17 years so as to develop a related strategy on prevention.

METHODS100,000 households were selected by PPS sampling method in Jiangxi province. All children aged 0-17 years in selected households were interviewed by trained interviewers using a standardized 'traffic injury questionnaire'.

RESULTSThe overall mortality and fatality rates of traffic injury were 10.17/100,000 and 1.36% respectively while the traffic injury morbidity in children of 0-17 years old was 7.40 per thousand. Morbidity in males was 8.29 per thousand compared to 6.26 per thousand in females. Severe cases accounted for 1.79 per thousand of the total but those living in urban area appeared to be 0.93 per thousand compared to 1.88 per thousand in the rural area, with statistical significance. Pedestrian and cyclists related injuries accounted for 80.48% of all the injured children. The average medical cost per case was 1369.57 Yuan with an average of 3.63 days of hospitalization. The average days of missing school/working was 8.79.

CONCLUSIONThe morbidity and mortality among male children were higher than those among female children. The morbidity of severe traffic injury cases in children living in rural area was higher than that of children living in urban area. The disease burden of traffic injury in Jiangxi province was heavy and the development of relative intervention strategy seemed urgent in Jiangxi province.

Accidents, Traffic ; economics ; mortality ; statistics & numerical data ; Adolescent ; Cause of Death ; Child ; Child, Preschool ; China ; Cost of Illness ; Female ; Humans ; Infant ; Infant, Newborn ; Male ; Morbidity ; Sampling Studies ; Surveys and Questionnaires

OBJECTIVETo evaluate clinical applicability of a novel technique that can quantify the lamivudine-resistant mutants of hepatitis B virus (HBV) in the serum of patients utilizing gene microarray technology.

METHODSThe oligonucleotide microarray was designed to detect 3 important mutational positions. Fifty-one patients who were receiving lamivudine therapy were selected as subjects. The oligonucleotide microarray and traditional sequencing were applied to detect the lamivudine resistant mutation, the monitoring lasted for 24 months. Then the clinical result was analyzed and the obtained data were compared between the two methods.

RESULTSLamivudine resistant mutation was detected in 39 percent of the patients during the 2 years period. The results of the oligonucleotide microarray technique was consistent to the results of traditional sequencing in accuracy and the miroarray was more sensitive in detection of the mixed infection.

CONCLUSIONApplication of the oligonucleotide microarray for quantitative detection of lamivudine-resistant mutation of HBV is feasible.

Antiviral Agents ; therapeutic use ; Drug Resistance, Viral ; Female ; Hepatitis B ; drug therapy ; virology ; Hepatitis B virus ; drug effects ; genetics ; isolation & purification ; Humans ; Lamivudine ; therapeutic use ; Male ; Mutation ; Oligonucleotide Array Sequence Analysis ; methods

Objective To evaluate the value of three-dimensional contrast-enhanced angiography (3D CE MRA) and MRI in the diagnosis and delineation of cerebral arteriovenous malformation(AVM). Methods Twenty-two cases of cerebral AVM examined by MRI and 3D CE,MRA.DSA was performed in 17 cases.A three-dimensional fast low angle shot (3D FLASH) was used for 3D CE MRA with Gd-DTPA dosage of 0.2 mmol per kilogram for body weight.The source images were subtracted from mask images and transferred to computer workstation using three-dimensional reconstruction.Results Among 22 cases, 19 showed typical AVM“flow void”signal on MR images.3D CE MRA clearly displayed the nidus,feeding artery and draining vein.All of the foci were above the cerebellum tentorium.13 located within one lobe, 3 exceeded one lobe and 3 situated in the deep of cerebrum.Feeding arteries were derived from single artery in 9 cases,and mixed supply in 10 cases.Draining veins diverted to sagittal sinus and/or sigmoid sinus in 6,deep cerebral veins in 8 and mixed in 5.In the 14 cases examined by both DSA and 3D CE MRA,3D CE MRA was superior to DSA in three-dimensional demonstration of the nidus,but inferior to DSA in demonstration of some details.3D CE MRA depicted 78.4% feeding arteries and 84.0% draining veins in addition,tiny pathologic blood vessels smaller than 1 centimeter were detected by DSA,but could not be found by 3D CE MRA and were only shown as hemorrhage lesions on MR images in 3 cases.Conclusion As a non-invasive technique,3D CE MRA combined with MRI is accurate in diagnosis and localization of cerebral AVM,and should be used as the first choice for those clinically suspected of AVM.But DSA remains needed for demonstration of details and tiny AVM.

The efficient and safe delivery of drugs to the therapeutic site through the biofilm has traditionally been a difficult and hot topic in the field of drug delivery. In recent years, alkyl polyglycoside (APG) have become ideal penetration enhancers for drug delivery systems because of their high permeability, good safety and biodegradability, which has attracted wide attention of domestic and foreign researchers. In this paper, the physical and chemical properties, characteristics, action mechanism and application of APG in drug delivery system are reviewed, and its application prospect in drug delivery system is prospected.

Growth year is one of the important factors for the quality of Polygala tenufolia. In this study, primary metabolites and secondary metabolites were compared in 1, 2 and 3 years old P. tenufolia cultivated in Shaanxi Heyang. The samples were subjected to ultra-high performance liquid chromatography (UPLC)-quadrupole time-of-flight mass spectrometry (Q-TOF MS) and nuclear magnetic resonance (NMR) analysis, and the obtained data were analyzed using principal component analysis (PCA) and other statistical analysis methods. In addition, content and correlation of different metabolites were also calculated. The results showed no significance between main component contents in 2 year-old and 3 year-old P. Tenufolia, but 1 year-old was statistically different. The contents of primary metabolites, such as fructose, sucrose, and choline increased as time goes on, while glycine and raffinose decreased. The contents of secondary metabolites, such as onjisaponin Fg, polygalasaponin XXVIII, polygalasaponin XXXII increased, while polygalaxanthone III and parts of oligosaccharide multi-ester including tenuifoliose A, tenuifoliose C, tenuifoliose C2 and tenuifoliose H decreased with the extension of the growth years. Growth years has important impact on the quality of P. tenuifolia and the existing growing years of commodity P. tenuifolia have its scientific evidence. This study supplied a new method for the quality evaluation of Chinese medicinal materials.
Chromatography, High Pressure Liquid ; Drugs, Chinese Herbal ; Magnetic Resonance Spectroscopy ; Mass Spectrometry ; Metabolomics ; Oligosaccharides ; Plants, Medicinal ; chemistry ; Polygala ; chemistry ; Quality Control

Objective To prepare PLGA/PEG microsphcres for sustained release of bovine serum albumin (BSA), and evaluate the effect of the micrnsphere composition, proportion of the components and integration of PEG on the size, BSA encapsulation rate and in vitro BSA release properties of the microspheres. Methods BSA-loaded PLGA/PEG microspheres were prepared by water-in-oil-in-water double emulsions-solvent evaporation method (W/O/W). The morphology of the microspheres was observed with scanning elect'on microscope, the diameter was determined by Mastersizer 2000, and the encapsulation efficiency and in vitro BSA release were evaluated by UV spectrophotometry. Results Increased GA to LA ratio was associated with increased size of the microspheres and accelerated BSA release. The incorporation of PEG obviously increased the BSA encapsulation rate to as much as 88.22% with also increased BSA release rate. The BSA-PLGA/PEG biodegradable microspheres prepared was characterized by high encapsulation rate, low burst release, and slow BSA release for over 3 weeks at high drug concentrations. Conclusion BSA-PLGA/PEG microspheres with relatively high encapsulation efficiency and proper drug loading can be prepared by adjusting the parameters during the preparation process.

OBJECTIVETo investigate maternal-fetal transmission at human bocavirus (HBoV).

METHODSIgG antibody to HBoV in serum samples of 316 mothers were determined with ELISA and HBoV DNA was determined with real time PCR in the sera of the mothers and their infants.

RESULTSHBoV-IgG was positive in 40.20 percent (127/316) of the mothers, while it was positive in 29.43 percent (93/316) of the cord blood specimens of the infants. The difference between the two groups was significant (X2=8.12, P less than 0.005); 93 samples of both the mothers and the infants were positive for HBoV-IgG.

CONCLUSIONHBoV-IgG can cross the placenta to the fetuses through placenta. Further study is needed to answer the question whether vertical maternal-fetal transmission occurs.

Adult ; Antibodies, Viral ; blood ; Bocavirus ; DNA, Viral ; blood ; Enzyme-Linked Immunosorbent Assay ; Female ; Humans ; Immunoglobulin G ; blood ; Infant, Newborn ; Infectious Disease Transmission, Vertical ; Parvoviridae Infections ; transmission ; Pregnancy ; Prospective Studies